Sienų linijos ištisinė sistema namo statybai

Gamybos metai

2011

Būklė

Naudotas

Vieta

Hilzingen

Sienų linijos ištisinė sistema namo statybai

Rodyti žemėlapį

Duomenys apie mašiną

Mašinos pavadinimas:: Sienų linijos ištisinė sistema namo statybai

Gamybos metai:: 2011

Būklė:: labai geros būklės (naudotas)

Kaina ir vieta

Vieta:: Gewerbestraße 12, 78247 Hilzingen, Deutschland

Skambinti

Pasiūlymo informacija

Skelbimo ID:: A17553733

Atnaujinimas:: paskutinį kartą atnaujinta 14.11.2025

aprašymas

This is a complete plant for house construction. Prices for each item are listed individually.

Comprising the following elements (see attached document):
Images will follow and are already included in the attached document.

Table 1 (Positioning and clamping the stud frame) €34,500
• Adjustable longitudinal conveyor with 3 hinged belt conveyors and sheathing
• Pneumatic cross-clamping
• Connections for compressed air and electricity

Table 2 (Placing and fastening the first sheathing layer) €25,300
• Longitudinal conveyor with 3 hinged belt conveyors and sheathing
• Pneumatic cross-clamping
• Connections for compressed air and electricity

Intermediate conveyor, 3 m length (parking bay for multifunction bridge) €4,600
• Longitudinal conveyor with 3 hinged belt conveyors

Hedpfx Aju D Amgef Djff
Table 3 (Placing the second sheathing layer, fastening, and flipping the element onto the next table) €35,650
• Longitudinal conveyor with 3 hinged belt conveyors and sheathing
• Pneumatic cross-clamping
• Connections for compressed air and electricity
• Hydraulic turning device

Table 4 (Installation of electrical systems and insulation) €34,500
• Cross transfer with rollers and sheathing
• Table cross-travel function
• Connections for compressed air and electricity
• Hydraulic turning device

Table 5 (Placing the first sheathing layer and fastening the second side) €32,775
• Longitudinal conveyor with 3 hinged belt conveyors
• Cross transfer with rollers
• Pneumatic cross-clamping
• Connections for compressed air and electricity

Intermediate conveyor, 3 m length (parking bay for multifunction bridge) €4,600
• Longitudinal conveyor with 3 hinged belt conveyors

Table 6 (Placing and fastening the second sheathing layer) €28,750
• Longitudinal conveyor with 3 hinged belt conveyors
• Pneumatic cross-clamping
• Connections for compressed air and electricity

Table 7 (Erection and distribution table) €29,900
• Longitudinal conveyor with 3 hinged belt conveyors
• Hydraulic tilting unit
• Table cross-travel unit
• Overhead guide for holding the walls vertically

Manual surface gantry with vacuum lifter on Table 2 (placing the first sheathing layer) €13,800
• Load capacity 85 kg with Schmalz vacuum unit
• Steel base frame with low-friction rails
• Travel range 12 x 5 m

Manual surface gantry with vacuum lifter on Table 3 (placing the second sheathing layer) €13,800
• Load capacity 85 kg with Schmalz vacuum unit
• Steel base frame with low-friction rails
• Travel range 12 x 5 m

Manual surface gantry with vacuum lifter on Table 5 (placing the first sheathing layer on the second side) €13,800
• Load capacity 85 kg with Schmalz vacuum unit
• Steel base frame with low-friction rails
• Travel range 12 x 5 m

Manual surface gantry with vacuum lifter on Table 6 (placing the second sheathing layer on the second side) €13,800
• Load capacity 85 kg with Schmalz vacuum unit
• Steel base frame with low-friction rails
• Travel range 12 x 5 m

Wall storage 1: 12 m long, 24 bays €11,500
Wall storage 2: 12 m long, 20 bays

Vacuum lifter with column-mounted slewing crane €9,200

1 traverse, 2 t Abus €20,125
1 traverse, 2 t

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.

