Suoliukas gręžtuvas

MAXION UNIMAX 1 TAP

Sąlyga: naujas, Continuous drilling capacity in St 60: 15 mm Nominal drilling capacity: 18 mm Thread cutting capacity: M8 Spindle: MT 2 Drilling depth: 80 mm Throat depth: 180 mm Infinitely variable spindle speeds: 200 – 4,000 rpm Spindle speeds for thread cutting: 200 – 700 rpm Distance spindle/table: up to 380 mm Table surface: 250 x 220 mm Kedpfeb Eldnox Af Ijdg Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Frequency-controlled three-phase motor: 1.1 kW Equipped with a full-featured thread cutting device and programmable digital display Machine in stock and immediately available

Sąlyga: naujas, High-performance thread cutting machine with leadscrew and optimal safety device to prevent tool breakage. Program mode for single or continuous cycle operation. Electronically controlled motor braking in single cycle mode. Easy leadscrew change via quick coupling. Technical Data UNIMAX 3T GL: Thread cutting capacity: M 4 - M20 Threads per hour: 800 Standard drilling capacity: 28 mm Spindle: MT 3 Thread depth: 90 mm Drilling depth: 120 mm Throat depth: 260 mm Spindle/table distance: 220 - 600 mm Table surface: 420 x 390 mm T-slot width: 14 mm Column diameter: 110 mm Overall height: 1,300 mm Weight: 250 kg Special motor: 0.9 kW Power supply: 400 V / 50 Hz 9 spindle speeds: 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Kdodpsgv I Unefx Af Ijg Standard packaging: C - 160x75x125 cm Additional accessories/options: Leadscrew, tap holder, reverse gear disengagement, externally ventilated motor, die holder, flange quill, foot impulse switch, two-hand start, LED machine light, minimum quantity lubrication system, base cabinet.

Sąlyga: naujas, Bench drill Make: MAXION Model: UNIMAX 1 TAP Condition: New machine Spindle speed (stepless): 200 - 4,000 rpm Drilling capacity (steel): 18 mm Kjdpfxoci A S So Af Iodg Standard features: - Tapping device - Digital speed display - Digital drilling depth display - Table adjustment via rack and pinion - Operating manual

Sąlyga: naujas, MAXION Unimax 1 TAP Bench Drill with Integrated Tapping Device Very powerful, universal bench drilling machine with integrated tapping unit and programmable digital display. Electric drill guard and 230 V mains connection. Technical specifications: - Continuous drilling capacity in St 60: 15 mm - Normal drilling capacity: 18 mm - Thread cutting capacity: M8 - Spindle: MK2 - Drilling depth: 80 mm - Throat depth: 180 mm - Distance spindle/table: up to 380 mm - Table surface: 250 x 220 mm - Column diameter: 65 mm - Total height: 910 mm - Weight: 80 kg - Motor power: 1.1 kW - Infinitely variable spindle speeds: 200 - 4,000 rpm - Tapping speed: 200 - 700 rpm - Power supply: 230 V / 50 Hz Features: - Infinitely variable speed control Ksdpjgv I Uvjfx Af Iodg - Rack and pinion table adjustment with worm gear - Programmable thread depth - Digital display - Switch for clockwise / counterclockwise rotation - Ideal for locations without three-phase power supply See attached data sheet for details – please inquire for additional models.

