Donau Danumeric 340 pirkti naudotą (2 539)

Būklė: visiškai atnaujintas (naudotas), Apsisukimų plokštės remontas įvairiems modeliams. Susisiekite su mumis, jei pavarų lygiai nebeveikia tinkamai, kaip pageidaujate. Fodpfxsy Rfzus Ahrjgd

Būklė: naudotas, Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 4 000 mm, padavimo eiga Y ašimi: 1 050 mm, padavimo ilgis Z ašis: 200 mm, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Dimensions and Travel Paths Tool holder: SK 40 Table dimensions (mm): 4000 x 800 Number of T-slots: 6 T-slot spacing (mm): 140 Distance - spindle lower edge min. (mm): 140 Distance - table upper edge max. (mm): 740 Drilling radius min (mm): 540 Drilling radius max (mm): 1590 U-axis travel (mm): 2600 Y-axis travel (mm): 1050 Quill stroke (Z-axis) (mm): 200 Column stroke (W-axis) (mm): 400 Machining Performance Drilling capacity in solid material: St 60 (mm): 40 GG 22 (mm): 50 Tapping: St 60: M 36 GG 22: M 42 Main Spindle Drive AC motor, frequency-controlled (kW): 5.5 at 100% duty cycle Speed range (rpm): 15 - 2800 Torque (Nm): max. 250 Constant torque range (rpm): 15 – 200 Feed Drives X-axis – AC servo motor (kW): 0.25 Y-axis – AC servo motor (kW): 0.25 Z-axis – AC servo motor (kW): 4.50 W-axis – AC servo motor (kW): 2.50 U-axis – AC servo motor (kW): 2.50 Rapid traverse speeds (X/Y/Z) (m/min): 7.5 / 7.5 / 5 Rapid traverse speeds (U/W) (m/min): 7.5 / 3 Feed rates, stepless (mm/min): 5 - 2000 Feed force (N): 12000 Accuracy Positioning accuracy X, Y-axis (over 1200 mm) (mm): ±0.075 Repeatability X, Y-axis (mm): ±0.03 Positioning accuracy Z-axis (mm): ±0.05 Repeatability Z-axis (mm): ±0.03 Positioning accuracy W-axis (mm): ±0.05 Repeatability W-axis (mm): ±0.03 Electrical Data Operating voltage/frequency (V/Hz): 400 / 50 Control voltage (V): 24 Total connected load (kVA): 13.0 CNC Control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat panel, backlit, easily readable from all sides Position display: Cartesian or polar, dimensions absolute or incremental Units: mm or inch, as well as degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions based on machining type, material-dependent cutting data recommendations Tool management: Up to 500 tools Subprogram support: yes Machining cycles: Cycles for centering, drilling, tapping, reaming, countersinking, and boring; freely programmable cycle for special tools; dwell time possible for each cycle Chip breaking / chip removal: possible during drilling cycle Drilling patterns: drill row, bolt circle, matrix Basic software: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted start Datum determination: Cycles for determining zero points by manual probing of the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle determination for round parts by probing reference edges/surfaces Data interfaces Paintwork with signs of use Standard paint, two-component textured paint Fgjdey Ttrtjpfx Ahrsd Machine upper part: light grey RAL 7035 Machine lower part: light blue RAL 5012 Documentation Operating and programming manual Electrical circuit diagram Spare parts drawings Test report for mechanics, electrical system, and safety equipment

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, plunksnos brūkšnys: 190 mm, veleno greitis (min.): 41 aps./min, veleno greitis (maks.): 1 800 aps./min, bendras svoris: 1 920 kg, ruošinio svoris (maks.): 17 kg, plieno lakšto storis (maks.): 32 mm, sukimo momentas: 250 Nm, stalo aukštis: 900 mm, Used DONAU quick radial drilling machine type DR 32 - fully overhauled by vaumatec in 2022 - equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 leveling feet to relieve table frame load) Technical Data: Drilling capacity (solid): Steel 60/E335 mm Ø 32 (with feed rate 0.20 mm/rev): Cast iron 22 mm Ø 45 Tapping: Steel 60/E355 M26 Tapping: Cast iron 22 M35 Tool holder: MT4 Column diameter: mm Ø 195 Distance spindle nose to table: min./max. mm 260/660 Working table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds range I: rpm 41-1800 Feeds: mm/rev 0.1-0; 15-0; 20-0.3 Fedjrn Riqjpfx Ahregd Max. spindle torque: Nm 250 Arm mobility, radial: N 25 Arm mobility, axial: N 25 Clamping force, radial: Nm 3500 Clamping force, axial: N 5500 Feed force: N 7500 Max. allowable mass: kg 17 Max. allowable inertia: kgm 0.002176 Workpiece: Max. table load: kg 1000 Center of gravity: in the center of the working surface

