Briaunų apklijavimo mašina

Ott Tornado

Sąlyga: naudotas, OTT Tornado - TOP Pjdpfxexy Iw Uo Afwerd Valdymas - per 15 colių spalvotą jutiklinį monitorių visiškai automatizuotam ir maksimaliai patogiam naudojimui CM-CombiMelt klijavimo sistema, tinkama EVA ir PUR karšto lydalo klijų bei visų įprastų valymo granulių apdorojimui Sujungimo apdirbimo mazgas laminuotoms plokštėms klijuoti Automatinis ritinių žurnalas Automatinis briaunų žurnalas Dvigubas kapavimo įrenginys su automatiniu pasukimu 0° / 3° Pjovimo įrenginys kantams – iki 12 mm Tiksliojo frezavimo įrenginys RADIUS – profilio frezavimas R2 - R5 Automatizuotas kopijavimo frezavimas – kampų apvalinimas Briaunų grandiklis – spindulys Briaunų grandiklis – spindulys – nuolydis Paviršiaus grandiklis Tepimo skysčio purškimo sistema – PU Valymo rinkinys su poliravimo įrenginiu Labai stabilus ruošinio laikiklis su ritininių takelių sistema – PRIEKYJE su žirklių ištraukimu Visi įrankiai komplekte Staklės beveik NAUJOS, YPAČ PRIŽIŪRĖTOS BŪKLĖS Pirmas paleidimas 2009 m., labai mažai darbo valandų – apie 1600 Įranga iš lizingo / galimybė lizingui Iš sandėlio Lieboch

Sąlyga: naujas, Power Feeder - 4 rollers - Roller diameter: 120 mm - Roller width: 60 mm - Motor power: 0.75 kW - Pole-changeable motor - Speed: 1,400 rpm - Feed speed: 3 – 18 m/min, variable - Approximate weight: 37 kg Predoh Dikwopfx Afwjd WITHOUT stand ‘Standard’ or ‘1050’ stand optionally available Notice for Used Machines: • Technical information is subject to error and prior sale. • Prices quoted are ex-works and include loading! • The machine has been cleaned and function-tested. • All machines are sold as seen without any warranty whatsoever. Buyers are free to inspect the machines at our location. • Special agreements are valid only in written form. (We only respond to inquiries that include your address and telephone number!)

Sąlyga: naudotas, Gamybos metai: 2008, Used machine Year of manufacture: 2008 Equipment and technical specifications: - Round tank glue unit - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers Predpoxdpm Sofx Afwsd - End trimming: 2 motorized saw units for front/end cap cutting - Top/bottom milling units: 2 milling units with tracing wheels for radius or chamfer - Radius scraper: pneumatically controlled, for reworking radii - Surface scraper: for smoothing the edge surfaces - Polishing unit: 2 polishing discs with motors for final finishing - Riepe spraying unit - Control system: PLC with control panel - Feed frequency inverter replaced by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3–12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connecting cable) Machine dimensions: approx. 6120x840x1385 mm Machine weight approx. 3,000 kg Availability: short-term Location: Bavaria

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: T/41242, ruošinio aukštis (maks.): 52 mm, briaunos storis (maks.): 12 mm, darbinio aukščio: 880 mm, tuščias svoris: 3 000 kg, pralaidumo greitis: 233 mm/s, TECHNICAL DETAILS Operating method: Single-sided, right-hand execution Edge thickness: 0.2 - 12 mm Workpiece dimensions Minimum width: 70 mm Minimum height: 8 mm Maximum height: 52 mm Minimum length: 150 mm Feed speed: 10 - 14 m/min Working height: 880 mm MACHINE DETAILS Processing units Jointing unit with 2 HF motors, 1.5 kW Dual end trimming unit with 2 HF motors, 0.3 kW Flush trimming unit with 2 HF motors, 0.7 kW Fine chamfering unit with 2 HF motors, 0.3 kW Fine radius trimming unit with 2 HF motors, 0.3 kW Corner rounding unit with 2 motors, 0.35 kW Scraper unit for plastic edges Dimensions & Weight Machine dimensions (L x W x H): 6,120 x 840 x 1,385 mm Machine weight: 3,000 kg Operating voltage: 400 V, 50 Hz Total connected load: 12 kW Electrical connection: 3 x 400 V, 5 x 6 mm², fuse 35 A EQUIPMENT Prsdpfxoxtfcho Afwod Double roller top pressure with electronic positioning Automatic coil magazine for coils up to 800 mm diameter with pneumatic cutting device for up to 3 mm thickness Automatic edge magazine with optical monitoring for strip edges in fixed lengths Infeed fence with automatic positioning based on entered jointing value CM - CombiMelt - modular gluing system Control system via 7-inch TFT touch color display 100 work programs freely storable alphanumerically PLC for high-resolution path control Individual frequency inverters for selective activation of processing motors Hole detection for bypassing CNC processing Network capability for integration into a data network

