Horizontalus apdirbimo centras

MORI SEIKI SH 400

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 250 mm, Y ašies eiga: 880 mm, Z ašies eigos atstumas: 800 mm, valdiklio modelis: TNC 430 Heidenhain, veleno greitis (maks.): 12 000 aps./min, TECHNICAL DETAILS Travel Range X-axis: 1,250 mm Travel Range Y-axis: 880 mm Travel Range Z-axis: 800 mm Main Spindle Max. Speed Range: 12,000 rpm Drive Power: 15 / 10 kW Max. Torque: 500 Nm Tool Holder: SK 40 Work Table Nksdoyxmd Tepfx Aglow Clamping Surface: 1,500 x 1,050 mm Max. Table Load: 2,500 kg Number of T-slots: 10 T-slot Width: 18 H7 mm T-slot Spacing: 100 mm Tool Changer Number of Tool Stations: 60 Max. Tool Diameter: 80 mm Max. Tool Diameter with Free Adjacent Slot: 160 mm Max. Tool Length: 315 mm Max. Tool Weight: 8 kg Total Max. Weight: 100 kg Feed Rates Rapid Traverse (X / Y / Z axis): 15 m/min Feed Rate: 10,000 mm/min MACHINE DETAILS Control Model: TNC 430 Heidenhain Total Power Requirement: 29 kW Dimensions & Weight Required Space: approx. 7.0 x 5.0 x 3.3 m Machine Weight: approx. 16.0 t EQUIPMENT Documentation Chip Conveyor Coolant System Tool Changer Note: Transport rigging must be organized by the buyer!

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 315357, sukimosi skersmuo virš skersinio stumduko: 420 mm, tekėjimo ilgis: 1 000 mm, tekėjimo skersmuo: 600 mm, veleno greitis (maks.): 3 200 aps./min, valdiklio modelis: Eltropilot Heidenhain, TECHNICAL DETAILS Turning length: 1,000 mm Swing diameter over bed cover: 600 mm Swing diameter over flat guide: 420 mm Travel distance X-axis: 275 mm Travel distance Z-axis: 1,065 mm Main spindle Speed range: 16 - 3,200 rpm Drive power: 27 kW Max. torque: 800 Nm Spindle diameter at front bearing: 120 mm Spindle bore: 85 mm Chuck diameter: 260 mm Spindle nose: 220H5 Tool turret Number of tool stations: 12 Tool shank diameter: 40 mm Turret indexing time: 0.8 s Tailstock Quill diameter: 100 mm Quill stroke: 120 mm Tailstock taper: MK 5 Max. quill pressure: 9,500 N Feeds Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 15 m/min Feed force X-direction: 5,000 N Feed force Z-direction: 1,000 N MACHINE DETAILS Control unit model: Eltropilot Heidenhain Operating voltage: 400 V Frequency: 50 Hz Operating current: 76 A Total power requirement: 52 kVA Dimensions & Weight Space requirement: approx. 5.5 x 2.5 x 2.1 m Machine weight: approx. 7.5 t EQUIPMENT Documentation Chip conveyor Nodpjyxmursfx Aglskw Coolant system Tailstock Hydraulic unit Three-jaw chuck (model: SMW KNCS-N-260-72) Note: An RMS sensor is installed in the machine!

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, veleno greitis (maks.): 8 000 aps./min, tekėjimo skersmuo: 18 mm, valdiklių gamintojas: Siemens, Įranga: drožlių transporteris, strypų padavėjas, TECHNINĖS DETALĖS Sukimosi skersmuo: 18 mm (16 mm) Veleno apsisukimų dažnis: 800 - 8.000 aps./min Veleno skritulio skersmuo: 180 mm Pagrindinio veleno pavaros galia: 11 kW Sukimo momentas: 18 Nm Strypų padavimas: maks. 80 mm Išilginis slidinėjimo eiga: 50 mm (63 mm) Skersinio slidinėjimo eiga: 20 mm (32 mm) ĮRENGINIO DETALĖS Valdymas: Siemens Matmenys ir svoris Užimamas plotas apytiksliai: 6,0 x 1,5 x 2,2 m Įrenginio svoris apytiksliai: 5,5 t ĮRANGA CO2 gesinimo įrenginys Kraft&Bauer Ruez grandininis transporteris IEMCA strypų padavėjas PRA 52 42 F Įrankių rinkinys Njdpsyxmrqofx Agljkw Kreivių rinkinys Įvairūs spaustuvai Dokumentacija Skiedrų transporteris Aušinimo skysčio sistema Detalių išleidimo sistema Signalinė lempa Sąsaja strypų padavėjui Hidraulinis blokas