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamintojas: KNAPP-DONAU Modelis: UZFM Pagaminimo metai: 1974 Būklė: naudotas Kaina & Vieta Vieta: Rostokas, Vokietija Frezavimo ilgis: 1800 mm Frezavimo plotis: 260 mm Didžiausias modulis: 10 mm Stalo matmenys, įskaitant vandens lataką: 460 x 2100 mm Fedpfxoy Rgmro Ahrogd Prispaudimo paviršius: 250 x 1850 mm Didžiausias frezos plotis: 100 mm Frezavimo stumoklio pastūma, bepakopė: 0 – 500 mm/min. Greitoji eiga: 3000 mm/min Frezavimo galvutė pasukama: ±30° Frezavimo veleno sūkių diapazonas, 9 žingsniai: 29–178 aps./min. Frezavimo galvutė pasukama į abi puses nuožulniai dantavimui: 30° Staklių svoris: apie 35 t Erdvės poreikis: apie 4 x 1,85 x 1,85 m Įranga/priedai: - 11 spaustuvų - Pakeičiami krumpliaračiai - Tvirtinimo įranga - Dokumentacija

Būklė: naujas, SPS pavarų perjungimo plokštė Nauja vietoj senos Savarankiškam montavimui arba montavimui vieno iš mūsų technikų Fgodpey Rkkhjfx Ahrjd

Būklė: beveik kaip naujas (naudotas), Tinka Jūsų Donau DR 28Z, DR 40Z, DR 40 Digi, Danuflex 128 Fgsdpfx Aoy Ri Hnjhrjd

Būklė: naudotas, Gamybos metai: 2007, Drilling capacity in steel (diameter): 40 mm Throat depth: 1050 mm Spindle speed: 15 – 2800 rpm Feed range: 0.075 – 0.45 mm/min Dimensions (LxWxH): 2450 x 1300 x 2300 mm Weight: 1500 kg Equipment: • Machine in top condition • Serviced and overhauled by factory customer service in 2026 Machine configuration: • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed control • Infinitely variable quill feed via three-phase servomotor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Centralized lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and travels: Tool holder: SK 40 Column diameter: 195 mm Table size: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill stroke (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table min: 70 mm, max: 680 mm Distance spindle nose – floor min: 970 mm, max: 1580 mm Drilling radius: 540 – 1590 mm Work table height: 900 mm Machining performance: Drilling capacity (full) St 60: Ø 40 mm GG 22: Ø 50 mm Tapping capacity St 60: M36 Fodpfx Asy Nd T Hohrsgd GG 22: M42 Main spindle drive: AC motor, frequency-controlled, 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Max. torque: 250 Nm Constant torque from 15 – 2000 rpm Feed drives: X-axis – AC servomotor: 0.25 kW Y-axis – AC servomotor: 0.25 kW Z-axis – AC servomotor: 4.50 kW W-axis – AC servomotor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Infinitely variable feed: 5 – 2000 mm/min Accuracy: Positioning accuracy X-, Y-axis over 1200 mm: ± 0.075 mm Electrical data: Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight Danumeric 440 (without packaging), with table 1800 x 600 mm: 2800 kg CNC Control: Axes: 3 (X, Y, Z) Processor: 32-bit CPU Display: TFT flat screen, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values, unit: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining operation, material-dependent cutting data recommendations Tool management capacity: max. 500 tools Subroutine technology: yes Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point detection: Cycles for determining zero points by manual probing of the workpiece for: – arbitrarily clamped rectangular parts – arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle position detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Būklė: geras (naudotas), Automatinis perforatorius Kugler 340-2R Įrenginys labai geros būklės. Komplekte – perforavimo įrankis 3:1 apvalia skylute ir papildomi įrankiai. Gamintojo aprašymas: Perforavimo įrenginys, skirto darbo pločiui iki 340 mm; Įrenginys pritaikytas nepertraukiamam darbui ir didelėms apkrovoms; Unikali „dviejų pirštų“ sistema užtikrina puikų įvairaus gramatūros popieriaus paėmimą; Dviejų lentynų padavėjas leidžia dirbti nenutrūkstamai; Po perforavimo lakštai sukasi aplink specialų būgną, todėl priėmimo stotyje išlieka teisinga puslapių seka; Galimybė naudoti dviejų dalių juosteles, leidžiančias perforuoti tiek knygas, tiek kalendorius; Fodpfxswt Stve Ahregd Perforavimo storis vienu ciklu – iki 3 mm; Greitas ir paprastas perforavimo juostelių keitimas; Galimybė naudoti juosteles su arba be išpjovos pakabukui. Priėmimo pusėje įrengtas kratytuvas. Maksimalus darbinis plotis: 340 mm; Minimalus formato dydis: 120x105 mm; Maksimalus formato dydis: 340x340 mm; Maksimalus pjovimo storis: 3 mm; Mechaninių ciklų per minutę: 80-100; Maitinimas: 380 V; Svoris: 1580 kg.

