Deckel Įrankių Frezos pirkti naudotą (35 231)

Būklė: geras (naudotas), Tool sharpening machine with wet grinding. Pgodoich Elepfx Abzen

Būklė: geras (naudotas), Gamybos metai: 1990, Macmon M 100 E universal milling machine with 2-axis Elesta-Heidenhain digital readout from a training department, fixed table, SK 40 spindle taper. Good, ready-to-operate condition, can be demonstrated under power by arrangement. Pgjdpfxorazzrs Abzjn

Būklė: geras (naudotas), Gamybos metai: 1995, Macmon M 100 E tool milling machine with 3-axis Elesta-Heidenhain digital readout, from a training department, fixed table, SK 40 spindle taper. In good, operational condition; can be demonstrated under power by arrangement. Pgjdpfxov Azb Ne Abzen

Būklė: geras (naudotas), Gamybos metai: 1980, Deckel FP3 įrankinė frezavimo staklė su 3 ašių Heidenhain skaitmenine indikacija, standus stalas, SK 40 veleno tvirtinimas, priedai: įvairios spaustuvo įvorės ir frezos ašys, laikiklis. Geros darbinės būklės. Pagal susitarimą galima parodyti veikiančią. Pedpfxexdr Uxe Abzogn

Būklė: geras (naudotas), Gamybos metai: 1979, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1137.05, Naudota įrankių šlifavimo staklė Gamintojas: KAPP Modelis: AST305B Pagaminimo metai: 1979 Pgsdpfx Aowzk R Nobzjn Serijos numeris: 1137.05 Su priedais

Būklė: beveik kaip naujas (naudotas), Gamintojas: Kennametal Skersmuo: 500 mm Dantų skaičius: 62 Pjdpfxjyryd Es Abzegn Galimas kiekis: 2 vnt.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Įrankinė frezavimo staklė Macmon M 100 NC Bežingsninis apsukų reguliavimas, Įrankio laikiklis SK 40 Aušinimo įrenginys Psdox Hga Depfx Abzegn Eksploatacijos instrukcija

Būklė: dilaminuotas dirbtuvėje (naudotas), Please read the technical specifications thoroughly. If the machine is a potential investment for you, we kindly request that you provide full proof of identity, including a valid telephone number and email address, for quotation purposes. Deckel FP1 AKTIV (3-axis active) Machine number: 2102-5745 Year of manufacture: approx. 1988 Travel distances: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40-2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment: - Active 3-axis digital readout HEIDENHAIN type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Quill travel on vertical milling head: 60 mm - Vertical milling head swivelable and extendable horizontally by 100 mm - Coolant system (coolant tank integrated in the machine base) - Documentation - Central lubrication Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been cosmetically refurbished and technically inspected. Geometry inspection videos can be provided upon request. Backlash Y-axis: 0.15 mm Backlash X-axis: 0.3 mm Backlash Z-axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Parallelism deviation Y-axis: 0.002 mm (measuring distance 150 mm) Parallelism deviation X-axis: 0.002 mm (measuring distance 300 mm) The following parts have been replaced: - Central lubrication system checked - Heidenhain digital display overhauled - Scraper set installed - LEDs in active display replaced - Oil change performed - Vertical milling head newly mounted - Oil sight glass replaced Pgodpjxpwfgsfx Abzjn Price: net, loaded ex-stock

Būklė: geras (naudotas), Please read the technical specifications thoroughly. If the machine is a potential investment for you, we request your complete identification, including a correct telephone number and email address, in order to provide a quotation. DECKEL Tool Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel paths: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Extension of working area to: 300 x 260 mm Spindle speed, vertical/horizontal: 40 – 2,000 rpm Gear steps: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill stroke: 60 mm Feed X/Z axis: 5 – 500 mm/min Feed control: stepless Rapid traverse, X/Z axis: 1200 mm/min Feed Y axis: manual Fixed angle table: 600 x 210 mm Swivel vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data subject to confirmation! Features: For horizontal machining, the milling head is swiveled by 90 degrees and pushed to the rear. 3-axis precision digital readout HEIDENHAIN Stepless feed in X/Z axis The machine was partially overhauled by a specialist company several years ago. Equipment: 3-axis digital readout HEIDENHAIN Micro coolant spray unit Podpfx Aboxyc Tkjzjgn Fixed angle table Chip tray Machine lamp Machine feet Further accessories on request! Condition: Good to very good, from training workshop Available from March 2026

