WEINIG padavimo ritinėlių tarpinių rinkinys

Sąlyga: naudotas, Gamybos metai: 2004, Kompaktiška pusiau automatinė dantytų jungčių linija, sudaryta iš: - Frezaus PJ 150/500 - Perdavimų stalo rankiniam perdavimui - Vieno kanalo preso PJ 7/6100 li Frezaus: 2 pakeliai/min Presas: 2 ciklai/min Įeinantis ilgis: 150–700 mm Galutinis ilgis: maks. 6 100 mm Hfjdpfxjw Nbaco Af Isb

Gamybos metai: 2004, Sąlyga: labai geros būklės (naudotas), Four-side planer - Maximum planing width: 23 cm - Maximum planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 overhead transfer rollers in front of the bottom head, plus a roller device for short elements Hfjdpfx Afjhlp D Ns Ijb - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left spindles, and a Tersa knife head on the top spindle.

Sąlyga: naujas, Technical data: Max saw blade diameter: 400 mm Min saw blade diameter: 250 mm Saw blade spindle diameter: 30 mm Scoring blade diameter: 120 mm Scoring blade spindle diameter: 20 mm Scoring unit with separate motor Manual saw blade height adjustment Hfjdpfx Afsv S Uz Is Ijb Tilting saw blade from 0° to 45° Manual saw blade angle adjustment Carriage length: 3200 mm Carriage lock Worktable: 1450 mm x 1030 mm Table height: 920 mm Table extensions: 2x Rip fence Guard Emergency stop switch Power supply: 380 V Main motor power: 7 kW Overall dimensions: Length: 3430 mm Width: 1900 mm Height: 1560 mm

Sąlyga: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition Hedpfx Aerigxysf Ijfb

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2004, WEINIG UNIMAT SUPER 4 Planer/Moulder – German-made – Very good condition – Year of manufacture: 2004 – Technical documentation (manual included) TECHNICAL SPECIFICATIONS: Planing width: 150 mm Planing height: 50 mm Spindle diameter: 40 mm Equipped with tooling Adjustable top spindle head 1) Bottom spindle: 11 kW, 6000 rpm 2) Top spindle: 18.5 kW, 7000 rpm 3) Lower spindle: 5.5 kW, 6000 rpm Feed motor: 2.2 kW Feed rate adjustable via inverter: 0–18 m/min Feed via cardan shafts Pneumatic pressure system Hjdpfx Afoin Nrgs Isfb Three top steel feed rollers One top rubber roller Ribbed infeed table Infeed table length: 1,950 mm Total power: 37 kW Central lubrication system Transport dimensions: Length/Width/Height: 320x220x220 cm Weight: approx. 2,700 kg

Sąlyga: naujas, Holzkraft minimax si 400es 32 Panel Saw 5504754 Heavy-duty professional version with scoring unit and anodized aluminum sliding table. Scoring unit equipped with its own motor and easily adjustable from the outside. Smooth and precise anodized aluminum sliding table with proven, maintenance-free ball contact system on hardened guides, 10-year warranty on guideway wear. Large outrigger table (longitudinally adjustable) with material roller on telescopic arm. Extendable telescopic crosscut fence with two folding stops. Precise parallel fence, folding for large panels, with quick-release and integrated fine adjustment. Supplied as standard with table extension, table widening, and eccentric clamp. Saw unit made from a robust cast iron ring with permanently precise dual pivot segment guide and zero-point tilt for smooth and accurate cuts, 6-year Holzkraft warranty on pivot segment wear. Large work table made from stress-relieved cast iron. High machine weight ensures precision and smooth operation. Equipped with a powerful three-phase motor. Version M: Electric height adjustment and tilting of the saw unit, digital tilt display. Version A: Start/stop switch on the sliding table. Version M A 3: Programmed control of saw blade height and tilt as well as parallel fence position, infinitely variable parallel fence positioning via switch or automatic positioning system, position display via encoder, adjustment via ball screw, possibility for incremental adjustment. Version UP: Swiveling control panel at eye level. Made in Italy TECHNICAL DATA: Dimensions and Weights Net weight approx. 715 kg Connection Extraction Extraction port diameter 120 mm Extraction port diameter blade guard 80 mm Setup Information Transport width 990 mm Machine body length 1900 mm Machine body width/depth 885 mm Required space length 7180 mm Required space width/depth 4860 mm Note: Required space dimensions allow for maximum travel paths or working lengths. Working area length 1600 mm Working area width/depth 2300 mm Note: Please add the working area dimensions to the required space for the recommended unobstructed installation area for the machine. Electrical Data Connection voltage 400 V Mains frequency 50 Hz Hfedpokkrm Rofx Af Isb Scoring motor power 0.55 kW Main drive motor power 7.0 kW Duty cycle main motor S6 Main motor duty cycle 40% Sliding Table and Work Table Sliding table length 3200 mm Sliding table width 360 mm Sliding table height 142 mm Table length 940 mm Table width 560 mm Table height 900 mm Panel Saw Unit Cutting width with parallel fence 1270 mm Max. crosscut width left of saw blade 3260 mm Rip capacity 3200 mm Saw blade tilt 90 – 45° Max. cutting height 90°: 136.5 mm Max. cutting height 45°: 97 mm Note: Max. cutting height is independent of scorer Saw blade diameter 400 mm Note: Saw blade diameter is independent of scorer Saw blade speed 4000 rpm Scoring Unit Scoring blade diameter 120 mm Scoring blade speed 9200 rpm Holzkraft Authorized Dealer – Accessories available on request!

