Briaunų apklijavimo mašina

LOHMEYER 735 S IQ

Būklė: naudotas, Gamybos metai: 2008, Used machine Year of manufacture: 2008 Equipment and technical specifications: - Round pot glue unit - With second glue unit for PUR processing - Feed unit with automatic edge banding magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motor-driven saw units for front/end cap cutting - Top/bottom milling: 2 milling units with copying wheels for radius or chamfer - Radius scraper: pneumatically controlled, post-processing of radii - Flat scraper: for smoothing edge surfaces - Polishing unit: 2 polishing wheels with motors for final finish - Riepe spraying system - Control system: PLC with control panel - Feed frequency converter replaced by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3–12 mm - Power supply 3x 400 V AC, 50 Hz Dusdoyqanbspfx Ahrsw - Rated output 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Machine dimensions: approx. 6120x840x1385 mm Machine weight: approx. 3,000 kg Availability: short-term Location: Röllbach

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Panel dividing system PA 4115 – 3100 x 3100 DNC-AT Condition: completely overhauled Warranty: 1 year warranty Djdpfx Aoxhg Ibohrjuw Technical specifications: Left angle stop in accordance with AGA 4383 Longitudinal saw FM 16-3100: - Hardened guides - Automatic forward and return movement of the saw unit - Return movement with automatic lowering - Feed speed: 2–50 m/min (infinitely adjustable via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in the machine base and pressure beam - Scoring saw adjustable from the outside (without opening the safety cover) Saw unit with regulated DC drive: - Precise positioning (e.g. for cut-outs) - Slowed exit from the cut - Includes safety hood interlock, lamella curtain SZ 5008 - Offcut device SP 5004 – offcuts down to a minimum of 5 mm - Main saw motor: 7.0 kW - Scorer motor: 1.1 kW (individually switchable) - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: limit value of 2 mg/m³ clearly undercut - CE compliant Angle pressure unit WP 5003: - With pressure claw for crosscuts - Adjustment range up to 2400 mm - Semi-automatic operation Material feed table HP 5021 (mounts to rear of FM 16): - Parallel fence with 6 spring-loaded clamping fingers - Direct drive of the material pusher via servo motor - Table surface with closed Pertinax panels (suitable for narrow strips) - Feed speed: 25 m/min (safety-limited) - Return speed: 40 m/min - Table length: 3100 mm - Stop depth: 3100 mm Multi-microprocessor control system - Integrated PC with hard drive - Operating system: LINUX - Interfaces: serial + parallel, USB - Network connection (also Wireless LAN) - Optimize cutting plans in the office and send directly to the machine - Multitasking capability - Printing function via USB - Remote maintenance via Internet (Remote Desktop, TeamViewer) - Multilingual dialog programming - 15” flat screen + multifunction keyboard - Swiveling control panel - Graphical display of cutting plans and workflows Additional equipment: Angle stop table HP 5043 (front): - Machined steel angle, table top made of Pertinax - Table size: 1800 × 800 mm Workpiece support table HP 5025 (front): - Pertinax table top - Table size: 1800 × 800 mm Air cushion device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 circular saw blade KSB 4006 – Ø 200 mm, Z=60 conical (for scoring saw)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, Arol Closys Eagle VP dangtelių uždarymo mašina yra nepakeičiamas įrenginys įmonėms, siekiančioms optimizuoti savo vakuuminio pakavimo procesą. Ji užtikrina efektyvų 84 mm skersmens stiklainio sandarų uždarymą, kas garantuoja geriausias produkto išsaugojimo sąlygas. Dėl pažangios technologijos ši mašina užtikrina tobulą vakuumą induose, todėl maisto produktų galiojimo laikas prailginamas, o kokybė išlieka. Dangtelių uždarymo mašina turi dangtelių kėlimo „žirafos“ mechanizmą, kuris palengvina darbo eigą ir padidina našumą. Arol dangtelių uždarymo mašina išsiskiria patikimumu ir tvirtumu, tad užtikrina ilgalaikį naudojimą. Be to, ją lengva integruoti į esamas gamybos linijas, tad perėjimas vyksta sklandžiai. Jos valdymas paprastas ir intuityvus, todėl sumažėja personalo apmokymo laikas. Taipogi ši mašina padeda padidinti našumą neaukojant galutinio produkto kokybės. Įmonės su ja gali pagerinti savo konkurencingumą rinkoje. Pasirinkę Arol dangtelių uždarymo mašiną, renkatės laiko patikrintą sprendimą, naudojamą daugelyje pramonės šakų nuo 2011 metų. Ši įranga atitinka aukštus higienos ir maisto saugos reikalavimus. Apibendrinant, tai yra ideali mašina norint pagerinti pakuotės grandinės efektyvumą ir užtikrinti klientų pasitenkinimą. Techninės charakteristikos: Stiklainių skersmuo: 84 mm Dusdpfxsu Nwiyj Ahrow Vakuuminio dangtelių uždarymo mašina Dangtelių užkėlimo žirafa Metai: 2011