Būklė: naudotas, Geldmacher MST / Deckel FP4M Milling Machine, Tool Milling Machine Weight: approx. 1,450 kg Year of manufacture: 2012 Installation dimensions / Size: Reference: approx. 2,500 × 2,700 × 2,100 mm (Length × Width × Height) Travel distances: X: approx. 500 mm Y: approx. 400 mm Z: approx. 400 mm Psdpfx Abjxcldkezogn Spindle taper / Tool holder: SK 40 Quill stroke: Vertical quill: approx. 90 mm extension; additionally, the vertical milling head can be moved on the ram Spindle speed range: approx. 50 - 2,500 rpm Feed rates: Feed: approx. 8 - 630 mm/min; Rapid traverse (maximum feed rate) approx. 1,300 mm/min The machine is in very good condition. You are welcome to arrange a viewing. We can organise affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can be issued. The prerequisite is a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers. Company names and trademarks mentioned are property of their respective owners and are used for identification and product description purposes only. Deviations from technical data as well as errors in the item description are possible and subject to change.

Būklė: naudotas, Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 140014, X ašies eiga: 760 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (maks.): 8 000 aps./min, veleno tvirtinimas: MK 4, stalo ilgis: 1 270 mm, stalo plotis: 305 mm, bendras aukštis: 2 390 mm, bendras ilgis: 2 170 mm, bendras plotis: 2 510 mm, bendras svoris: 2 500 kg, ruošinio svoris (maks.): 200 kg, valdiklio modelis: Siemens 828 D, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Parduodama CNC frezavimo staklės V 760 L by MMD. Staklės nuo 2014 metų dirbo viena pamaina, turi įprastus naudojimo žymių, tačiau yra visiškai veikianti ir iki šiol dirba tiksliai bei patikimai. Techninė įranga: Valdymas: Siemens 828 D Automatinis įrankių keitiklis Įeina 3D matavimo jutiklis Pgedpfjxnnb Nox Abzsn Automatinis įrankių matavimas Staklės prijungtos prie elektros tinklo ir gali būti bet kada apžiūrimos veikimo metu Būklė: Naudotos, prižiūrėtos, techniškai nepriekaištingos. Reguliariai prižiūrėtos, paruoštos darbui. Metai: 2014 Darbo režimas: viena pamaina Apžiūra ir bandomasis paleidimas galimi susitarus.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Tool Milling Machine Emco C40 Linear with Digital Readout and Contour Control – Excellent Condition, CE-Compliant! Technical Data: - Year of manufacture: 2008, Machine No. BA1DW2501 - Milling table clamping surface: 800 x 400 mm - T-slots: 8 - Slot width: 14 H8 - Distance between slots: 50 mm - Max. load: 300 kg - Infinitely variable spindle speeds: 10–5000 rpm - Infinitely variable feed rate: 10–2000 mm/min - Rapid traverse X-axis: 5000 mm/min - Travel X/Y/Z: 450/350/400 mm - Vertical quill and horizontal quill – SK40 - Hydraulic clamping system - Quill stroke: 80 mm - Weight: approx. 2000 kg - Dimensions (LxWxH): approx. 2.5 x 2 x 2 m Psdowxxdfspfx Abzogn - Main drive motor: 7 kW - Spindle brake - Technical documentation, spare parts diagrams, operating instructions - Swing-type guarding/cabin - Coolant system - Machine lamp - Dividing attachment with tailstock - Counter support - Röhm machine vice About the Machine: On offer is a tool milling machine Emco C40 Linear with contour control. This universal milling machine is in nearly new condition. It comes from a government facility where it was only rarely used. The control is very user-friendly. Additionally, the machine has hydraulic clamping in both vertical and horizontal positions. Conversion from vertical to horizontal is very simple, thanks to the pivoting vertical head. The Emco has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the machine under power on site.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP2 repowered by FPS, year of manufacture 2013, equipped with 3-axis Heidenhain ND 780 digital readout. Like new condition! Technical data: - Machine No.: 2202-7020, FPS No.: 3364, year of manufacture 2013 - Fixed angle table - Spindle speed: 40 - 2000 rpm - Feed and rapid traverse on 3 axes - Motor power: 2.2 kW - Travel X/Y/Z: 400/200/400 mm - Equipment: vertical & horizontal spindle - Vertically and horizontally extendable quill – SK-40 - Drawbar system S20x2 - Weight approx. 1,100 kg Accessories and configuration: - 3-axis Heidenhain ND 780 digital readout - Brake motor with instant spindle stop - Centralized lubrication system - 2x emergency stop buttons - Operating manual - Coolant system About the machine: Pjdpfx Abjvbifgezegn For sale is a Universal Milling Machine Deckel FP2 repowered by FPS, in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop and an electric central lubrication system. For safety, it features two emergency stop switches (as of 2013). Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel under power on site. The machine is immediately available.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 by Heidenhain and Infinitely Variable Feed NEARLY NEW CONDITION Technical data: >> Year of manufacture: 1987 Machine No.: 2102-3536 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical quill and horizontal quill – SK40 Pgsdpfx Abou R D I Sezsn >> Drawbar system S20x2 >> Weight approx. 800 kg Equipment and accessories: >> 3-axis digital readout Heidenhain TNC113 >> Centralized electric lubrication >> Machine lamp >> Coolant system >> Operating manual, spare parts list About the machine: Offered is a Universal Milling Machine Deckel FP1, year 1987, in like-new original condition. The machine shows minimal backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. This modern FP1 model features infinitely variable feed in three axes and also rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain distance control, you can enter positions that the machine approaches automatically. The FP1 was located in a training workshop where it was only used occasionally. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this exceptional machine on site under power.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, F729 Universal Milling Machine Deckel FP1 with 3-axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very Good CONDITION Technical Data: >> Year of manufacture: 1992 Machine number: 2102-6289 >> Rigid angle table (newly planed) Podpfx Aeu T D Nrjbzogn >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100mm on spindle carrier >> Vertical quill and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered here is a universal milling machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all lead screws move smoothly. Even at maximum speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes, and also includes rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain path control, dimensions can be entered which the machine then automatically moves to. The FP1 was used in a training workshop, where it was used only occasionally. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout system makes operation easier and more precise. Take advantage of the opportunity to inspect and test this machine on site under power.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit carried out by FA Huttelmaier In very good condition Technical Data: >> Year of manufacture: 1985 Machine No.: 2102-2891 >> Rigid angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head transversely adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: Pedou Nvwvopfx Abzsgn >> 3-axis digital readout Heidenhain TNC111 >> Coolant system >> Operating manual, spare parts plan About the Machine: Offered is a Universal Milling Machine Deckel FP1, year of manufacture 1985, in very good condition. The FP1 received an overhaul at Huttelmaier in 2008. The machine has minimal backlash and all lead screws operate smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed is infinitely variable in all three axes, and rapid traverse is also available in these axes. A significant benefit is the active 3-axis digital readout system. With this Heidenhain distance control, you can enter dimensions, which the machine then approaches automatically. The FP1 was located in a training workshop, where it was only used occasionally. Oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test this prime example under power on site.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and stepless feed – very good condition – CE compliant Technical Data: • Year of manufacture: 1992, Machine No. 2102-6209 • Rigid angle table (newly planed) • Spindle speed: 40 - 2000 rpm • Stepless feed in 3 axes • Rapid traverse in 3 axes • Drive power: 1.5 / 1.9 kW • Spindle brake • Travel distances X/Y/Z: 300 / 160 / 340 mm • Vertical milling head can be shifted 100 mm on spindle carrier • Vertical and horizontal quill – SK40 • Drawbar system M16 Podpfx Aoxdi Ivebzjgn • Weight approx. 800 kg Accessories and Equipment: • 3-axis digital display Heidenhain TNC113 • Coolant system • Machine lamp • Operating manual, spare parts list About the Machine: For sale is a Deckel FP1 universal milling machine, CE compliant and in very good condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. A special feature is that the control cabinet is connected to the machine via a plug, which makes transport easier. On this newer FP1 model, the feed in all three axes is infinitely variable, and the machine also features rapid traverse on these axes. An important advantage is the active 3-axis digital display. With this Heidenhain distance controller, you can enter dimensions that the machine will move to automatically. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test this machine under power on site.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 repowered by FPS, Year of Manufacture 2010 with 3-axis Digital Readout Heidenhain ND 780, As New Condition! Technical Data: >> Machine No. 55249/08, Year 2010 >> Fixed Angle Table >> Spindle Speed: 40 - 2000 rpm >> Feed on 2 Axes >> Drive Power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical Quill SK40 and Horizontal Quill SK40 Podpexu Hbhefx Abzsgn >> Drawbar System S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis Digital Readout Heidenhain ND 780 >> Hydraulic Vice >> Collets >> Tool Holders >> Cutters >> Operating Manual >> Coolant System About the Machine: Offered is a Universal Milling Machine Deckel FP1 repowered by FPS, in as-new condition. The accessories include hydraulic vice with swivel base, collet tool holder, and cutters. Mechanically and electrically tested. The Heidenhain digital readout ensures easier and more precise operation. Take advantage of the opportunity to view and test the Deckel under power on site. The machine is available immediately.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout RSF 2006, Fully Refurbished, TOP Condition Technical Data: >> Machine No. 53819/08 >> Fixed Angle Table >> Spindle Speed: 40 - 2000 rpm >> Feed on 2 Axes >> Motor Power: 1 / 1.5 kW >> Travels X/Y/Z: 300/150/340 mm >> Vertical and Horizontal Quill - ISO 40 taper Pgsdpfx Abevb Ud Uozjn >> Spindle Brake >> Drawbar System S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant device >> Machine leveling feet About the Machine: Offered is a Deckel FP1 universal milling machine in very good condition. The Deckel has minimal backlash and all spindles move smoothly. An oil change has been performed. The FP1 was completely overhauled by Huttelmaier in 2006 and has seen very little use since. The RSF digital readout makes work easier and even more precise. Take the opportunity to inspect and test this machine onsite under power.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed – Excellent CONDITION Technical Data: >> Year of manufacture: 1984 Machine No. 2102-2601 >> Swivel-tilting rotary table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be shifted 100 mm on spindle carrier >> Vertical quill and horizontal quill – ISO 40 (SK40) >> Drawbar system S20x2 >> Weight approx. 800 kg Podpju Racrsfx Abzjgn Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1984, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed in all three axes is infinitely adjustable, and the machine is also equipped with rapid traverse on these axes. The active 3-axis digital readout is a significant advantage. With this Heidenhain path control, you can input dimensions to which the machine will automatically move. The FP1 was located in a training workshop where it was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. You are welcome to inspect and test this machine under power on site.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, Universal milling machine Deckel FP1 with 3-axis digital readout K&C (new) and infinitely variable feed on 3 axes – Excellent condition Technical Data: >> Year of manufacture: 1985 >> Machine no.: 2102-2867 >> Swiveling-tilting rotary table (newly ground) >> Spindle speeds: 40 – 2000 rpm Pedpfx Abjt Aarpjzsgn >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100 mm on spindle carrier >> Vertical quill and horizontal quill – SK40 taper >> Clamping system: M16 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout K+C, newly installed, with manufacturer’s warranty and operation manual. Display functions: set reference and zero points, enter coordinates, mm/inch switch, absolute or incremental mode, circle functions, hole patterns, radius milling functions, etc. >> Coolant device >> Operator’s manual, spare parts list About the machine: For sale is a Deckel FP1 universal milling machine, year 1985, in excellent condition. The machine has minimal backlash and all axes move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed is infinitely variable on all three axes, plus there is rapid traverse in all axes. Oil change has been performed. Mechanically and electrically inspected. The new digital readout by K&C makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our site.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Universal milling machine Deckel FP4M with 3-axis Heidenhain Active digital readout – Excellent condition, CE compliant! Technical Data: >> Year of manufacture: 1992, Machine No. 2203-8449 >> Rigid angle table >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travels (X/Y/Z): 500 / 400 / 400 mm >> Vertical milling head adjustable on spindle carrier >> Vertical and horizontal quill - SK40 taper >> Vertical quill extendable by 90 mm >> Hydraulic clamping system >> Weight approx. 