"Leadermac" keturkampės obliavimo staklės

Leadermac LMC 523 Smartmac

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 092323, X ašies padavimo greitis: 24 m/min, darbinis plotis: 230 mm, ašies skersmuo: 40 mm, darbinio aukščio: 125 mm, ašies skaičius: 5, TECHNINĖ INFORMACIJA Darbinis plotis: 230 mm Darbinis aukštis: 125 mm Veleno skersmuo: 40 mm Padavimo stalas: 2.000 mm Padavimo greitis: 24 m/min Padavimo variklio galia: 3 kW Minimalus ruošinio ilgis: 400 mm Velenai Velenų skaičius: 5 Apatinio horizontalaus veleno galia: 7,5 kW Dešiniojo veleno galia: 5,5 kW Kairiojo veleno galia: 5,5 kW Viršutinio horizontalaus veleno galia: 7,5 kW Antrojo apatinio horizontalaus veleno galia: 7,5 kW ĮRENGINIO INFORMACIJA Matmenys ir svoris Matmenys (I x P x A): 370 cm x 200 cm x 190 cm Svoris: 3.500 kg Elektriniai duomenys Įtampa: 380 V Dažnis: 50 Hz Fazės: 3 ĮRANGA Reguliuojamas padavimo greitis be laiptelių Elektroninis aukščio reguliavimas Elektroninis kairiojo galvos reguliavimas Padavimas per kardano velenus Penki viršutiniai plieniniai volai Du viršutiniai gumuoti traukos volai Stalviršyje integruotas volas Pneumatinis ruošinio spaudimas Lhedpfxsxuqm Uo Ah Iop Chromuoti stalai CE ženklinimas

Sąlyga: naujas, Gamybos metai: 2025, 20T Premium Plus Loading Ramp, internal usable width 20 m. TM-GROUP – the best choice on the market. ⭐️ Galvanized load-bearing grating on the upper section of the ramp as well! ⭐️ ✅ Specification: - Manufacturer: TM-GROUP - Maximum load capacity: 20 tons - Internal ramp width: 2000 cm - PREMIUM PLUS variant – galvanized grating also on the upper part of the ramp (highlighted in red in one of the last photos) - ELECTRIC and manual ramp height adjustment from 1 m to 1.6 m - Galvanized drive-on grating - Reinforced side guardrails on both sides of the ramp - Solid rubber transport wheels - Central ramp handle for maneuvering with a forklift - Adjustable angle and height of the ramp flap - Both-side, reinforced ramp supports - Moving ramp components equipped with grease fittings - Ramp also equipped with a winch ✅ Drive-on Grating: - Galvanized grating with anti-slip grooves. Secure and safe surface. Both forklifts and pedestrian traffic are ensured maximum grip and stability. Competitors usually offer ramps where the drive-on is made of sheet metal with mesh overlay. Our product features a grooved grating, a much more durable solution that lets dirt from forklift wheels fall through and keeps the ramp clean and slip-resistant. ✅ Forklift holder – can be installed on either side: - Convenient and fast mounting for a forklift enables moving the ramp in all directions. Specially designed handle allows maneuvering even in confined spaces. ✅ Chain for attachment to a truck, railway wagon, or fixed dock: - A solid steel chain provides additional securing, preventing any ramp movement during loading operations. Ledpowb A Elsfx Ah Ishp ✅ Heavy-duty side barriers: - Safety railing that can be unscrewed to allow installation of a frame/awning (awning optional). ✅ Electric ramp height control: - Smooth electro-hydraulic drive with high-quality pump. The pump requires 230V (standard socket operation). ✅ Double-acting hand pump: - Hydraulic manual pump for height adjustment in case electro-hydraulic power is unavailable – dual-direction lifting. This solution ensures operation in all conditions. ⭐️ Available variants: ⭐️ - Drive-on width: 1700 mm, 2000 mm, and 2500 mm in Standard, Premium, and Premium Plus versions - Mobile ramps with load capacities of 10, 15, 20, and 25 tons - Grating thickness for drive-on surface: 3–5 cm - Colors: red, blue, black, and green (custom colors available on request) - Mobile ramp with tarpaulin covering As a manufacturer, we offer ramps tailored to individual requirements – custom dimensions, load ratings, and options. Looking for a bespoke solution not found among our listings? Contact our specialist. Tags: Dock ramp, unloading ramp, loading ramp, mobile dock ramp, loading dock, mobile loading dock ramp, mobile loading ramp.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0803024, obliavimo aukštis: 130 mm, ašies skersmuo: 50 mm, obliavimo plotis: 230 mm, veleno greitis (maks.): 6 000 aps./min, The machine will be provided free loaded. TECHNICAL DETAILS Max. workpiece dimensions: 130 x 230 mm Thickness: 10 to 130 mm Widths: 15 to 230 mm Minimum length (single piece): 600 mm Minimum length (with use of universal lantern): 760 mm Maximum cutting depth: 10 mm Spindle speed: 6,000 rpm Spindle diameter: 50 mm MACHINE DETAILS Lsdexa Dzijpfx Ah Iohp Dimensions & Weight Operating dimensions (W x H): 3,000 x 2,250 mm Dimensions: 5,100 x 2,000 x 1,810 mm Weight: 4,300 kg General power supply: 400 V, three-phase + N, 50 Hz Installed power: 53 kW Current draw: 95.6 A EQUIPMENT Five tool holders with reinforced motors 3.00 m chrome table Sound-insulated and secured covers with gas struts Digital counters (Siko type) for precise manual adjustment Raised, operator-side control panel Cast iron infeed table (L x W): 2,980 x 255 mm Spring-loaded side feed device Digital cutting depth indicators Five spindles with detailed power distribution Pneumatic pressure rollers Soft and drawn steel rollers Smooth steel outfeed roller Overhauled and installed knives Operating manual List of spare parts and wiring diagrams