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 380 mm, tekėjimo skersmuo: 450 mm, veleno skylė: 59 mm, sukimosi greitis (maks.): 5 000 aps./min, valdiklio modelis: Seicos 40L Multi, TECHNINĖS DETALĖS Sukimosi skersmuo: 450 mm Sukimosi ilgis: 380 mm Didžiausias apdirbimo skersmuo: 340 mm Pastūmos eiga X ašyje: 215 mm Pastūmos eiga Z ašyje: 400 mm Strypo praleidimas: 51 mm Nkjdjyxmkaepfx Aglew Sukimosi greičio diapazonas: 30–5 000 aps./min Pagrindinio veleno variklio galia: 11 / 7,5 kW Suklio antgalis: A2-6 Suklio anga: 59 mm Guolio skersmuo: 100 mm Revolverio galva: 16 pozicijų Padavimo greitis: 0,001–500 mm/min Greitaeigė eiga X/Z: 30 m/min Įrankio kotelio matmenys: 25 x 25 mm Gręžimo kotelio skersmuo: 40 mm Grąžto griebtuvo kūgis: MK 5 Grąžto griebtuvo poslinkis: 300 mm STAKLIŲ DETALĖS Valdymas: Seicos 40L Multi Bendras energijos poreikis: 23 kVA Matmenys ir svoris Užimama vieta: apie 5,5 x 2,8 x 2,2 m Staklių svoris: apie 4,6 t ĮRANGA Dokumentacija Drožlių transporterio mechanizmas Grąžto griebtuvas Signalinė lemputė Detalių nuvedimas Įrankių matavimo svirtis Darbinės zonos apšvietimas Įrankių laikiklis

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 08500, sukimosi skersmuo virš skersinio stumduko: 225 mm, tekėjimo ilgis: 1 000 mm, tekėjimo skersmuo: 400 mm, veleno greitis (maks.): 4 000 aps./min, valdiklio modelis: EPL 2, TECHNICAL DETAILS Max. turning diameter: 400 mm Turning length: 1,000 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 225 mm Travel X-axis: 260 mm Travel Z-axis: 1,040 mm Main spindle Speed range: 20 - 4,000 rpm Drive power: 11 kW Max. torque: 75 Nm Spindle bore: 72 mm Chuck diameter: 185 mm Spindle nose: 140H5 Spindle bearing diameter (front): 100 mm Tool turret Number of tool stations: 12 positions Tailstock Quill diameter: 80 mm Quill stroke: 100 mm Tailstock taper: MT 4 Max. quill pressure: 8,000 N Feeds Rapid traverse (X-/Z-axis): 10 m/min Feed rate (X-/Z-axis): 5 m/min Feed force (X-axis): 5,000 N Feed force (Z-axis): 8,000 N MACHINE DETAILS Control model: EPL 2 Operating voltage: 380 V Frequency: 50 Hz Operating current: 76 A Total power requirement: 29 kW Dimensions & Weight Space requirement approx.: 4.6 x 2.1 x 2.0 m Machine weight approx.: 4.0 t Nedpfxeyxm Tno Agljkw EQUIPMENT Chip conveyor Three-jaw chuck Documentation

Būklė: Defektas atsarginių dalių laikiklis (naudotas), Gamybos metai: 2005, Funkcionalumas: neveikiantis, tekėjimo ilgis: 600 mm, tekėjimo skersmuo: 140 mm, veleno greitis (maks.): 5 000 aps./min, X ašies eiga: 110 mm, Z ašies eigos atstumas: 360 mm, valdiklio modelis: Siemens 840 D PowerLine, TECHNICAL DETAILS Nsdpfx Agoyxgc Nsljkw Turning diameter: 140 mm Turning length: 600 mm Distance between spindles: 615 mm Travel X-axis: 110 mm Travel Z-axis: 360 mm Travel Y-axis: 70 mm B-axis: 2x +/-1° Rapid traverse (X / Y / Z axis): 25 / 12 / 50 m/min Main spindle Max. speed: 5,000 rpm Drive power: 20 / 27 kW Max. torque: 105 / 145 Nm C-axis positioning: 0.001° Chuck diameter: 140 - 160 mm Spindle nose: ISO 702/1 A5 Max. bar diameter: 65 mm Spindle bearing diameter: 110 mm Counter spindle Max. speed: 5,000 rpm Drive power: 20 / 27 kW Max. torque: 105 / 145 Nm C-axis positioning: 0.001° Chuck diameter: 140 - 160 mm Spindle nose: ISO 702/1 A5 Max. bar diameter: 65 mm X-axis travel: 150 mm Y-axis travel: 600 mm Spindle bearing diameter: 110 mm Tool turret Quantity: 3 Tool holder: VDI 25 x 48 DIN 69880 Number of tool positions: 3 x 12 Number of driven tool stations: 3 x 12 Max. speed of driven tools: 6,000 rpm Drive power for driven tools: 8 kW Max. torque: 16 Nm MACHINE DETAILS Total connected load: 53 kVA Dimensions & Weight Footprint: 8.0 x 3.5 x 2.5 m Machine weight: 6.5 t EQUIPMENT 2(3) Y-axes +/-35 mm 2 B correction axes (+/-1°) Chip conveyor Parts catcher Tool breakage monitoring Bar feeder: IRCO Profimat 65.6

