Perforavimo mašina

LVD PULLMAX 720

Būklė: geras (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, HESSEMANN 3-HEAD SANDER: Abrasive belt dimensions: 2,620 x 1,400 mm 1 Longitudinal sanding unit (with contact roller for calibration work (steel)), diameter: 250 mm Belt speeds: approx. 18 m/s, 22 kW Non-wearing brake unit, automatic length adjustment Psdpfx Asx Rdn Tocasgp Dust extraction device controlled in relation to the workpiece, counter-rotating abrasive belt, abrasive belt grit compensation managed by computer Belt speeds: 1.0 - 18 m/s Drive: 15 kW 1 Longitudinal sanding unit Belt speeds: 1.0 - 18 m/s Drive: 15 kW Incl. continuously variable sanding speed adjustment via electronic frequency controller, connected to double row of extraction ports for dust removal device. Non-wearing brake unit, automatic length adjustment of potentially different edge lengths of the abrasive belt, dust extraction device controlled depending on the workpiece, disconnectable, counter-rotating abrasive belt. 2 pressure beams with selective pressure adjustment system CSD® system Continuously variable adjustment of the pressure for individual pressure elements, for both single and multiple feed. Spacing: 32 mm. Tolerance compensation for workpieces up to 2 m via maintenance-free pressure magnets. Working width and sanding start/end of the pressure beam are set electronically. The pressure elements are actuated by lifting electromagnets, enabling continuous variation of the force on each sanding pad as the workpiece passes through the machine. This innovative CSD® technology always guarantees a proportionally equal pressure relative to the pad's overlap on the workpiece. The risk of breakthrough on edges is almost completely eliminated by this dynamic, continuously regulated pressure control.

Būklė: naudotas, Gamybos metai: 2004, • Cutting width (mm): 1300 • Maximum workpiece thickness (mm): 3 - 140 • Deburring device: brush roller diameter 150 mm • Drive for deburring device (kW): 1.5 Podpfx Acett Slceasgp • Conveyor table: 3.0 kW frequency-controlled / 4.0 kW • Feed speed (m/min): 5 - 25 • Workpiece transport belt vacuum clamping system (kW): 7.5 • Total weight (kg): approx. 7500 • Total connected load (kW): approx. 73

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2016, Gamintojas: LVD Modelis: Electra FL3015 Serijos numeris: 36445 Kilmės šalis: Belgija Podpfxeyhppvs Acaogp Pagaminimo metai: 2016 Techniniai parametrai: Lazerių tipas: Pluoštinis lazeris Šaltinio galia: 3 kW Darbinė sritis: 3000 mm × 1500 mm Lazerių šaltinis: Rofin FL030 pluoštinio lazerio šaltinis Šaltinio serijos numeris: 987 Šaltinio pagaminimo metai: 2015 Papildoma įranga: Thermotec aušinimo blokas – aušinimo blokas lazerio šaltinio temperatūros stabilizavimui Donaldson Torit DCE DFPro-4SPK – lazerio dūmų ištraukimo ir filtravimo sistema Įėjimo/išėjimo stalas – automatinis pakrovimo ir iškrovimo stalas Šviesos apsauginė tvorelė – šviesos apsaugos sistema

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 350 mm, bendras svoris: 10 000 kg, įėjimo srovė: 153 A, Heesemann LSM8 Surface Sanding Machine QLkLBw Sanding Width: 1350 mm CROSS/LONGITUDINAL/LONGITUDINAL Machine Base: Conveyor unit with a single transport belt; feed speed adjustable between 3 - 15 m/min via frequency control, including transport belt cleaning device. Constant working height of 920 mm; adjustment to various workpiece thicknesses (3 - 80 mm) by motor-driven adjustment of the upper machine section. Toothed belt cover for the lifting gear provides dust protection. Lifting gear toothed belt is monitored and controlled, integrated into the switch cabinet. 1. Cross Sanding Unit - Belt dimensions: 5,400 x 150 mm - Drive power: 13/17 kW - Sanding belt equipped with additional blasting tube for the belt cleaning device, wear-resistant brake unit, pressure segment belt system, intermittent belt cleaning blast device, belt running control. Includes door with glass insert. 2. Longitudinal Sanding Unit - Belt dimensions: 2,620 x 1,350 mm - Drive power: 13/17 kW - Belt, in combination with double the number of blasting holes in the belt cleaning device, wear-resistant brake unit. Automatic compensation for differences in belt length, sanding belt runs against feed direction, intermittent dust blasting device, infra-red belt monitoring. Eccentric bearing for the front (steel) roller for light calibration; controlled via operator terminal. 3. Longitudinal Sanding Unit - Belt dimensions: 2,620 x 1,350 mm - Belt speeds: 0.5 - 18 m/s - Drive power: 17 kW (frequency controlled) - Infinitely variable sanding belt speed, with twice the number of blasting holes in the belt cleaning device, wear-resistant brake unit, automatic compensation for belt length differences, sanding belt runs against feed direction, intermittent belt cleaning blast, infra-red belt monitoring. 4. Brush Roll Unit - Centrally height-adjustable; includes extraction hood and press-on roll. - Diameter: 150 mm - Drive power: 1.5 kW - Bristle type: fibre 5. Workpiece Suction Device - For secure transport of workpieces shorter than 500 mm in the feed direction, including integrated ventilator Voltage: 400 V, 50 Hz Belt Change: Left Control Terminal: Left 6. Ionization Bar (Top) - For removal of static charge, incl. high-voltage transformer Pgodpfxjxp Hvns Acajp 7. Workpiece Blasting Device with Rotating Compressed Air Nozzles (within the machine frame) The machine is ready for operation at your facility following a complete mechanical and electrical overhaul by authorized Heesemann service personnel. A new conveyor belt is fitted. Start-up and operator training at the customer’s location can be arranged. Transport costs are negotiable – loading is included in the price. If you have any questions, I am available. Paweł Szczepański +48 795 517 258