Dokumentai

17553733-01.pdf

Tiekėjas

Registruotas nuo: 2002

42 Skelbimai internetu

Skambinti

Siųsti užklausą

Telefonas & Faksas

+49 7733 ... skelbimai

Šie skelbimai taip pat gali jus sudominti.

Aukcionas

Lazerio pjovimo staklės TRUMPF Trumatic L 3050

Baden-Württemberg

1 240 km

Lazerio pjovimo staklės
TRUMPFTrumatic L 3050

3 000 €

Aukcione

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2006, veikimo valandos: 24 314 h, mašinos/transporto priemonės numeris: A0230A1231, lazerio galia: 6 000 W, maks. lakšto storis: 25 mm, X ašies eiga: 3 000 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 100 mm, No minimum price – guaranteed sale to the highest bidder! Bidding requires timely collection of the machine by 30.04.2026! Increased need for sale – therefore shortened runtime and reduced minimum price! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 100 mm Hfodoyynu Nspfx Af Dsf Laser power: 6,000 W Laser unit: CO2 laser TLF 5000, high-frequency excited Maximum workpiece weight: 900 kg Positioning speed (X/Y): 200 m/min Positioning speed simultaneous (X+Y): 300 m/min Maximum sheet thickness steel: 25 mm Maximum sheet thickness stainless steel: 25 mm Sheet thickness aluminium: 15 mm MACHINE DETAILS Power-on hours: 55,176 h Cutting hours: 24,314 h Control model: Siemens Sinumerik 840D Control equipment: Open PC-based control system Online help Diagnostic functions Maintenance logbook Technology data Remote maintenance Safety equipment: Multi-beam light curtains and protective enclosure Fully enclosed beam guidance with nitrogen purging Monitoring system Multi-chamber extraction and compact dust collector Paintwork: white RAL 9002 / gentian blue RAL 5010 Drives: Gantry drive combined with linear direct drives OTHER EQUIPMENT Cooling unit Logbook function Automatic pallet changer Laser power control HI-LAS high-pressure cutting PMS plasma sensor technology Programmable power cycles Programmable cutting gas pressure control Laser cutting head with 5" lens and 7.5" lens Quick-change system for cutting heads Automatic sheet edge detection APC capacitive height control and process monitoring PCS (Process Control System) Laser diode positioning Automatic focus adjustment (AutoLas Plus) Spray device for safe thick-sheet processing Automatic shutdown Work area illumination Encapsulated machine frame with integrated laser unit

Peržiūrėti detales

Mažas skelbimas

Stacionarus betono siurblys Putzmeister P13 EMR KA230

Vokietija

999 km

Stacionarus betono siurblys
PutzmeisterP13 EMR KA230

Skambinti

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2012, Siūloma stacionari Putzmeister betono pompa priekabos konstrukcijoje. Variklio galia: 7,5 kW, maks. pumpavimo slėgis: 40 bar, našumas: 30–90 l/min, didž. grūdo dydis: 8 mm, stūmoklio eiga: 130 mm, stūmoklio skersmuo: 100 mm, maišytuvo talpa: 170 l, padavimo bunkerio talpa: 200 l, užpildymo aukštis: 1300 mm. Įrenginio matmenys (ilgis/plotis/aukštis): apie 3650/1600/1600 mm, svoris: apie 1200 kg. Yra dokumentacija. Galima apžiūra vietoje. Hjdpfxsycigdj Af Djff