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2013, veikimo valandos: 7 546 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 284 mm, tekėjimo skersmuo: 300 mm, veleno skylė: 62 mm, veleno greitis (maks.): 4 500 aps./min, valdiklio modelis: Fanuc Oi-TD, TECHNICAL DETAILS Max. turning diameter: 300 mm Max. turning length: 284 mm Swing diameter over bed: 550 mm Chuck diameter: 210 mm Bar capacity: 51 mm Spindle nose: A2-6 Max. main spindle speed: 4,500 rpm Spindle bore: 62 mm Spindle bearing diameter: 100 mm Main spindle drive power: 11 / 7.5 kW Travel - X-axis: 170 mm Travel - Z-axis: 335 mm Number of tool stations: 12 pos. Tool size: Ø25 x Ø40 mm Rapid traverse (X / Z): 36 / 36 m/min Tailstock quill diameter: 60 mm Njdpfx Ajyxmmusglekw Tailstock quill stroke: 80 mm Tailstock taper: MT 4 MACHINE DETAILS Control: Fanuc Oi-TD Total connected load: 25 kVA Dimensions & Weight Required floor space approx.: 8.5 x 2.5 x 2.0 m Machine weight approx.: 3.2 t Operating hours Control on-time: approx. 26,932 h Machining time: approx. 7,546 h EQUIPMENT Documentation Chip conveyor Coolant system Tailstock Parts catcher Signal lamp Hydraulic unit SEOAM CAH-08 3-jaw chuck HAINBUCH nova size 65 collet chuck Tool measurement Interface for bar feeder Breuning SIMAG 70.1-3000 bar loading magazine Various tool holders

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 510 mm, Y ašies eiga: 510 mm, Z ašies eigos atstumas: 460 mm, valdiklio modelis: Mazatrol Fusion 640M, veleno greitis (maks.): 12 000 aps./min, TECHNICAL DETAILS Travel X-axis: 510 mm Travel Y-axis: 510 mm Travel Z-axis: 460 mm Swivel range A-axis: +30° / -120° Rotation range C-axis: +/- 360° Feed rate range (X-/ Y-/ Z-axis): 1 - 50,000 mm/min Rapid traverse (X-/ Y-/ Z-axis): 50 m/min Indexing A and C: 0.001° Switchover time 90° A/C: 1.9 / 1.5 s Main spindle Max. spindle speed: 12,000 rpm Main spindle drive power: 22/15 kW Tool holder: ISO 40 Spindle diameter: 80 mm Acceleration time to max. speed: 1.7 s Worktable Clamping area: 500 x 400 mm Nodpfxoyxmq Te Aglskw Number of T-slots: 5 T-slot width: 18 mm T-slot spacing: 80 mm Spindle-to-table distance: 190 - 650 mm Max. workpiece size: 500 x 500 x 405 mm Max. table load: 300 kg Tool changer Max. number of tool stations: 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent station: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool change time: 4.5 s MACHINE DETAILS CNC control: Mazatrol Fusion 640M Total power requirement: 51 kVA Dimensions & Weight Space requirements: 3.4 x 3.7 x 2.8 m Machine weight: 7.5 t EQUIPMENT Hydraulic unit Coolant system Chip pan Tool measurement Documentation