Sąlyga: naudotas, Gamybos metai: 2017, Number of spindles: 5 units Working width: 240 mm Planing height: 120 mm Surfacing table length: 2500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Weight approx.: 3,500 kg Control: SCM Control 10 SCM Superset NT with workpiece return ----- Machine fully inspected. Summary: ----- - 5 spindles - Powerful motors - Left and top spindles controlled for width and height - With return system for workpieces to the operator 1st spindle ----- First lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system 3rd spindle ----- First left vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic horizontal positioning / motorised width adjustment 4th spindle ----- First top horizontal spindle Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic radial positioning / motorised height adjustment 5th spindle ----- Hedpfx Afswwl Nlj Iefb Second lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm SCM Control 10 user interface Including workpiece return system Including used planing heads currently installed. (Technical specifications according to manufacturer – subject to verification!)

Sąlyga: labai geros būklės (naudotas), Four-side planing machine Weinig Profimat 23 Fortec Hfodpfx Afoumxqrj Isb Working width: 230 mm Working height: 140 mm Number of spindles: 6 Spindle configuration: Bottom: 7.5 kW Right Left: 11 kW Top: 7.5 kW Top: 5.5 kW Bottom: 5.5 kW Pneumatic pressure rollers Feed speed adjustable via variator Drive via cardan shafts CE certificate

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, I am selling the semi-automatic finger jointing line LESSPOJ. Year of manufacture: 2022 Input lengths: 180-1,000 mm Wood width: 20-160 mm / 610 mm width in one pass Wood thickness: 20-80 mm Automatic finger jointing line with glue injection on one side Automatic turning of the material for the second pass on the reversing table Automatic feed into the press Press length 3.00 - 6.10 m with automatic cycle and end-cut saw. Hfsdpfx Aomig Tdjf Isb Total layout: 16,250 x 3,684 mm Sturdy, robust construction. Very good condition. Available immediately.

Gamybos metai: 2000, Sąlyga: geras (naudotas), Four-side planer Leadermac LMC 523 Smartmac - Year of manufacture: 2000 - Operating manual (DTR) - Electronic height and width adjustment - Option to save preset parameters TECHNICAL SPECIFICATIONS: - Planing width: 230 mm Hfsdpfoifftxox Af Ieb - Planing height: 140 mm - Spindle diameter: 40 mm 1st (bottom) spindle: 7.5 kW 2nd (right) spindle: 5.5 kW 3rd (left) spindle: 5.5 kW 4th (top) spindle: 7.5 kW 5th (bottom) spindle: 7.5 kW Feed speed steplessly adjustable Feed motor power: 3 kW Electronic height adjustment Electronic adjustment of the left spindle Feed via cardan shafts Five upper steel feed rollers Two upper rubber feed rollers One feed roller in the table Pneumatic material pressure Minimum workpiece length: 400 mm Infeed table length: 2000 mm Chromed tables Extraction nozzle diameter: 5 x 125 mm Machine dimensions: 370 x 200 x 190 cm Weight: approx. 3000 kg