Įrankių frezos

DECKEL FP3 Aktiv

Sąlyga: geras (naudotas), Gamybos metai: 1981, Deckel FP3L Aktiv with 3-axis Heidenhain Aktiv digital readout, fixed table, vertical milling head, SK 40 spindle taper, S20x2 spindle mount. Good working and operational condition. Machine can be demonstrated under power by appointment. Dsdpfx Aowg S Nkef Hswc

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Active Heidenhain Digital Readout Complete Overhaul by FPS in 2015, Like-New Condition Dsdju Dm E Hopfx Af Hswc Technical Data: - Year of manufacture: 1980, Machine No. 2201-5045 - Fixed angle table - Spindle speed: 25 – 2500 rpm - Infinitely variable feed in 3 axes - Rapid traverse in 3 axes - Drive power: 2.0 / 4.0 kW - Spindle brake - Travel (X/Y/Z): 500/300/400 mm - Vertical milling head can be moved 200 mm along the column - Vertical and horizontal quill – SK40 extendable - Clamping system M16 - Weight: approx. 1500 kg Accessories and Equipment: - 3-Axis Active Digital Readout Heidenhain (latest version) - Coolant system - Central lubrication About the Machine: Offered is a Universal Milling Machine Deckel FP3 in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has only seen limited use since. The machine has minimal backlash and all spindle movements operate smoothly. On this later FP3 model, the feed is steplessly adjustable in all three axes, and each axis also features a rapid traverse. A significant advantage is the Active 3-Axis Digital Readout. With the Heidenhain path control, you can input measurements that the machine automatically approaches. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout significantly simplifies and boosts the precision of work. Take the opportunity to view and test the machine under power on site. The machine is available immediately.

Gamybos metai: 1982, Sąlyga: visiškai atnaujintas (naudotas), Universal tool milling machine Brand: DECKEL Dwedpfspn Rgvjx Af Hsc Model: FP 3 Aktiv Year of manufacture: 1982 - overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2201-5539 with warranty Geometric inspection with test protocol Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 650 x 370 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread M 16 - Central lubrication, manual operation - Coolant system - Operating manual Used, sold as seen The machine is technically in accordance with the standards as of the year of manufacture.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1989, Dear Sir or Madam, We are offering for sale a partially overhauled Deckel FP1 with a 3-axis TNC113 active control, which stands out for its particularly user-friendly operation. This newer version from the year 1989 features, among other things, central lubrication, an electric coolant pump, and a machine lamp. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition, which you are welcome to inspect on-site. As part of the partial overhaul, the following work, among others, was carried out: - Spindle bearings of the milling head replaced - Repainting - Various standard parts such as handles, oil sight glasses, buttons, etc. replaced Dwsdpfxspy Eldj Af Hec - Wear parts such as drive belts, etc. replaced - Some bellows replaced - Gib strips adjusted - and much more… Delivery time: immediately Year of manufacture: 1989 Machine no.: 2102-xxxx Table: fixed angle table Travel paths: X300mm / Y160mm / Z340mm Quill stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: stepless 5-500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: coolant system, central lubrication, manual, machine mounts Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can overhaul your chosen machine either completely or partially - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety devices - We are happy to take care of shipping and/or installation

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1978, Deckel FP3L Aktiv with 3-axis Heidenhain Aktiv digital readout, fixed table, vertical milling head, SK 40 spindle taper, S20x2 spindle mount. Fully operational condition. Machine can be demonstrated under power by prior arrangement. Dedoug T Dxopfx Af Hswc

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 LV Aktiv Year of manufacture: 1988 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2309-0146 Milling head type: 2271 Milling head no.: 700-0887 Warranty: 12 months, single-shift operation from delivery, covering the mechanics overhauled by us. The electrical and electronic components are excluded from the warranty, as they have only undergone a functional test. For machines located outside our North Bavarian sales area, travel expenses are to be borne by the customer. Geometric inspection with test protocol Accessories: Djdpfxotdnb Eo Af Hswc - 3-axis active digital display HEIDENHAIN TNC 113 - Fixed table 1,390 x 550 mm (T-slot: 16 mm) - Vertical milling head SK 40 with M 16 drawbar thread - Central lubrication, manually operated - Coolant system - Operating manual Used, as seen The technical condition of the machine corresponds to the standard of the year of manufacture.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 L Aktiv Year of manufacture: unknown – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2302-2319 Milling head type: 2271 Milling head no.: 700-0883 with warranty Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with Draw bolt thread S 20 x 2 - Central lubrication, electric Dsdpfxjh Rv U Ej Af Hjwc - Coolant system - Operating manual - Drill bit grinding device with diamond wheel - used, as seen -