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2000, veikimo valandos: 21 269 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0082, tekėjimo ilgis: 1 500 mm, tekėjimo skersmuo: 580 mm, X ašies eiga: 598 mm, Y ašies eiga: 230 mm, Z ašies eigos atstumas: 1 660 mm, TECHNICAL DETAILS Travel path X-axis: 598 mm Travel path Y-axis: 230 mm Travel path Z-axis: 1,660 mm Maximum turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Main spindle Main spindle speed range: 12 – 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Drive power – main spindle: 37 (30) kW C-axis accuracy: 0.001° Rapid traverse X/Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 rpm Cutting feed rate: 0.001 – 1,000 mm/rev Nedpfxjyxmyuo Aglskw Tool turret Type: H2 ATC Number of tool stations: 2 (1x L-tool / 1x M-tool) positions Driven stations: stepless Speed range – driven tool stations: 40 – 3,000 rpm Tool shank height: 25 mm Boring bar shank diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool magazine Number of tool stations: 50 positions Tool holder: MAS BT 50 Maximum tool diameter: 170 mm Maximum tool length: 350 mm Maximum tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Total connected load: 53 kVA Dimensions & Weight Space requirement: 6.0 x 3.2 x 3.0 m Machine weight: 18.5 t Operating hours Main switch on-hours: 79,607 h NC operating hours: 27,814 h Main spindle hours: 21,269 h EQUIPMENT Chip conveyor Central coolant unit High-pressure cooling 20 bar Tailstock Signal lamp C-axis Y-axis Hydraulic unit Steady rest Various tool holders (44 pcs) Three-jaw chuck Schunk – ROTA NC 400-120 Electronic handwheel

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 250 mm, Y ašies eiga: 880 mm, Z ašies eigos atstumas: 800 mm, valdiklio modelis: TNC 426 Heidenhain, veleno greitis (maks.): 12 000 aps./min, TECHNICAL DETAILS Travel Range X-axis: 1,250 mm Travel Range Y-axis: 880 mm Travel Range Z-axis: 800 mm Main Spindle Max. speed range: 12,000 rpm Drive power: 15 / 10 kW Max. torque: 500 Nm Tool holder: SK 40 Nkodpfxoyxmmns Aglow Work Table Clamping surface: 1,500 x 1,050 mm Max. table load: 2,500 kg Number of T-slots: 10 T-slot width: 18 H7 mm T-slot spacing: 100 mm Tool Changer Number of tool stations: 30 Max. tool diameter: 80 mm Max. tool diameter with adjacent empty station: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Max. total tool weight: 100 kg Feed Rates Rapid traverse (X / Y / Z axis): 15 m/min Feed rate: 10,000 mm/min MACHINE DETAILS Control model: TNC 430 Heidenhain Total power requirement: 29 kW Dimensions & Weight Space requirements: approx. 7.0 x 5.0 x 3.3 m Machine weight: approx. 16.0 t EQUIPMENT Documentation Chip conveyor Coolant system High-pressure cooling Measuring probe (manufacturer: Heidenhain) Internal coolant supply Note: The transport rigging must be organized by the buyer!

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, veleno greitis (maks.): 7 000 aps./min, veleno skylė: 42 mm, valdiklio modelis: Siemens 840 D - SL, priešpriešinio veleno didžiausias greitis: 7 000 aps./min, Įranga: drožlių transporteris, TECHNICAL DETAILS Bar diameter: 42 mm Travel X-axis 1/2/3: 180 mm Travel Y-axis 1/3: ±45 mm Travel Z-axis 1/2/3: 704 / 620 / 704 mm Main spindle Speed: 7,000 rpm Drive power: 22 kW / 16.5 kW Torque at spindle: 128 Nm / 100 Nm Spindle bore: 42 mm C-axis: 0.001° Spindle nose: 110 mm Sub spindle Speed: 7,000 rpm Drive power: 19 kW / 16.5 kW Torque at spindle: 128 Nm / 100 Nm Spindle bore: 42 mm C-axis: 0.001° Spindle nose: 110 mm Tool turret Number of turrets: 2 + 1 pos Number of tool stations: 3x 12 pos Number of driven tool stations: 3x 12 pos Driven tool speed: 8,000 rpm Power: 11.4 kW / 2.3 kW Torque: 26 Nm / 14 Nm Tool holder: VDI 25 Rapid traverse (X / Y / Z): 30 m/min Acceleration: 0.5 g MACHINE DETAILS Control: Siemens 840 D - SL Total power requirement: 60 kW Nksdpfjyxmnxex Aglow Dimensions & Weight Footprint: approx. 8.2 x 3.3 x 2.5 m Machine weight: approx. 7.5 t EQUIPMENT Documentation Chip conveyor Knoll High-pressure coolant (14 bar) Parts catcher Sub spindle Interface for bar feeder Bar loading magazine Spinner Barload BL 0146 C-axis: 2x 0.001° Hydraulic unit Hainbuch collet chuck Y-axis: 2x ±45 mm Various tool holders Various collets Tool setting arm