Automatinė purškimo mašina

Leif & Lorentz B3 800

Būklė: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW - Fully adjustable heads - Electrically adjustable height and planing width Rcedjrigxyopfx Adzjb - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, pjovimo aukštis (maks.): 400 mm, juostinio pjūklo ilgas: 5 550 mm, pjūklo juostos plotis: 80 mm, stalo ilgis: 800 mm, stalo plotis: 1 060 mm, darbinio aukščio: 400 mm, - itališkos gamybos - lamelių pjovimo juostinis staklės - nedažytas - labai gera būklė - naudotas pjūklas Pjūklas: - ratų skersmuo: 800 mm - didžiausias pjūklo plotis: 80 mm - didžiausias pjovimo aukštis: 400 mm - pagrindinis variklis: 11 kW - pastūmos greičio diapazonas: 2–40 m/min - pastūma su pneumatiniu spaudimu prie kreiptuvo - įvado metalinis slystantis volelis - pjūklo ilgis: 5550 mm - juostos atstumas nuo korpuso: 780 mm - sraigtinis juostos įtempimas - stalo matmenys: 1060x800 mm - darbinis stalas pasviręs 15° kampu - ištraukimo angos skersmuo: 120 mm - pjūklo drėkinimo sistema - kojinis stabdis Rcjdpew H Rq Hjfx Adzsb - lieti ratlankiai - žvaigždės / trikampio paleidimas - maitinimas: 380V - matmenys ilgis/plotis/aukštis: 1600x1100x2400 mm - svoris: 860 kg Pastūma: - metalinis dantytas traukimo volelis - penki pastūmos greičiai su keitimu diržu - volelio aukštis: 30 mm - pastūmos variklis: 0,75 kW - spaudimas

Būklė: naudotas, Gamybos metai: 2009, Ištraukimo skersmuo: 250 mm Nominalus oro srautas: 3534 m³/h Filtravimo plotas: 22,6 m² Variklis: 5,5 kW Briketavimas: Pralaidumas apie: 30 kg/h Briketo skersmuo: 65 mm Variklis: 3,0 kW Redpfx Adjyym A Sozocb Sandėlio vieta: Nattheim

Gamybos metai: 2001, būklė: beveik kaip naujas (naudotas), Double-belt sander, two lower sanding heads, each with a main motor of 2 x 7.5 kW, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished. The conveyor belt is in very good condition. The graphite shoe is new. The machine features two lower units: the first is a rubber contact roller, and the second is a combination unit with a graphite shoe. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation system. Pneumatic belt tensioning. Sanding belt speed is 18 m/s. Conveyor belt feed speed is 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Rated total power: 21 kW. Maximum workpiece height: 160 mm. The machine is equipped with two lower working rollers. The conveyor belt operates from above. Rcodpfx Adefxpbmjzsb

Būklė: labai geros būklės (naudotas), Apatinės veleno frezavimo staklės SCM T150 Rjdpfxsw Ral Ho Adzjcb Veleno skersmuo: 35 mm Bendras veleno ilgis: 180 mm Elektrinis veleno pakėlimas Elektrinis liniuotės judėjimas Elektriškai reguliuojamas kampas -10/45° Kintamas veleno greitis: 3000-4500-6000–7000-10000 aps./min Variklio galia 5,5 kW DTR techninė dokumentacija

Būklė: labai geros būklės (naudotas), Self-loading press for laminated wood Orma LS/ECO/CA 30/13 Working length: 3000 mm Working width: 1300 mm Rodpfjv Nhx Uex Adzocb Automatic material loading Glue application system Shelves heated by oil up to 130°C Upper pressure force: 57 t Side pressure force: 9 t Year of manufacture: 2001 CE certificate