1,600 kg Pedpfju Tuk Hsx Abzogn Accessories and Equipment: >> 3-axis active digital readout by Heidenhain >> Coolant system >> Chip tray >> Centralized electric lubrication >> Operation manual, spare parts diagrams About the machine: Offered here is a Deckel FP4M Active universal milling machine in excellent condition. The machine has minimal backlash and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs smoothly. The machine features hydraulic clamping. The FP4M has only been used occasionally in a governmental training facility. On this newer FP4 model, the feed rate is steplessly adjustable in all three axes, and there is rapid traverse available for each axis. A major advantage is the Heidenhain 3-axis active digital readout. With this Heidenhain position control, you can input dimensions which the machine then automatically moves to. An oil change has been performed; mechanically and electrically inspected. The Heidenhain digital readout system makes operation easier and even more precise. Take the opportunity to view and test this machine under power on site.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1978, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout K&C, Infinitely Variable Feed, in Light Grey – Excellent Condition Technical Data: >> Year of manufacture: 1978 Machine No.: 2101-0465 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle support by 100 mm >> Vertical and horizontal quill - ISO 40 taper >> Drawbar system S20x2 >> Weight approx. 700 kg Equipment and Accessories: >> 3-axis digital readout system (K&C), newly installed, with manufacturer's warranty and operating manual. The display unit features: reference points, zero point setting, coordinate input, mm/inch switching, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Coolant system About the Machine: Pgsdpfx Ast Aav Isbzen Offered is a universal milling machine Deckel FP1 in excellent condition. The machine has very little backlash and all the spindles move smoothly. All bellows are new. On this newer FP1 model, the feed is infinitely variable on two axes, and the machine is also equipped with rapid traverse. The oil has been changed. Mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP4MK with 3-axis 'Aktiv' Heidenhain digital readout in light grey, very good condition, CE compliant! Technical Data: >> Year of manufacture: 1992 Machine No.: 2203-8489 >> Fixed angular table >> Speed range: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW Pgedpfx Ajw Evq Asbzsn >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel (X/Y/Z): 500/400/400 mm >> Vertical milling head traversable on spindle support >> Vertical and horizontal quill - SK40 >> Vertical quill extendable by 90 mm >> Hydraulic clamping system >> Weight approx. 1600 kg Equipment and Accessories: >> 3-axis Heidenhain 'Aktiv' digital readout >> Coolant system >> Chip tray >> Electric central lubrication >> Operation manual, spare parts diagrams About the machine: Offered here is a Deckel FP4M 'Aktiv' universal milling machine in very good condition, CE compliant. The machine has minimal backlash and all feeds operate smoothly. Even at maximum spindle speeds, the milling machine operates quietly. The machine is equipped with hydraulic clamping. On this newer FP4 model, feed on all three axes is steplessly adjustable, and there is rapid traverse on each axis. A significant advantage is the active 3-axis digital readout. With this Heidenhain travel control, you can enter dimensions and the machine will automatically move to the set positions. An oil change has been carried out. The machine has been mechanically and electrically checked. The Heidenhain digital readout makes operation easier and more precise. Take advantage of the opportunity to inspect and test this machine under power at our site.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP3 with 3-Axis Digital Display RSF Elektronik Z-530!! Technical Data: >> Year of manufacture: approx. 1975, Machine No. 0681 >> Swiveling-tilting rotary table (completely overhauled) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable – SK-40 >> Drawbar system M16 >> Weight: approx. 1300 kg Accessories and Features: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system Pgsdsxu E I Hjpfx Abzjn >> Central lubrication About the Machine: A Universal Milling Machine Deckel FP3 is being offered in good condition. All spindles move smoothly. Most of the bellows are almost new. The swiveling-tilting rotary table is as new. Oil change has been carried out. Mechanically and electrically tested. The digital display makes work easier and more precise. You are welcome to inspect and test the Deckel on site under power. The machine is available immediately!!!