Peržiūrėti detales

Aukcionas

Lazerio pjovimo staklės TRUMPF TruLaser 5060

Baden-Württemberg

1 240 km

Lazerio pjovimo staklės
TRUMPFTruLaser 5060

10 000 €

Aukcione

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2008, veikimo valandos: 42 130 h, mašinos/transporto priemonės numeris: A0270 A2021, lazerio galia: 6 000 W, plieno lakšto storis (maks.): 25 mm, aliuminio lakšto storis (maks.): 15 mm, X ašies eiga: 6 000 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 115 mm, Placing a bid obligates the buyer to collect the machine on time by 30.04.2026! Increased pressure to sell – thus shorter sale duration and reduced minimum price! TECHNICAL DETAILS Travel range X-axis: 6,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 115 mm Workpiece weight: 2,800 kg Speed parallel/simultaneous: 200 / 300 m/min Accuracy Smallest increment: 0.001 mm Positioning deviation: ± 0.1 mm Position repeatability: ± 0.03 mm Laser Model: TruFlow 6000 Power: 300 – 6,000 W Wavelength: 10.6 µm Beam mode: TEM01 Pulse frequency: 0.01 – 10 kHz Gases: CO2 / N2 / He Sheet thickness mild steel: 25 mm Sheet thickness stainless steel: 30 mm Sheet thickness aluminium: 15 mm MACHINE DETAILS Control unit: Siemens Sinumerik 840 D Dimensions & Weight Dimensions (L x W x H): 16.95 x 5.55 x 2.55 m Weight: 16 t Power consumption: 43 – 89 kW Hsdpfjyynuiex Af Dsff Connected load: 109 kVA Operating hours Beam-on time: 21,660 h Laser-on time: 42,130 h Compressed air connection: 7 – 10 bar Nitrogen connection: 30 bar Oxygen connection: 20 bar EQUIPMENT Cooling unit, logbook function Automatic pallet changer Gantry drive combined with linear direct drives Laser power control HI-LAS high-pressure cutting PMS plasma sensor system Programmable power cycles Programmable cutting gas pressure regulation Laser cutting head with 5" lens and 7.5" lens Quick-change system for cutting heads Automatic sheet edge detection APC capacitive height control and process monitoring PCS (process control system) Laser diode positioning Automatic focus adjustment (AutoLas Plus) Spray unit for safe processing of thick sheets Automatic switch-off Work area lighting Open, PC-based control system Online assistance Diagnostic functions Maintenance logbook Technology data Remote maintenance Safety Multi-beam light barriers Fully enclosed beam guide with nitrogen purging Monitoring system Multi-chamber extraction and compact dust collector Protective enclosure Machine system software

Peržiūrėti detales

Aukcionas

CNC tekinimo staklės GILDEMEISTER NEF CT 40

Nordrhein-Westfalen

1 103 km

CNC tekinimo staklės
GILDEMEISTERNEF CT 40

4 300 €

Aukcione

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 08500, sukimosi skersmuo virš skersinio stumduko: 225 mm, tekėjimo ilgis: 1 000 mm, tekėjimo skersmuo: 400 mm, veleno greitis (maks.): 4 000 aps./min, valdiklio modelis: EPL 2, TECHNICAL DETAILS Max. turning diameter: 400 mm Turning length: 1,000 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 225 mm Travel X-axis: 260 mm Travel Z-axis: 1,040 mm Main spindle Speed range: 20 - 4,000 rpm Drive power: 11 kW Max. torque: 75 Nm Spindle bore: 72 mm Chuck diameter: 185 mm Spindle nose: 140H5 Spindle bearing diameter (front): 100 mm Tool turret Number of tool stations: 12 positions Tailstock Quill diameter: 80 mm Quill stroke: 100 mm Tailstock taper: MT 4 Max. quill pressure: 8,000 N Feeds Rapid traverse (X-/Z-axis): 10 m/min Feed rate (X-/Z-axis): 5 m/min Feed force (X-axis): 5,000 N Feed force (Z-axis): 8,000 N MACHINE DETAILS Control model: EPL 2 Operating voltage: 380 V Frequency: 50 Hz Operating current: 76 A Total power requirement: 29 kW Dimensions & Weight Space requirement approx.: 4.6 x 2.1 x 2.0 m Machine weight approx.: 4.0 t Hfedpfjyxm Tnjx Af Def EQUIPMENT Chip conveyor Three-jaw chuck Documentation