Būklė: paruoštas naudoti (naudotas), DONAU DR 23 - greita radialinė gręžimo staklė - Gręžimo našumas / Plienas apie 28 mm - Išsikišimas 700 mm - Morse kūgis MK 3 - Apsisukimų diapazonas 70-1550 aps./min. (transmisija) - Automatinės padavimas 0,075-0,3 mm Fgjdpfx Asy Uv Tvehred - Sriegimo įtaisas - Gręžimo gylis apie 130 mm - Hidraulinis užspaudimas - Dokumentacija Matmenys: Ilgis x Plotis x Aukštis 2x1,7x1,9 m / Svoris 1900 kg Galimi netikslumai ar įvedimo klaidos.

Būklė: naudotas, Gamybos metai: 1968, Donau greito sukinio radialinė gręžimo staklės, tipas DR 32 Sukimosi greitis: 60 - 1800 aps./min Strėlės išsikišimas: 600 mm Pagrindo plokštė: 100 x 1400 x 110 mm Sriegimo įrenginys Aušinimo skysčio sistema Staklių lempa Greito keitimo laikiklis su įdėklais Staklinis spaustuvas Fgsdpfx Asx Hgkvehrod

Būklė: naudotas, Gamybos metai: 1987, Siūlome šį naudotą greitaeigį radialinį gręžtuvą Donau DR 40-Z, pagamintą 1987 m. Gamintojas: Donau Modelis: DR 40-Z Serijos numeris: 1146-3 Jei turite klausimų ar reikia daugiau informacijos, rašykite mums žinutę. Įrenginio vieta – Osterode/Harcas. Įrenginį galima apžiūrėti susitarus iš anksto. Tai naudotas įrenginys, todėl parduodamas be jokios garantijos. Fgodpfsy Dn E Nsx Ahrjd

Būklė: geras (naudotas), Gamybos metai: 1965, Funkcionalumas: visiškai funkcionalus, gerklės gylis: 930 mm, For sale: Schnellradial drilling machine by Donau, type DR30 The machine is in good and fully functional condition. Fedpfxewal Hps Ahrogd Technical Data: Year of manufacture: 1965 Drilling capacity in steel (diameter): approx. 30 mm Tapping capacity in steel: approx. M36 in cast iron Spindle taper: MK 3 Spindle speeds: stepless, approx. 45 - 2240 rpm Quill stroke: approx. 170 mm Arm reach: approx. 930 mm Arm swivel range: 360° Table size: 1200 x 500 mm Spindle motor power: 4.0 kW Weight: approx. 1.8 t Dimensions (L x W x H): approx. 1.3 x 2.1 x 2.45 m Equipped with: - Tapping unit with automatic shut-off and reverse - Motorized height adjustment of the arm - Left-hand drilling control, manual and foot operation Transport and loading can be organized Europe-wide on request and at an extra charge. Prices plus VAT An inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Būklė: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Boom travel 1050 mm • Drill spindle MK 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Thread cutting device • 2 x 18 mm T-slots each on the machine base, rear and left • Machine lamp • Centralized lubrication • Table surface machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose - min. mm 40 table surface max. mm 710 Distance spindle nose - min. mm 840 base plate max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Maximum drilling capacity solid Steel 60 Ø 45 Cast iron 22 Ø 55 Thread cutting Steel 60 M 36 Cast iron 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 constant from min⁻¹ 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2600 Fgedpfx Aheynt Ucersd Documentation Operating manual, including Lubrication and hydraulic diagram Wiring diagram

