Vakuuminės kameros kryžminio srauto vakuuminis džiovintuvas

Mühlböck GSVW-3080-1250-1-F

Crossflow vacuum dryer with 31.68 m³ capacity

Gedpfx Aewrb Nkjb Sotw
The chamber holds 1 stack with a width of 1.20 m, 3 stacks in a height of 0.80 m with 0.10 m thick spacer beams, for a maximum timber length of 16.0 m plus 0.5 m clearance.

The chamber has a net capacity of approx. 19 m³ of edged timber with a thickness of 50 mm and stacking slat thickness of 24 mm.

Usable dimensions: Width 1.20 m, Height 2.70 m, Length 12.0 m

Technical specifications (see detailed technical description under Documents)
- Stainless steel cylinder with 80 mm thick, resin-bonded rock wool insulation, and a rear-ventilated exterior cladding made of aluminium trapezoidal sheet.
- A vacuum door with special locking mechanism for easy end-side loading using walk-in wagons.
- A vacuum water ring pump with a capacity of 5.5 kW evacuates the dryer (to be replaced in April 2025).
- Air circulation through the stacks is ensured by 12 fans, each with a rated power of 1.5 kW in delta configuration. Under vacuum, the average power consumption is only approx. 0.5 kW per fan.
- Hot water heat exchanger installed for max. 98 kW at 90°C supply temperature.
- Electrical connection rating is 47 amps at 3 x 400 V / 50 Hz.
- Excess moisture is condensed via air heat exchangers.
- Chamber climate can be humidified as needed via a hot water-heated evaporation basin.
- The chamber operates fully automatically. Only wood type, wood thickness, and desired final moisture need to be input.
- MB4000 V control system incl. operator panel
- 10 wood moisture measuring points as well as climate and temperature sensors
- Exit rails need to be reordered as existing rails are embedded in concrete.

Price is ex works and net, payable before dismantling the system. Dismantling/removal must be carried out by the buyer and is not included in the price.

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.