Peržiūrėti detales

Mažas skelbimas

Wöllstadt

1 152 km

šoninis krautuvas
JumboJDQ 60/12/52

Skambinti

Aukcionas

Horizontalus apdirbimo centras MORI SEIKI SH 400

Nordrhein-Westfalen

1 103 km

Horizontalus apdirbimo centras
MORI SEIKISH 400

5 000 €

Aukcione

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 669, X ašies eiga: 560 mm, Y ašies eiga: 510 mm, Z ašies eigos atstumas: 510 mm, valdiklio modelis: MSC 502, sukimosi greitis (maks.): 12 000 aps./min, TECHNICAL DETAILS Travel X-Axis: 560 mm Travel Y-Axis: 510 mm Travel Z-Axis: 510 mm Distance spindle center to table: 50 - 650 mm Distance spindle nose to table center: 100 - 610 mm Main Spindle Maximum speed: 12,000 rpm Drive power: 22 / 18.5 kW Tool holder: MAS BT-40 Spindle bearing diameter: 70 mm Pallet Changer Number of pallets: 2 Pallet size: 400 x 400 mm Maximum workpiece diameter: 580 mm Maximum workpiece height: 650 mm B-Axis Indexing time 90°: 2.5 sec Pallet change time: 6.0 sec Tool Changer Number of tool stations: 60 pos. Maximum tool diameter: 80 mm Maximum tool diameter with free adjacent pocket: 125 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Tool-to-tool change time: 1.5 sec Chip-to-chip change time: 3.7 sec Rapid traverse (X/Y/Z): 32 m/min Feed rate: 1 - 24,000 mm/min Fine feed rate: 0 - 1,260 mm/min MACHINE DETAILS Control system: MSC 502 Total power requirement: 63 kVA Dimensions & Weight Space requirement approx.: 5.5 x 4.5 x 2.7 m Machine weight approx.: 9.0 t EQUIPMENT Documentation Chip conveyor Cooling unit High-pressure cooling Internal coolant supply Hjdpfx Ajyxm Irof Djff Tool magazine: 60 pos. Pallet changer Pallets: 2 Signal lamp B-axis Hydraulic unit Spindle oil cooler Note: The shaft for loading must be provided by the buyer.

Peržiūrėti detales

Aukcionas

CNC tekinimo ir frezavimo centras OKUMA MacTurn 50

Nordrhein-Westfalen

1 103 km

CNC tekinimo ir frezavimo centras
OKUMAMacTurn 50

11 500 €

Aukcione

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2000, veikimo valandos: 21 269 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0082, tekėjimo ilgis: 1 500 mm, tekėjimo skersmuo: 580 mm, X ašies eiga: 598 mm, Y ašies eiga: 230 mm, Z ašies eigos atstumas: 1 660 mm, TECHNICAL DETAILS Travel path X-axis: 598 mm Travel path Y-axis: 230 mm Travel path Z-axis: 1,660 mm Maximum turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Main spindle Main spindle speed range: 12 – 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Drive power – main spindle: 37 (30) kW C-axis accuracy: 0.001° Rapid traverse X/Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Hfedpfx Ajyxmyujf Dof Rapid traverse C: 100 rpm Cutting feed rate: 0.001 – 1,000 mm/rev Tool turret Type: H2 ATC Number of tool stations: 2 (1x L-tool / 1x M-tool) positions Driven stations: stepless Speed range – driven tool stations: 40 – 3,000 rpm Tool shank height: 25 mm Boring bar shank diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool magazine Number of tool stations: 50 positions Tool holder: MAS BT 50 Maximum tool diameter: 170 mm Maximum tool length: 350 mm Maximum tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Total connected load: 53 kVA Dimensions & Weight Space requirement: 6.0 x 3.2 x 3.0 m Machine weight: 18.5 t Operating hours Main switch on-hours: 79,607 h NC operating hours: 27,814 h Main spindle hours: 21,269 h EQUIPMENT Chip conveyor Central coolant unit High-pressure cooling 20 bar Tailstock Signal lamp C-axis Y-axis Hydraulic unit Steady rest Various tool holders (44 pcs) Three-jaw chuck Schunk – ROTA NC 400-120 Electronic handwheel