Būklė: naudotas, Gamybos metai: 1989, Gręžimo galia pliene (skersmuo): 32 mm Išsikišimas: 1230 mm Stalo paviršius: 1200 x 500 mm Gręžimo eiga: 180 mm Padavimas – automatinis: 0,10 - 0,15 - 0,20 - 0,30 mm Sūkių diapazonas: 60 - 1800 aps./min Kūginė jungtis: MK 4 Bendra galingumo paklausa: 2,7 kW Fsdpfx Ahsy Aa H Nerogd Staklių svoris apie: 1,8 t Užimamas plotas apie: 2,2 x 1,8 x 2,3 m Greita radialinė gręžimo staklės su: - automatiniu padavimu - sriegimo įrenginiu

Būklė: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Boom travel 1050 mm • Drill spindle MK 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Thread cutting device • 2 x 18 mm T-slots each on the machine base, rear and left • Machine lamp • Centralized lubrication • Table surface machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose - min. mm 40 table surface max. mm 710 Distance spindle nose - min. mm 840 base plate max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Maximum drilling capacity solid Steel 60 Ø 45 Cast iron 22 Ø 55 Thread cutting Steel 60 M 36 Cast iron 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 constant from min⁻¹ 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2600 Fedpeylnpisfx Ahrjgd Documentation Operating manual, including Lubrication and hydraulic diagram Wiring diagram

Būklė: paruoštas naudoti (naudotas), Siūlomas naudotas greito veikimo radialinis gręžimo staklės Donau DR 32, 731 serija. Įrankio laikiklis: MK4, špindelio eiga: 200 mm, ištrauka: apie 900–1050 mm, aukščio reguliavimas: apie 400–600 mm, sūkių diapazonas: 40–2000 aps./min., padavinėjimai: 0,1/0,2/0,3/0,4 mm apsisukimui, integruota aušinimo sistema, su pasukama sija, didelis T formos lizdinis stalas, svoris apie 1500–1800 kg, staklių matmenys X/Y/Z apie 1800/1000/2200 mm. Apžiūra galima pagal susitarimą. Fgsdpfjykut Sjx Ahred

Gamybos metai: 2010, būklė: paruoštas naudoti (naudotas), Drilling capacity steel/cast iron: 25mm/32mm, tapping capacity steel/cast iron: M20/M24, tool holder: MT4, spindle speed: 3500rpm, feed: 1050mm/min, outreach range: 420mm-1320mm, arm travel: 900mm, column vertical travel: 430mm, quill stroke: 140mm, swivel range: 325°, table dimensions X/Y: 1200mm/600mm, drive power: 1.6kW, machine dimensions X/Y/Z: approx. 2500mm/900mm/1500mm, weight: approx. 2200kg. Documentation available. On-site inspection possible. Fgedpfx Aeu N Hdaehrod

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Boom travel 1050 mm • Drill spindle MK 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Thread cutting device • 2 x 18 mm T-slots each on the machine base, rear and left • Machine lamp • Centralized lubrication • Table surface machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose - min. mm 40 table surface max. mm 710 Distance spindle nose - min. mm 840 base plate max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Maximum drilling capacity solid Steel 60 Ø 45 Cast iron 22 Ø 55 Thread cutting Steel 60 M 36 Cast iron 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 constant from min⁻¹ 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12000 Fgodpfoyhdvkox Ahrsd Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2600 Documentation Operating manual, including Lubrication and hydraulic diagram Wiring diagram