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, Parduodama naudota kraštų laminavimo staklės BRANDT KDF 440 C, HOMAG grupės gamyba. Pagaminimo metai: 2017 Priešfrezavimo agregatas Klijavimo agregatas Spaudimo zona Kirtimo agregatas (2 varikliai) Daugiaetapis frezavimo agregatas Forminis frezavimo / kampų kopijavimo agregatas (1 variklis) Profilinė ir plokščioji traukimo geležtė Poliravimo agregatas Pasiūlos greitis 14 m/min Galima naudoti EVA ir PUR klijus PoweTouch valdymas PU viršutiniai spaudimo voleliai Nedaug darbo valandų Dodpfxozc D D Do Ahrsuw Galima įsigyti nuo 2026 m. birželio Labai gera būklė.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, OTT Tornado FÜ + PU SPS-compatible control system with 7" TFT touch color display CM-CombiMelt for EVA and PUR hot-melt adhesives Pre-milling unit - jointing Fully automatic roll magazine Fully automatic edge magazine Pneumatic flush trimming 0–3° Flush trimming up to 12 mm Radius trimming R-2, R-5 Bevel trimming 0°/15°/30°/45° Corner rounding Radius scraper blade Surface scraper blade Sound enclosure cabin with integrated space extraction Cleaning set with 4-way spraying unit, fine buffing device, and glide agent spraying station First delivery: 2006 Machine is WORKSHOP TESTED and in EXCELLENT CONDITION Dujdpfev Sm Hcox Ahrew The adhesive unit was recently fully serviced and wear parts replaced Technical data: Edge thickness: 0.4 – 8 mm Panel thickness: 8 – 40 mm Minimum panel length: 150 mm Minimum panel width: 70 mm Feed speed: 14 m/min Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm Trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Fine trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Corner copying unit Scraper blade Buffing unit 3-way spraying Total power: 17.5 kW Dimensions: Length: 6180 mm Width: 1770 mm Weight: 3100 kg - Immediately available -

Būklė: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Parduodama briaunų klijavimo staklės Brandt KDF 660. Dusdoyhqa Nspfx Ahrow