Gamybos metai: 1999, būklė: naudotas, mašinos/transporto priemonės numeris: 942, - Gamintojas: Fladder - Tipas: Gyro 300 VAC Ex - Darbinis plotis: 1300 mm - Gamybos metai: 1999 - Šepečių galvučių kiekis: 6 vnt. - Sukamasis ir osciliuojantis šlifavimo agregatas - 2 vakuuminiai ventiliatoriai - Variklio galia: 7,5 kW - Su vakuuminiu konvejeriu - Elektros jungtis valdymo spinta 1, įrenginys: 10kW - Elektros jungtis valdymo spinta 2, vakuuminis ventiliatorius: 15kW - Pašara greitis reguliuojamas be žingsnių 2 - 10 m/min - Ilgis: 2070 mm - Plotis: 2370 mm - Aukštis: 2240 mm - Svoris: 2300 kg - Atskirai stovinti valdymo spinta, Matmenys: plotis: 800 mm, gylis: 400 mm, aukštis: 1700 mm - Lokacija: sandėlyje - Įtampa, dažnis: 400 V / 50 Hz Rcodjvvl H Njpfx Adzjb

Būklė: naudotas, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture: 2017 Thermal treatment plant / thermo-chamber for wood modification The WTT thermo-chamber is a facility for the thermal modification of wood. It enables efficient processing of 2 to 3 batches per day, depending on the thickness and type of wood. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler unit using thermal oil as the heat transfer medium. Technical details: Capacity: 5,950 - 9,900 m³ timber per year (based on 330 working days) Effective volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main components: 1. Autoclave for thermal treatment 2. Vacuum system to evacuate the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and cooling system: Heat exchangers: 8 units (4 per side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, heated only) Control and operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 x PT100 temperature sensors 2 x mechanical thermometers 1 x vacuum/pressure transmitter 1 x mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for easy trolley movement Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Functional description: 1. Loading the autoclave with wood 2. Creating pre-vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalisation 8. Creating post-vacuum / drying 9. Pressure equalisation 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of a customer, ex location near 5020 Salzburg (Austria), without dismantling, transport, or installation Redov Si Szjpfx Adzecb Dismantling, loading, and transport by us available on request Errors in description and price reserved To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as-is Technical information, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; it applies: "purchased as inspected" Pictures and videos serve as samples and do not reflect the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Kompletná lakovacia linka na parkety Výrobca - SORBINI/ VIET Rok výroby - 2001 Rcjdpfsrdgrvex Adzob Kapacita - 800 m²/smena Doba jedného cyklu - 8 minút Dĺžka linky - 42 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 1996, Wide Belt Sander OTT ALPHA 110 - Machine in stock - After technical inspection - In very good condition - German production - Year of manufacture: 1996 - Segmental pad – ideal solution for lacquer / veneer TECHNICAL SPECIFICATIONS: - Working width: 1100 mm - Working height: 1-150 mm - Combination unit with membrane sanding pad, task-controlled - Main unit motor power: 11 kW - Air blow on sanding belt - Pneumatic belt oscillation - Two belt speeds: 4.5 and 18 m/s - Felt roller unit - Motor power: 0.75 kW - Roller oscillation - Cleaning brush unit - Motor power: 0.75 kW Rcsdsgi Dryopfx Adzsb - Continuously adjustable feed - Feed speed range: 4-18 m/min - Feed drive motor power: 1.5 kW - Electric height adjustment - Vacuum table - Fan motor power: 3 kW - Extraction ports diameter: 4 x 120 mm, 1 x 150 mm Transport dimensions: - Length: 200 cm - Width: 245 cm - Height: 210 cm - Weight: 2500 kg 1. Alpha Combi Unit is a sanding unit with a 150 mm diameter contact roller, 90 shore hardness. Integrated with a sectional pneumatic pad, section width: 27 mm. 2. EMS 27 Optical System – detects minimal irregularities and adjusts the pressure of each pad section to the corresponding area of the workpiece. 3. Control of respective adjacent pad sections is possible within the range -2 to +4.