Frezavimo staklės - universalios

MAHO MH700C

Gamybos metai: 1982, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 75 810, Table clamping surface: 630 mm diameter Travel X: 600 mm Travel Y: 450 mm Travel Z: 500 mm Quill stroke: manual 80 mm Spindle taper: ISO 40 Spindle speeds: 20 - 3150 rpm Feeds, steplessly adjustable: 1 - 3000 mm/min Rapid traverse: 4 m/min Electrical connection: 380 V kW Space requirement: 2000 + 850 x 2000 x 2000 mm Pjdpjby Hhtofx Afwerd Weight: 3300 kg

Sąlyga: naudotas, Gamybos metai: 1975, Technical Details: Swing over bed: 500 mm Swing over cross slide: 260 mm Prodpov A Sqhjfx Afwjd Turning length: 950 mm Centre height measured in bed: 220 mm Distance between centres: 1000 mm Spindle speeds: 11.2 - 2240 rpm / 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 - 1.6 mm/rev – 32 steps Cross feeds: 0.02 - 0.71 mm/rev – 32 steps Total power requirement: 11 kW Machine weight approx.: n/a t Machine dimensions approx. LxWxH: 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle run), available free in Leipzig. Top slide rotatable 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for 2000 rpm. Thread cutting: metric, module, inch threads Chip protection wall Chuck guard (mechanical) MULTIFIX toolpost with boring bar holder Ø 40 mm Chip collection tray Coolant supply with pump Lead screw protection Machine feet CE safety pre-installed

Gamybos metai: 1986, Sąlyga: paruoštas naudoti (naudotas), Travel X/Y/Z: 700mm/500mm/450mm, table dimensions X/Y: 900mm/500mm, max. table load: 500kg, spindle taper: SK40, speed: 3150rpm, quill stroke: 100mm, feed rate: 3m/min, rapid traverse: 6m/min, machine dimensions X/Y/Z: approx. 3550mm/3150mm/2100mm, weight: approx. 3600kg. An on-site inspection is possible. Prsdpfx Ajwkihxefwed

Gamybos metai: 1983, Sąlyga: paruoštas naudoti (naudotas), Travel paths X/Y/Z: 700mm/500mm/450mm, table dimensions X/Y: 900mm/500mm, spindle taper: ISO40, spindle speed: 3150 rpm, feed rate: 3m/min, rapid traverse: 6m/min, spindle stroke: 100mm, machine dimensions X/Y/Z: approx. 3800mm/3600mm/2200mm, weight: approx. 3500kg, control: Philips CNC 432. An on-site inspection is possible. Prodpfx Afowpu Ibowod

Gamybos metai: 1985, Sąlyga: naudotas, Spindle diameter: 110 mm X-axis travel: 900 mm Y-axis travel: 600 mm Z-axis travel: 200 mm Table length: 1,020 mm Table width: 860 mm Taper: MK 40 Table size approx.: 1,020 x 860 mm Table load capacity approx.: 800 kg Max. longitudinal table travel (X): 900 mm Max. cross travel of drilling head (Y): 600 mm Max. quill travel (Z): 200 mm Max. vertical adjustment of cross beam (W): 635 mm Vertical clearance table/drilling spindle max.: 15 – 850 mm Distance between uprights: 950 mm Spindle diameter: 110 mm Internal/external spindle taper: ISO 40 18 spindle speeds: 10 – 2,500 rpm Continuously variable milling feed (table): 1 – 6,000 mm/min 4 milling feeds (drilling head): 30 – 180 mm/min 6 drilling feeds: 0.01 – 0.39 mm/rev Positional accuracy for all 3 axes (as new): 0.003 mm Rapid traverse table/drilling head/cross beam: 6,000 mm/min Spindle drive power: 6.2 kW Total drive power approx.: 15 kW – 380 V – 50 Hz Machine weight approx.: 9,000 kg Accessories / Special equipment: - 3-axis CNC control BOSCH MICRO 8 with monitor, program input manually, via cassette, and through interface - Digital display for Z-axis Psdpfx Ast Hwyxefwerd - Separate control cabinet, various tools - Oil cooler for spindle lubrication, etc.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, plunksnos brūkšnys: 190 mm, veleno greitis (min.): 41 aps./min, veleno greitis (maks.): 1 800 aps./min, bendras svoris: 1 920 kg, ruošinio svoris (maks.): 17 kg, plieno lakšto storis (maks.): 32 mm, sukimo momentas: 250 Nm, stalo aukštis: 900 mm, Used DONAU quick radial drilling machine type DR 32 - fully overhauled by vaumatec in 2022 - equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 leveling feet to relieve table frame load) Technical Data: Drilling capacity (solid): Steel 60/E335 mm Ø 32 (with feed rate 0.20 mm/rev): Cast iron 22 mm Ø 45 Tapping: Steel 60/E355 M26 Tapping: Cast iron 22 M35 Tool holder: MT4 Column diameter: mm Ø 195 Distance spindle nose to table: min./max. mm 260/660 Working table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds range I: rpm 41-1800 Feeds: mm/rev 0.1-0; 15-0; 20-0.3 Max. spindle torque: Nm 250 Arm mobility, radial: N 25 Prsdpfxsrn Riqe Afwod Arm mobility, axial: N 25 Clamping force, radial: Nm 3500 Clamping force, axial: N 5500 Feed force: N 7500 Max. allowable mass: kg 17 Max. allowable inertia: kgm 0.002176 Workpiece: Max. table load: kg 1000 Center of gravity: in the center of the working surface