Peržiūrėti detales

Mažas skelbimas

Kryžminio pjovimo pjūklas po stalu SALVAMAC Legend 500

Oberkochen

1 179 km

Kryžminio pjovimo pjūklas po stalu
SALVAMACLegend 500

Skambinti

Būklė: naudotas, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table crosscut saw ----- Maximum cutting range: 220x125 / 260x100 / 285x80 / 310x50 mm. When cutting stacked boards, max. height: 100 mm. The frame is entirely constructed from thick-walled, reinforced, fully painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Two-hand safety cutting control positioned ergonomically. Saw motor power: 5.5 kW. Adjustable cutting speed via pneumatic regulator. Hedjv Uq Tlopfx Af Doff Maximum system for weight balance and durability. Shock-absorbing system. Independent pneumatic adjustments for adaptation to different processing types. Durable and easily replaceable saw blade guide bar. TCT circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece hold-down with electro-pneumatic control. Pressing system operates via innovative ball bearings with dual dust protection and automatic lubrication system. CE-compliant electrical system. CE-certified models must be equipped as standard with infeed and outfeed support tables/roller conveyors of at least 1 meter in length. Technical Specifications: ----- Maximum cutting cross section, mm: 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: TCT Z=108 Saw blade speed: 2800 rpm Air consumption per cycle: 5 Nl Extraction connections: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400 V / 50 Hz, 3-phase Working table height: 900 mm ± 20 mm Color tone: RAL 7035 Machine additionally equipped with: ----- 2 m roller conveyor (right of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity: 230 kg, diameter: 60 mm, spacing: 250 mm, width: 320 mm. Area between rollers enclosed with painted steel. Including side guide. 2 m roller conveyor (left of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity: 230 kg, diameter: 60 mm, spacing: 250 mm, width: 320 mm. Area between rollers enclosed with painted steel. Including side guide, stop guide, and millimeter scale. 2 robust pneumatic stops, width 200 mm ----- Total price ex works: on request! ----- Pictures and video not original; show an identical model. Additional options (e.g., longer infeed/outfeed tables, stop systems) available on request! (Technical data according to manufacturer's information—subject to change!)

Peržiūrėti detales

Aukcionas

CNC tekinimo staklės GILDEMEISTER CTX 500

Nordrhein-Westfalen

1 103 km

CNC tekinimo staklės
GILDEMEISTERCTX 500

5 500 €

Aukcione

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 315357, sukimosi skersmuo virš skersinio stumduko: 420 mm, tekėjimo ilgis: 1 000 mm, tekėjimo skersmuo: 600 mm, veleno greitis (maks.): 3 200 aps./min, valdiklio modelis: Eltropilot Heidenhain, TECHNICAL DETAILS Turning length: 1,000 mm Swing diameter over bed cover: 600 mm Swing diameter over flat guide: 420 mm Travel distance X-axis: 275 mm Travel distance Z-axis: 1,065 mm Main spindle Speed range: 16 - 3,200 rpm Drive power: 27 kW Max. torque: 800 Nm Spindle diameter at front bearing: 120 mm Spindle bore: 85 mm Chuck diameter: 260 mm Spindle nose: 220H5 Tool turret Number of tool stations: 12 Tool shank diameter: 40 mm Turret indexing time: 0.8 s Tailstock Quill diameter: 100 mm Quill stroke: 120 mm Tailstock taper: MK 5 Max. quill pressure: 9,500 N Feeds Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 15 m/min Feed force X-direction: 5,000 N Feed force Z-direction: 1,000 N MACHINE DETAILS Control unit model: Eltropilot Heidenhain Operating voltage: 400 V Frequency: 50 Hz Operating current: 76 A Hjdpfx Afoyxmurj Djff Total power requirement: 52 kVA Dimensions & Weight Space requirement: approx. 5.5 x 2.5 x 2.1 m Machine weight: approx. 7.5 t EQUIPMENT Documentation Chip conveyor Coolant system Tailstock Hydraulic unit Three-jaw chuck (model: SMW KNCS-N-260-72) Note: An RMS sensor is installed in the machine!

