Juostinis transporteris Juostinis transporteris Juostinis transporteris

Lippert 3150-900-700

Būklė: naudotas, Lippert Belt Conveyor Belt Band Conveyor GF 3150-900-700 RA2113 Technical Specifications: Conveyor length (NL): 3150 mm Frame width (NB): 900 mm Belt width (GuB): 700 mm Overall height (BH): 120 mm Support legs: optionally available Conveying speed (v m/s): Please contact us and we will endeavor to meet your preferred conveying speed Drive unit: SEW gear motor Electrical data: 50Hz V380-500, kW 0.55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optional equipment available: Supports Single-sided or double-sided side guide Frequency inverter for stepless speed control Customizable length (longer/shorter) All prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional consultation, please feel free to contact us. Simply reach us by phone or email. We are happy to assist you with the planning and implementation of your projects. Lodpfx Aopdv Rfegfshd We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact partner for intralogistics

Gamybos metai: 2023, būklė: naujas, Maximum chipping height: mm 200 Feed width: mm 500 Feed rollers: pcs. 3 Rotor diameter: mm 600 Chipping length approx.: mm 20–30 Output capacity: 16–20 rm/h wood chips Chipping knives: pcs. 2 Feed motors: kW 2x2.2 Net weight approx.: kg 4100 Feed: horizontal Machine frame: steel, shielded gas welded Rotor: steel, shielded gas welded, dynamically balanced Bearing: Oversized roller bearings Bearing housing: steel flange housings Feed rollers: steel, specially toothed Chip discharge: below the machine Lodpfxoncd Aze Agfohd Screen: (sieve) for re-shredding overlength material Drive pulley: matched to main motor N=1500 min-1 Hydraulic system: consisting of hydraulic pump, membrane accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Būklė: naujas, Gamybos metai: 2026, Drum Chipper Series ATH 300 S&F chipping machines and drum chippers with horizontal feed are used in various sectors of the wood processing industry (sawmills, wood mills). Chippers of the "ATH" series produce high-quality and homogeneous wood chips from residual wood with a low proportion of fines, for example as quality wood chips for the pulp industry or as fuel chips for energy production. Series ATH 300 - Infeed height: 300 mm - Infeed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pcs - Number of counter knives: 2 pcs - Rotor diameter: 700 mm - Number of infeed rollers: 3 pcs - Throughput capacity: up to approx. 70 stacked cubic meters/h * Lsdjuz Hmxepfx Agfohd - Chip length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Infeed roller drive power: 2 x 3.0 kW - Operating / control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chip length, main motor kW, number of knives, and material feed Advantages: - Maximum throughput - Minimal fines content - Low maintenance - Versatile application - Custom manufacturing Need further information? Contact us! We’ll be happy to advise you. Drum Chipper | Wood Chipper | Chipper | Chipping Machine | Wood Chipping Machine | Shredder | Wood Crusher

Būklė: naujas, Gamybos metai: 2025, Variklio galia 7,5 kW Ljdpfx Ajltmi Ssgfehd - Pjovimo jėga 30 t Pjovimo kanalas pritaikytas - maks. rulono ilgis 1500 mm - maks. rulono diametras 1250 mm - Mašinos svoris apie 3800 kg - Rezervuaro talpa apie 110 litrų - Rankų apsauginė grotelė valdymo pulte ir priešingoje pusėje - Peilio užraktas - Tiesaus tipo skėlimo stalas - Dokumentacija 2 egz. vokiečių kalba (1x raštu, 1x USB) - Spalva RAL 5012 – šviesiai mėlyna Apsauginės grotelės/peilio sija RAL 1028 melioninė geltona Mašina sandėlyje – iš karto prieinama Kaina ir daugiau informacijos – pagal užklausą

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) Lodsmhh Dzepfx Agfshd - Delivery time approx. 1 week - No damaged parts! - Spare parts available at any time and system can be expanded - Larger quantities available: approx. 40 uprights in stock Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Professional telephone support - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance delivery notification. The material is packed in a way that allows easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level and dowel-able, and able to support the applied loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least 500 mm of overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 1 500 h, Funkcionalumas: visiškai funkcionalus, Votecs shredder, as new, available at a favorable price. Main motor output: 45 kW. Comparable to Weima or Rainbold. Lodpfx Aovv H Afsgfehd

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm, with base section, 1,200 mm useful depth - 12 cantilever arms, standard, 1,200 mm useful depth - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) Lhjdpfx Aomhhx Isgfod - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts re-orderable and expansion possible at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface: hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length: 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical way to enable easy unloading. When installed outdoors, the stated load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, and suitable for anchor bolts, and must be able to bear the applied loads. The floor structure, load-bearing capacity, and any necessary official approvals must be checked and provided by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German statutory accident insurance (BG) guidelines, it is recommended that the racking uprights have at least 500 mm of clearance above the top storage level.

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, vynų diametras: 50 mm, ritinio plotis: 50 mm, ridenimas tangavimas: 180 mm, bendras plotis: 365 mm, bendras aukštis: 75 mm, bendras ilgis: 2 970 mm, pervežimo ilgis: 2 970 mm, statybos plotis: 365 mm, statybinis aukštis: 75 mm, TAF prekės numeris: 1000003840 Tipas: Ritinėlių konvejeris Gamintojas: nežinomas Pagaminimo metai: nežinomi Bendri matmenys: apie 2.970 x 365 x 75 mm (Ilg x Pl x Aukšt) Šoninės sijos plotis: 365 mm Šoninės sijos aukštis: 70 mm Transportavimo ilgis: 2.970 mm Transportavimo plotis: 30 mm Ritinių tipas: plienas Ritinių skaičius ašyje: 1 vnt. Ritinių atstumas: 180 mm Ritinių diametras: 50 mm Pavara: gravitacinė Būklė: naudotas / pilnai veikiantis Ljdpfx Ajrbgr Esgfjhd Funkcijos testas: OK