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle MK 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each at machine base rear and left • 3-axis digital display • Machine lamp • Central lubrication • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Tool holder MK 4 Column diameter 195 mm Table dimensions 1200 x 750 mm Number of T-slots 5 T-slot spacing 125 mm Quill stroke 220 mm Column travel 450 mm Distance spindle collar - min 40 mm table top max. 710 mm Distance spindle collar - min 840 mm base plate max. 1510 mm Drilling radius min 540 mm max. 1590 mm Working table height 900 mm Machining Capacities Drilling capacity in solid St 60 ⌀ 45 GG 22 ⌀ 55 Tapping St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled 5.5 kW at 100% duty cycle Speed range: 15 - 2800 rpm Torque max. 250 Nm constant from 15 - 200 rpm Feed Drives Infinitely variable feed 0.02 - 0.7 mm/rev Feed force 12000 N Electrical Data Operating voltage / frequency 400 V / 50 Hz Control voltage 24 V Total connected load 9.3 kVA Weight DANUFLEX 145 (without packaging) Fgjdpfxsx Uwpxe Ahrod with table 750 x 1200 mm 2600 kg Documentation Operating manual, including Lubrication and hydraulic diagram Electrical schematic

Būklė: naudotas, Gamybos metai: 1991, veleno tvirtinimas: MK 4, Darbo stalas 600 mm x 1200 mm Konsolės eiga 600 mm Įrankio laikiklis MK 4 Gręžimo geba 40 mm pliene Sriegiklio įrenginys Aušinimo skysčio įranga Fgodpfsx N Iftex Ahrsd Dokumentacija

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 500 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 700 mm, veleno greitis (maks.): 8 000 aps./min, Travelling column machine, completely overhauled in 2025 Clamping table size: 1500 x 1000 mm Table height: 750 mm Number of T-slots: 7 T-slot size to DIN 650: 18 mm Travel paths: X-axis: 1500 mm Y-axis: 1000 mm Z-axis: 700 mm Distance table top – spindle face min/max: 150 / 850 mm Main spindle drive for 8000 rpm Tool holder: SK 40 AC motor, frequency-controlled, 26 kW at 44% duty cycle Speed range: 15 – 8000 rpm Torque: 245 Nm Internal coolant supply (IKZ) Chip conveyor with band filter system Feed drives: X-axis AC servo motor: 3.5 kW Y-axis AC servo motor: 2.0 kW Z-axis AC servo motor: 3.5 kW Rapid traverse rates (X/Y/Z): 30/30/20 m/min Indirect absolute linear measuring system Accuracy: Positioning accuracy X, Y axes over 1000 mm: ± 0.0150 mm Repeatability X, Y axes: ± 0.0075 mm Fgedpfxsw I Tm Se Ahrod Positioning accuracy Z axis: ± 0.0150 mm Repeatability Z axis: ± 0.0075 mm 24-position tool magazine, mounted on the left side of the machine - Tool stations: 24 - Tool shank (DIN 69871 / 69872): SK 40 - Max. tool diameter: 76 mm - Max. tool length: 250 mm - Max. tool weight: 8 kg CNC control: Heidenhain iTNC530

Būklė: naudotas, Gamybos metai: 1991, Darbo stalas 600mm x 1200mm Fgedpfx Asxpfglohred Konsolės eiga 600mm Įrankio tvirtinimas MK 3 Gręžimo pajėgumas 28mm pliene Sriegimo įrenginys Aušinimo sistema Dokumentacija

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 Fjdpjxn A Spjfx Ahrjgd W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1980, Darbo stalas 500 mm x 1200 mm Išsikišimo eiga 600 mm Įrankio tvirtinimas MK 4 Gręžimo galia 32 mm pliene Sriegimo įrenginys Aušinimo įrenginys Apsaugos įtaisas ant grąžto Fgedox N Ih Iepfx Ahrsd Pilnai atnaujintas 2026 m.

Būklė: naudotas, Gamybos metai: 1990, mašinos/transporto priemonės numeris: 2316-3, Ref. No. 10622 Technical Data: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm Fodpfx Ahou Et Nberegd - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min/max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg Equipped with: - Thread cutting unit - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the left side of the machine