Peržiūrėti detales

Aukcionas

Nordrhein-Westfalen

1 103 km

Daugiaašė mašina
SCHÜTTESG 18

16 000 €

Aukcione

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, veleno greitis (maks.): 8 000 aps./min, tekėjimo skersmuo: 18 mm, valdiklių gamintojas: Siemens, Įranga: drožlių transporteris, strypų padavėjas, TECHNINĖS DETALĖS Sukimosi skersmuo: 18 mm (16 mm) Veleno apsisukimų dažnis: 800 - 8.000 aps./min Veleno skritulio skersmuo: 180 mm Pagrindinio veleno pavaros galia: 11 kW Sukimo momentas: 18 Nm Strypų padavimas: maks. 80 mm Išilginis slidinėjimo eiga: 50 mm (63 mm) Skersinio slidinėjimo eiga: 20 mm (32 mm) ĮRENGINIO DETALĖS Valdymas: Siemens Hfsdpfx Aeyxmrqef Dof Matmenys ir svoris Užimamas plotas apytiksliai: 6,0 x 1,5 x 2,2 m Įrenginio svoris apytiksliai: 5,5 t ĮRANGA CO2 gesinimo įrenginys Kraft&Bauer Ruez grandininis transporteris IEMCA strypų padavėjas PRA 52 42 F Įrankių rinkinys Kreivių rinkinys Įvairūs spaustuvai Dokumentacija Skiedrų transporteris Aušinimo skysčio sistema Detalių išleidimo sistema Signalinė lempa Sąsaja strypų padavėjui Hidraulinis blokas

Peržiūrėti detales

Mažas skelbimas

Nersingen

1 204 km

KVH ir BSH gamybos mechanizavimas
HIT

Skambinti

Gamybos metai: 2005, būklė: naudotas, HIT mechanisation for KVH and BSH production for components up to width 600 mm, height 300 mm, length 18 m consisting of various parts available individually or as a complete package Hodpfepiurmjx Af Dsff - Layer cross pusher - Various cross conveyors - Workpiece roller conveyors - Heavy-duty roller conveyors - 5 lifting tables each mounted with 2 cross conveyors on transfer trolleys - Stacking machine - Control cabinets - Roller tracks - Travelling timber crosscut saw with waste disposal

Peržiūrėti detales

Aukcionas

Vertikalus apdirbimo centras MAZAK Variaxis 200

Nordrhein-Westfalen

1 103 km

Vertikalus apdirbimo centras
MAZAKVariaxis 200

12 500 €

Aukcione

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 510 mm, Y ašies eiga: 510 mm, Z ašies eigos atstumas: 460 mm, valdiklio modelis: Mazatrol Fusion 640M, veleno greitis (maks.): 12 000 aps./min, TECHNICAL DETAILS Travel X-axis: 510 mm Travel Y-axis: 510 mm Travel Z-axis: 460 mm Swivel range A-axis: +30° / -120° Rotation range C-axis: +/- 360° Feed rate range (X-/ Y-/ Z-axis): 1 - 50,000 mm/min Rapid traverse (X-/ Y-/ Z-axis): 50 m/min Indexing A and C: 0.001° Switchover time 90° A/C: 1.9 / 1.5 s Main spindle Max. spindle speed: 12,000 rpm Main spindle drive power: 22/15 kW Tool holder: ISO 40 Spindle diameter: 80 mm Acceleration time to max. speed: 1.7 s Worktable Clamping area: 500 x 400 mm Number of T-slots: 5 T-slot width: 18 mm T-slot spacing: 80 mm Spindle-to-table distance: 190 - 650 mm Max. workpiece size: 500 x 500 x 405 mm Max. table load: 300 kg Tool changer Max. number of tool stations: 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent station: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool change time: 4.5 s MACHINE DETAILS CNC control: Mazatrol Fusion 640M Hsdpfx Ajyxmq Tof Dsff Total power requirement: 51 kVA Dimensions & Weight Space requirements: 3.4 x 3.7 x 2.8 m Machine weight: 7.5 t EQUIPMENT Hydraulic unit Coolant system Chip pan Tool measurement Documentation