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Manufacturer: LVD Model: PPEBturbo 220 Type: PPEB-EFL 220/30 Year of manufacture: 2006 Serial number: 30494 Technical Specifications: Maximum pressing force: 2,200 kN (220 tons) Psdpfx Aeyhdyiocajgp Working length: 3,050 mm Distance between uprights: 2,600 mm Maximum ram stroke: 450 mm Maximum table throat depth: 685 mm Throat (daylight opening): 450 mm X-axis stroke: 600 mm Table width: 120 mm Speeds: Approach speed: 120 mm/s Working speed: 21 mm/s Return speed: 200 mm/s Drive and Hydraulics: Motor power: 37 kW Power supply: 400 V Pump: adjustable Hydraulics: Bosch / Rexroth SYDFE1 Oil tank: 350 l Additional Specifications: Control: LVD Cadman CNC Noise level: 80 dB(A) Machine weight: approx. 14,500 kg Axes: Y-axis – Up and down movement of the beam X-axis – Positioning and bending distance adjustment R-axis – Positioning and downward movement 2 x Z-axis – Lateral and counter-motion stopper 2 x Z-axis – Forward and backward movement with slight tilt of X-axis V-axis – Easy-Form Laser Crowning – Bending distance compensation

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Wir präsentieren ein vollautomatisches Faserlaser-Schneidsystem mit integriertem Lagersystem, roboterunterstütztem Handling und Hochgeschwindigkeits-Präzisionsleistung, speziell entwickelt für industrielle Produktionsumgebungen. KIMLA POWERCUT LF1530 Faserlaser-Schneidsystem (Vollautomatische Linie) Modell: KIMLA POWERCUT LF1530 Hersteller: KIMLA Baujahr: 2020 Zertifizierung: CE-zertifiziert Steuerung: Vollständige CNC-Digitalsteuerung Technische Daten Installationslänge 12.500 mm Installationsbreite 7.200 mm Installationhöhe 3.000 mm Nennformat Blech (X-Achse) 3.000 mm Nennformat Blech (Y-Achse) 1.500 mm Schneidbereich X-Achse 3.050 mm Schneidbereich Y-Achse 1.550 mm Schneidbereich Z-Achse 120 mm Max. Verfahrgeschwindigkeit (alle Achsen) 230 m/min Max. Verfahrgeschwindigkeit (X/Y-Achsen) 230 m/min Max. Verfahrgeschwindigkeit (Z-Achse) 70 m/min Beschleunigung (X/Y-Achsen) 6G Wiederholgenauigkeit 0,001 mm Positioniergenauigkeit 0,002 mm Max. Werkstückgewicht 900 kg Laserquelle Faserlaser, 4.000 W (IPG) Pulsfrequenz ±1–2.500 Hz Gesamtanschlussleistung (ohne Absaugung & Kühler) 30 kW Antriebssystem Linearantriebe auf allen Achsen Optische Linear-Encoder Ja Werkstückmess-/Scansystem RENISHAW oder gleichwertig, induktiv Automatisches Blechlade-/Entladesystem & Lagersystem Integriert, 12 Plätze, je 2.000 kg Wechseltische Ja, 3 Stück Tischwechselgeschwindigkeit 1 m/s Rohrschneideoption Ja, auf drittem Palettentisch Dynamische Bahnregelung (Trajektorienoptimierung) Ja Roboterteilhandling-System Ja, Roboterarm mit vollständiger Integration Pgedpfxjy Nwtys Acasp Dokumentation Englisch CE-Konformität Ja Steuerung Digital (CNC) Ersatzteile und Werkzeuge Ja