Būklė: geras (naudotas), Gamybos metai: 2011, Single-sided edge banding machine, right-hand version with workpiece return, suitable for hot-melt or/and PU bonding, used, year 2011, approx. 8,700 operating hours. Edge thickness: 0.4 – 10 mm Workpiece dimensions: Minimum width: 70 mm, minimum height: 8 mm, maximum height: 60 mm, minimum length: 150 mm Feed speed: 14 – 20 m/min, steplessly variable Adhesive application: adhesive application roller with Vario-melt dosing automation Working height: 900 mm Machine dimensions: height: 1,600 mm, width: 1,100 mm, length: 8,200 mm Machine weight: 4,000 kg Machine equipped with: - Double pressure rollers with electronic positioning - Pneumatic control of all units via central touch-screen operation with Beckhoff industrial PC - CM – CombiMelt gluing system Processing units: - FK – Jointing unit for joining particle boards with 2 HF motors, 2.2 kW, 200 Hz, 12,000 rpm, configured for synchronous and counter rotation, feed-controlled. Tool: DIA jointing set Ø 85 x 45 x 30, z 3, for panel thicknesses up to 42 mm - AKM – Edge magazine for automatic feeding of strip edging, with spiked roller feed and pneumatic pressure beam. Including optical edge monitoring - M4+1 – Fourfold magazine, automatic reel retraction, accommodates four edge reels, with variable edge slot for alternate edging, with automatic selection menu - K 13 – Double end trimming unit with 2 HF motors 0.6 kW, 200 Hz, 12,000 rpm, motors and saw blades pneumatically tiltable 0/5° - K 160 – 2 HM saw blades 140 x 3.2 x 16 mm, Z 36 - Bfc – Flush trimming unit for pre-trimming the glued edges in counter rotation. Single-sided sensing, feed by program control, 2 HF motors 0.7 kW, 200 Hz, 12,000 rpm. Tool: 2 HM reversible knife heads Ø 70 x 20 x 16 mm, z 4 (HF70) - HFt – Fine trimming unit for radius milling of glued edges in counter rotation. Double-sided sensing, automatic adjustment by program to edge thickness. 2 HF motors 0.3 kW, 200 kW [likely typo, should confirm], 12,000 rpm. Tool: 2 HM reversible knife heads Ø 70 x 20 x 16 mm, z 4 (HF70); optionally equipped with radius tools - HFt – Fine trimming unit for radius milling of glued edges in counter rotation. Double-sided sensing, automatic adjustment by program to edge thickness. 2 HF motors 0.3 kW, 200 kW [likely typo], 12,000 rpm. Tool: 2 HM radius-reversible knife heads (AR 73), Ø 73 x 16 x 16, z 3 for reversible blades R 1 – R 3 - AKF – Automated copying milling unit with two separate operating spindles for top and bottom; 2 HF motors 0.37 kW, 200 Hz, 12,000 rpm, tool: 2 PCD diamond radius tools Ø 73 x 13 x Ø 16, with integrated extraction - AZK 4 – Automatic changeover unit for scraping knives - ZKf – Surface scraper unit with fine adjustment for removal of glue residue in the joint area, with extraction Additional equipment: - AS – Antistatic spray unit, double, on glue joint - GS – Lubricant spray unit for applying antistatic lubricant to the edge surface, electronically controlled - RS – Cleaning set with 4-fold spraying device and fine buffing unit for surface cleaning - KEO-c – Edge polishing, oscillating and automatically adjustable, 2 motors 0.2 kW, with 2 cloth discs Duedpfx Ahezb Iuqorjw - WE – Angle insertion aid as folding push sled for small parts - Interface for workpiece return Ligmatech ZHR 05 or equivalent

Būklė: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, Ott briaunavimo staklės, modelis EUROMATIC- FÜ - Pagaminimo metai: 2003 - BL-F automatinis įleidimo liniuotė su šildymu - FÜ- sujungimo agregatas - KM automatinis briaunų žurnalas Dedpfx Ahey S Rz Aorsuw - RM-V automatinis rulonų žurnalas - Klijavimas: 0,4 - 15 mm - Briaunos pašildymas - K16- dvigubas agregatas, 15° pasukamas, pjūklų diskai 140x3,2x16 - HF 10.1 tiesioji frezavimo agregatas viršuje ir apačioje su įrankiu - HFF- nuožulnios frezavimo agregatas viršuje ir apačioje su įrankiu - HFR užapvalinimo frezavimo agregatas viršuje ir apačioje su įrankiu - AR 4 - 4 varikliai kampų kopijavimo agregatas su įrankiu - ZK- profilio grandymo agregatas su įrankiu - KE-G - briaunų galutinis valymo įrenginys - ZKF - plokštuminio grandymo agregatas su įrankiu Stakles šiuo metu dar galima apžiūrėti ir išbandyti pas klientą.

Būklė: naudotas, Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, one-sided edge banding machine with full equipment, including a total of 3 interchangeable gluing units, 1 of which is for PUR adhesive Material dimensions: Roll material: Djdpfxjybbayj Ahrjuw - Paper and plastic edges: 0.3 - 3.0 mm - Veneer edges: 0.5 - 3.0 mm - Strips: 3.0 - 8.0 mm Edge height min. 12 mm, max. 65 mm Machine equipment: Entry fence, automatic adjustment via program Release agent unit Jointing milling unit with 2 motors, each 4 kW Blow-off nozzle for removing loose particles Gluing unit with 1.8 L glue container, equipped with QUICK-LOCK with single-roll/strip magazine 1 main pressure roller and 3 secondary pressure rollers Pressure zone adjustment automatic via program End trimming unit with 2 motors, 660 W each, swivels 0 to 8 degrees Corner copying milling unit with 2 motors of 180 W and 2 motors of 400 W max. workpiece thickness: 60 mm max. working speed: 20 m/min Automatic adjustment via program Profile scraping unit Glue joint scraping unit Cleaning agent unit Buffing unit with 2 motors, each 180 W Control: ICOS open TS, PC-based