Peržiūrėti detales

Aukcionas

CNC tekinimo ir frezavimo centras SPINNER TD 42 Triplex

Nordrhein-Westfalen

1 103 km

CNC tekinimo ir frezavimo centras
SPINNERTD 42 Triplex

18 000 €

Aukcione

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, veleno greitis (maks.): 7 000 aps./min, veleno skylė: 42 mm, valdiklio modelis: Siemens 840 D - SL, priešpriešinio veleno didžiausias greitis: 7 000 aps./min, Įranga: drožlių transporteris, TECHNICAL DETAILS Bar diameter: 42 mm Travel X-axis 1/2/3: 180 mm Travel Y-axis 1/3: ±45 mm Travel Z-axis 1/2/3: 704 / 620 / 704 mm Main spindle Speed: 7,000 rpm Drive power: 22 kW / 16.5 kW Torque at spindle: 128 Nm / 100 Nm Spindle bore: 42 mm C-axis: 0.001° Spindle nose: 110 mm Sub spindle Speed: 7,000 rpm Drive power: 19 kW / 16.5 kW Torque at spindle: 128 Nm / 100 Nm Spindle bore: 42 mm C-axis: 0.001° Spindle nose: 110 mm Tool turret Number of turrets: 2 + 1 pos Number of tool stations: 3x 12 pos Number of driven tool stations: 3x 12 pos Driven tool speed: 8,000 rpm Power: 11.4 kW / 2.3 kW Torque: 26 Nm / 14 Nm Tool holder: VDI 25 Rapid traverse (X / Y / Z): 30 m/min Acceleration: 0.5 g MACHINE DETAILS Control: Siemens 840 D - SL Total power requirement: 60 kW Dimensions & Weight Footprint: approx. 8.2 x 3.3 x 2.5 m Machine weight: approx. 7.5 t EQUIPMENT Documentation Chip conveyor Knoll High-pressure coolant (14 bar) Parts catcher Sub spindle Interface for bar feeder Bar loading magazine Spinner Barload BL 0146 C-axis: 2x 0.001° Hydraulic unit Hainbuch collet chuck Y-axis: 2x ±45 mm Various tool holders Various collets Hjdsyxmnxepfx Af Deff Tool setting arm