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Active Heidenhain Digital Readout Complete Overhaul by FPS in 2015, Like-New Condition Technical Data: - Year of manufacture: 1980, Machine No. 2201-5045 - Fixed angle table - Spindle speed: 25 – 2500 rpm - Infinitely variable feed in 3 axes - Rapid traverse in 3 axes - Drive power: 2.0 / 4.0 kW - Spindle brake - Travel (X/Y/Z): 500/300/400 mm - Vertical milling head can be moved 200 mm along the column - Vertical and horizontal quill – SK40 extendable - Clamping system M16 - Weight: approx. 1500 kg Accessories and Equipment: - 3-Axis Active Digital Readout Heidenhain (latest version) - Coolant system Kdsdju Dm E Hspfx Af Isg - Central lubrication About the Machine: Offered is a Universal Milling Machine Deckel FP3 in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has only seen limited use since. The machine has minimal backlash and all spindle movements operate smoothly. On this later FP3 model, the feed is steplessly adjustable in all three axes, and each axis also features a rapid traverse. A significant advantage is the Active 3-Axis Digital Readout. With the Heidenhain path control, you can input measurements that the machine automatically approaches. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout significantly simplifies and boosts the precision of work. Take the opportunity to view and test the machine under power on site. The machine is available immediately.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Initial commissioning: 2014 Control system: Heidenhain iTNC 530 HSCI incl. HR 520 electronic handwheel Machine Hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Hours on current milling spindle: approx. 900 h Travel X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Drives for linear axes Feed rate X/Y/Z-axes: up to 60 m/min Axis acceleration X/Y/Z-axes: up to 5 m/s² Electrical connection data Connected load: 190 kVA Primary fuse: approx. 315 A Dimensions, weights Machine footprint with peripherals: approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Kdedpfswywcisx Af Ijg Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area cover - Chip conveyor - LTA emulsion mist extraction unit Optional at extra cost: - Renishaw RMP60 wireless touch probe - BLUM Control NT Condition of the machine Fully functional, in very good condition, and can still be inspected under power! Images shown are exemplary and are from a new machine of this type. Original images will be provided shortly!

Sąlyga: naudotas, Gamybos metai: 2012, x eiga 1600 mm y eiga 4000 mm Kedpfxoxcbhxo Af Iedg z eiga 1200 mm Ruošinio svoris 3500 kg

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Metalo liejykla – inventorius Pilnas smėlio liejyklos inventorius Venlo-Lomm mieste, Nyderlanduose Formavimo linija HWS, tipas SFM2 / 30 dėžių/val. Valdymas S/7 Piltuvo freza Branduolių šaudymo mašina Röper H6,5-H16, hidraulinė, valdymas S/7 Branduolio smėlio maišymo įrenginys, gamintojas Klein YXLON rentgeno įranga Spektrinė analizė Spectro Ideco analizatorius Formavimo mašinos Smėlio paruošimas Lydymo krosnys Juostinis šlifuoklis Pavojingų medžiagų konteineris Džiovinimo krosnis Juostinis pjūklas Šratavimo įrenginys Tilto kranas 32 t, krano bėgių matmenys: 5750 mm, pagaminta 2002 m. Nuoširdžiai kviečiame apžiūrėti liejyklą. Įrengimai ir daiktai parduodami naudoti. Kdsdjvz Aprepfx Af Ieg Pardavėjas jokių garantijų nesuteikia.

Sąlyga: geras (naudotas), Drilling capacity in steel (diameter): 25.0/30.0 mm Throat depth: 260 mm Quill travel: 120 mm Spindle speed range: 80–1400 rpm Table clamping area: 410 x 390 mm Total power requirement: 0.8/1.5 kW Kdodjuhhzhspfx Af Isg Machine weight: approx. 250 kg Space requirement: approx. 0.75 x 0.6 x 1.15 m

Sąlyga: naudotas, Column Drilling Machine ALZMETALL Type AB 4 SV Mach. No. 14805 Year of manufacture: approx. 1980 Drilling capacity: 40 mm Spindle taper: MK 4 - short quill Throat depth: 340 mm Quill stroke: 180 mm Table size: 710 x 560 mm Column diameter: 160 mm Spindle speed: 30 - 765 rpm, stepless Motor power: 2.3 and 3.4 kW, pole-switchable Power supply: 380 Volt, 50 Hz - Spindle speed adjustment via 2 motor speeds and stepless variator gearbox - Intermediate gear with 2 speed settings for high torque at low speeds Kodpfx Ajn N Ekcjf Isdg - Spindle On/Off via rotary switch or electric foot switch - Automatic feed: 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting unit Required space (L x W x H): 1200 x 725 x 2050 mm Weight: 615 kg Good condition