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 2002, X ašies eiga: 400 mm, Y ašies eiga: 300 mm, Z ašies eigos atstumas: 220 mm, stalo plotis: 515 mm, stalo ilgis: 640 mm, Wire EDM machine Chmer EDM Model: CD 305G Pjdpfx Aoqgcimefwerd X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 220 mm Table size: 515 x 640 mm Year of manufacture: 2002 Operating hours: 16,333 Including documentation and parameters Dimensions: 245 x 200 x 203 cm (LxWxH)

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 0001210226, Model table size: 236 x 460 mm Working table size: 200 x 500 mm Longitudinal working area: 300 mm Transverse working area: 160 mm Spindle speeds: 1,900 – 15,000 rpm Milling ratio: 1 : 1 (105 x 165 mm) / 1 : 5 (44 x 80 mm) Space requirement: 800 x 900 x 1,250 mm Podpfx Afjbv S Eleword Weight: 340 kg

Sąlyga: geras (naudotas), Gamybos metai: 2009, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2009 Control system: Fanuc Series 31i-MODEL A5 Spindle speed: up to 24,000 rpm Travel X-axis: 500 mm Prjdpjxflr Hjfx Afwed Travel Y-axis: 400 mm Travel Z-axis: 330 mm Rapid traverse speed X, Y, Z: 54 m/min Tool magazine: 21 positions Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter at 150–12,000 rpm: 80 mm Max. tool diameter at 12,000–15,000 rpm: 60 mm Max. tool diameter at 15,000–20,000 rpm: 45 mm Max. tool diameter at 20,000–24,000 rpm: 40 mm Permissible table load: 300 kg SCOPE OF DELIVERY Includes (not exhaustive): - CNC Machining Center Fanuc Robodrill α-T21iFa - 4th and 5th axis rotary table - Coolant pump and chip tray - Complete scope of delivery as per photo documentation The Fanuc Robodrill α-T21iFa, year of manufacture 2009, is a versatile CNC machining center equipped with an integrated rotary table, adding a fourth and fifth axis. This extension enables demanding multi-axis machining and greatly increases production flexibility. With a spindle speed of up to 24,000 rpm and travels of 500 x 400 x 330 mm, this machine provides optimal conditions for precision milling with high productivity. The 21-position tool magazine minimizes setup times and enables rapid tool changes. Thanks to its robust construction, table load capacity of up to 300 kg, and the powerful Fanuc 31i control, this machine is ideally suited for both series production and complex individual parts. The integrated coolant unit also ensures process reliability and long tool life. No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Sąlyga: geras (naudotas), Tovaglieri parallel lathe Used, from an educational environment. Excellent condition. Centre height: 180 mm. Distance between centres: 700 mm. Spindle bore: 45 mm. Included accessories. No. 4 units available, subject to prior sale. Prjdpfx Askt U E Isfwsd