Peržiūrėti detales

Mažas skelbimas

CNC lizdavimo staklės su pakrovimu ir iškrovimu Nanxing NCG3021L

Rumunija

1 030 km

CNC lizdavimo staklės su pakrovimu ir iškrovimu
NanxingNCG3021L

Skambinti

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Nanxing NCG3021L(LL) este un centru de prelucrare CNC nesting de înaltă performanță, proiectat pentru tăiere, găurire, frezare și etichetare a pieselor într-un flux de lucru complet automatizat. Acest model integrează sisteme automate de încărcare, descărcare și etichetare, combinând automatizarea, inteligența și producția bazată pe IT. Portul deschis permite conectarea cu software de proiectare mobilier și ERP, asigurând o prelucrare a panourilor complet optimizată. Software-ul profesional de optimizare FCC crește eficiența tăierii, reduce risipa și susține managementul integrat al producției. Această utilaj este soluția ideală pentru fabricarea inteligentă a mobilierului, reducând costurile de manoperă fără a compromite acuratețea sau productivitatea. Caracteristici principale - Sistem automat de încărcare și descărcare cu masă de ridicare 3 tone, dispozitiv de pre-push și perdele de siguranță - Sistem rotativ de etichetare cu imprimantă Honeywell – etichetarea și prelucrarea se realizează simultan - Masă de vacuum (3100×2150 mm), împărțită în 10 secțiuni pentru o priză vacuum uniformă și puternică - Două pompe de vacuum de 7.5 kW fiecare (cu ulei), pentru aspirație maximă și nivel de zgomot redus - Rigiditate ridicată a portalului – asigură precizia și stabilitatea pe termen lung chiar și la viteze mari - Electromandrină principală italiană 12 kW (HSK-63F, ATC, 24.000 rpm) cu suflare de aer internă și externă pentru evacuarea perfectă a prafului - Schimbător automat de scule (ATC) cu 12 poziții – optimizează timpul și permite operații complexe - Cap de găurire cu 21 de axe pentru găurire verticală și orizontală Hfjdpfsxcwnbox Af Def - Sistem automat de ungere pentru întreținere redusă și durată de viață extinsă - Sistem de aspirare praf cu puncte de extracție față și spate pentru un mediu de lucru mai curat - Design orientat spre siguranță: gard de protecție complet și barieră optică (opțional) - Sistem de control SYNTEC CNC, interfață intuitivă, compatibil cu fișiere MPR, DXF, TCN, NC Specificații tehnice - Zonă de lucru: X: 3100 mm / Y: 2150 mm / Z: 50 mm - Înălțimea mesei de lucru: 1010 mm - Viteză max. de deplasare: X/Y 70 m/min, Z 20 m/min - Electromandrină principală: 12 kW, HSK-63F, 24.000 rpm - Schimbător de scule: ATC cu 12 poziții, servocontrolat - Cap de găurire: 21 axuri verticale, 2,5 kW, 4000 rpm, max. diametru găurire Ø 35 mm - Capacitate pompe vacuum: 2×7.5 kW, 250 m³/h - Putere totală instalată: 47 kW - Dimensiuni utilaj: 13.800 × 3.950 × 2.600 mm - Greutate: 6.000 kg - Alimentare: 380V / 50Hz / 3 faze Aplicații - Producție mobilă din panouri (bucătării, dressing-uri, mobilier birou) - Tăiere și găurire nesting pentru MDF, PAL, placaj - Linii automate cu etichetare pentru fabrici inteligente Industry 4.0 Avantaje - Soluție completă: încărcare, nesting, găurire, frezare, etichetare și descărcare – toate automatizate - Eficiență ridicată: optimizare software + sincronizare duală portal pentru dublarea vitezei de procesare - Reducere forță de muncă: operator minim necesar - Ideal pentru producția de serie: calitate stabilă, precisă și constantă.

Peržiūrėti detales

Aukcionas

CNC tekinimo staklės HWACHEON Cutex 160 B

Nordrhein-Westfalen

1 103 km

CNC tekinimo staklės
HWACHEONCutex 160 B

11 000 €

Aukcione

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2013, veikimo valandos: 7 546 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 284 mm, tekėjimo skersmuo: 300 mm, veleno skylė: 62 mm, veleno greitis (maks.): 4 500 aps./min, valdiklio modelis: Fanuc Oi-TD, TECHNICAL DETAILS Max. turning diameter: 300 mm Max. turning length: 284 mm Swing diameter over bed: 550 mm Chuck diameter: 210 mm Bar capacity: 51 mm Spindle nose: A2-6 Max. main spindle speed: 4,500 rpm Spindle bore: 62 mm Spindle bearing diameter: 100 mm Main spindle drive power: 11 / 7.5 kW Travel - X-axis: 170 mm Travel - Z-axis: 335 mm Number of tool stations: 12 pos. Tool size: Ø25 x Ø40 mm Rapid traverse (X / Z): 36 / 36 m/min Hjdpfx Afjyxmmue Doff Tailstock quill diameter: 60 mm Tailstock quill stroke: 80 mm Tailstock taper: MT 4 MACHINE DETAILS Control: Fanuc Oi-TD Total connected load: 25 kVA Dimensions & Weight Required floor space approx.: 8.5 x 2.5 x 2.0 m Machine weight approx.: 3.2 t Operating hours Control on-time: approx. 26,932 h Machining time: approx. 7,546 h EQUIPMENT Documentation Chip conveyor Coolant system Tailstock Parts catcher Signal lamp Hydraulic unit SEOAM CAH-08 3-jaw chuck HAINBUCH nova size 65 collet chuck Tool measurement Interface for bar feeder Breuning SIMAG 70.1-3000 bar loading magazine Various tool holders

Peržiūrėti detales

Reklamuokite čia