Sąlyga: naudotas, Gamybos metai: 2018, Edgebanding machine AKV 3006 DK - F with jointing unit including DIA tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combination milling station Radius R 2.5 mm Technical Description: - Application of hot-melt adhesive to workpieces for edge material up to 3 mm - 60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with disposable insert cutters (combination type) and fine adjustment of cutter from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Adjustable cutting depth for cross-cut saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate inspection windows from the rear and operator sides of the machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thicknesses: 8 - 40 mm - Weight: approx. 1550 kg depending on configuration Prsdpfxsxfh Tms Afwod - Dimensions (L x W x H): 5250 x 1445 x 1600 mm - 2-point pneumatic cutter adjustment, 1 unit - Switching between radius / flush / chamfer on the combination milling stations - Switching between chamfer or flush is done manually by shifting the stop flap inside the machine - Buffing station (swab) 1 unit - Corner rounding cutter 1 unit including combination tool and pneumatic chamfer/radius adjustment, max. workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm - Radius scraper 1 unit including pneumatic lifting device, radius R 2.0 mm - Surface scraper 1 unit with pneumatic engagement control - Glue pot quick-change system including second glue pot with downward glue outflow, 1 unit for quick color changes - Horizontal grooving saw unit into the edge, 1 unit including pneumatic lifting device and groove tool - Separate extraction for jointing unit, 1 unit directly at the jointing unit, vertically upward d=80 mm for optimal extraction performance, strongly recommended from AKV 3005 DK-F onward - Ball bearing for corner rounding cutter 24.1 mm, 1 unit - Ball bearing for corner rounding cutter 24.2 mm, 1 unit - Interchangeable motor 0.37 kW for corner rounding cutter, 1 unit with quick-change device including radius cutter R 1 - Interchangeable spindles, 1 set = 2 pieces, 1 unit - Set of quick-change motors for longitudinal processing above and below, including tool R 1 - Compressed air requirement: 100 - 150 l/hr Storage location: Nattheim

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Psdpelc Ewiofx Afword Automatic edge band magazine Jointing milling unit: 2 x 1.5 kW, servo-controlled End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, radius R=2, double-sided tracing Corner rounding unit: 2 x 0.3 kW Scraper unit, automatic feed Surface scraper unit, with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2x separator, 1x release agent, 2x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 - 14 m/min Continuously adjustable feed COMBI MELT gluing unit for EVA/PUR, hopper capacity 1.5 l CE mark Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: T/41242, ruošinio aukštis (maks.): 52 mm, briaunos storis (maks.): 12 mm, darbinio aukščio: 880 mm, tuščias svoris: 3 000 kg, pralaidumo greitis: 233 mm/s, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Operating mode: Single-sided, right-hand version Edge thickness: 0.2 – 12 mm Workpiece dimensions Minimum width: 70 mm Minimum height: 8 mm Maximum height: 52 mm Minimum length: 150 mm Feed speed: 10 – 14 m/min Working height: 880 mm MACHINE DETAILS Processing units Jointing unit with 2 HF motors, 1.5 kW Double end trimming unit with 2 HF motors, 0.3 kW Flush milling unit with 2 HF motors, 0.7 kW Fine chamfer milling unit with 2 HF motors, 0.3 kW Fine radius milling unit with 2 HF motors, 0.3 kW Corner rounding unit with 2 motors, 0.35 kW Scraper unit for plastic edges Dimensions & weight Machine dimensions (L x W x H): 6,120 x 840 x 1,385 mm Machine weight: 3,000 kg Operating voltage: 400 V, 50 Hz Prsdpfx Asxa Acrsfwjd Total connected load: 12 kW Electrical connection: 3 x 400 V, 5 x 6 mm², fuse 35 A EQUIPMENT Double roller top pressure with electronic positioning Automatic roll magazine for rolls up to 800 mm diameter with pneumatic cut-off unit for up to 3 mm thick material Automatic edge magazine with optical monitoring for strip edges in fixed lengths Infeed fence with automatic positioning when entering jointing value CM - CombiMelt - gluing system in modular design Control system via 7-inch TFT color touchscreen display 100 freely programmable work programs, alphanumeric storage PLC for high-resolution track control Individual inverters for separate activation of processing motors Hole detection for bypassing CNC machining operations Network capability for data integration

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007134, Taikomo krašto tipas: plonas kraštas, storas kraštas, masyvi mediena Klijavimo sistema: EVA, karštas oras Sujungimo frezavimas: taip Daugiafunkcis agregatas: taip Viršutinis frezavimo agregatas: taip Predpfx Afjt Hmtzewed Maks. padavimo greitis: 25 m/min Maksimali plokštės storis: 60 mm Darbo agregatų skaičius: 10 vnt.

Sąlyga: naudotas, Gamybos metai: 2002, Mašinos ilgis: 6240 mm Svoris: 2400 kg Prisijungimo galia: 14 kW Ištraukimo skersmuo: 120 / 140 mm Sandėliavimo vieta: Nattheimas Podpfxevvkfwj Afwerd

Sąlyga: naudotas, Gamybos metai: 1986, from model making shop used, top condition, low running hours Make: Panhans Model: 325 Year of manufacture: 1986 GS-tested Motor: 4.0 kW Control panel on top Planing width approx. 510 mm Infeed table length approx. 1600 mm Outfeed table length approx. 1150 mm Auxiliary fence Slotted/low-noise table lips Number of knives: 4 Knife system: strip planing knives Chip thickness indicator Hollow-chamfer joint Automatic brake Hollow-chamfer joint adjustment Extraction port D 140 mm Space requirement approx. 2800 mm x 800 mm x 1200 mm Weight approx. 800 kg Location: 97447 Gerolzhofen, free loaded onto truck, unpacked Psdpfx Aowhqw Njfwerd Delivery as is, as inspected, without guarantee or warranty