Sąlyga: naudotas, Number of spindles: 6 pcs. Working width: 240 mm Planing height: 200 mm Surface table length: 2500 mm Feed motor: 4 kW Feed speed: 6-36 m/min Dimensions (L x W x H): 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31, also suitable for window production ----- The machine has been cleaned and functionally tested! Technical data: ----- Maximum working width: 240 mm Maximum working height: 200 mm Feed: 6 to 36 m/min 1st spindle Lhodovnv Uzepfx Ah Isp ----- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd HSK tool holder ----- First right tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3rd HSK tool holder ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Additional technical features: ----- 2 feed units after the upper spindles to reduce the axle spacing from 620 mm to 450 mm Air-cushion lubrication on the worktable 2 x milling units with belt drive and quick-change HSK 85 system in positions 2 – 3 Working height of 200 mm instead of 120 mm 5 x electronic horizontal positioning positions (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning positions (2 – 3 – 5 – 6) 3 x electronic tool diameter setting (setup) positions (3 – 4 – 5) Mobile 10 control PRL equipment for cutting out the glazing bead on 2nd upper horizontal spindle Machine is supplied without processing tools (Technical data according to manufacturer's information—no guarantee!)

Sąlyga: beveik kaip naujas (naudotas), Double-shaft multirip saw A. COSTA PUMA 2/50 350/160 Lodpfx Aheqy E Rls Iohp – Italian manufacture TECHNICAL PARAMETERS: cutting width: 350 mm cutting height: 160 mm motors: 37 and 45 kW feed motor: 3 kW lower shaft width adjustment maximum blade diameter: 280 mm spindle diameter: 2 x 60 mm sleeve diameter: 2 x 80 mm track width: 350 mm total power: 85 kW two feed speeds: 15 and 22 m/min central lubrication minimum workpiece length: 600 mm electric height adjustment top and bottom shaft height adjustment six upper pressure rollers mechanical roller pressure town anti-kickback pawls cast iron frame extraction port diameter: 2 x 220 mm spindle speed: 4500 RPM machine dimensions (L/W/H): 250 / 235 / 210 cm weight: ~ 5000 kg

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Krimptunnel / foliewikkelaar Merk: Kallfass Type: semi-/automatische krimptunnel Model: Combimatic 600 Frame: gelakt staal Verpakkingsbereik: max. pakket (B x L x H) = 600 x 380 x 400 mm Capaciteit: max. 600 verpakkingen/min Afmetingen: (L x B x H) = 4.200 x 1.550 x 2.000 mm Gewicht: 850 kg Stroomvoorziening: 380 Volt – 50Hz – 23,5 kW Voorzieningen: Lhedpog D Nyhjfx Ah Isp - mobiel - watergekoelde lasbalk - automatisch / semi-automatisch - 2-handbediening Opmerking: verkeert in uitstekende staat

Sąlyga: geras (naudotas), Gamybos metai: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating principle Processing of timber for chalet construction / log house production. Beams can be processed in a single pass. • Cross-cutting • Horizontal and vertical milling of notches/grooves in a single clamping • Drilling • Milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Rugged welded steel construction. Machine (horizontal and vertical milling units) equipped with 4 special milling motors, hardened and ground guides for maximum processing accuracy. Carriage guided by dust-protected, preloaded ball bearing guide rollers. Working range up to 200 x 250 mm. Fully operational, with contactor control system; motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for customer-provided chip extraction system; includes 2 eccentric clamps; no milling tools (rebate cutter). Features electro-hydropneumatic horizontal and vertical feed, synchronized with the start of the milling motors. Rapid traverse and feed rate steplessly adjustable. Fully wired and installed, including air service unit. Beams thicker than 14 cm must be processed in two passes; for these beams, the workpiece must be fed again to the extent of the excess thickness for further milling. Machine guards over all moving parts with gas spring counterbalance. Lsdpfju Uh T Dox Ah Iehp Machine description / equipped with: 1. Saw unit: Manual feed Spindle adjustment with analog scale display Max. saw blade Ø / bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (uni-directional) Adjustable riving knife Motor speed min⁻¹: 2900 Power (kW): 2.2 2. CM milling unit (log house unit): Hydropneumatic feed Spindle adjustment with digital scale display Horizontal milling unit: Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter width >60 mm only use aluminum alloy cutters with indexable inserts. 2 x hydropneumatic feed motors, each 2.2 kW Hydropneumatic feed; rapid traverse and working feed rate steplessly adjustable. 3. Drilling unit: Manual feed Spindle adjustment with analog scale display Drill chuck: ER 25 collet Max. clamp Ø: 16 mm Max. drill Ø: 32 mm Motor speed min⁻¹: 1450, Power (kW): 1.8 4. End milling unit: Hydropneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor min⁻¹/2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics Required operating pressure min/max. MPa (bar): 0.7/1 (7/10) Air consumption: 8 Nm3/h Electrics Operating voltage V/Hz: 380 V, 50 Hz Rated power: 8.8 – 15.8 kW depending on configuration Customer-supplied fuse: 3 x 25 A (slow-blow) Max. simultaneous power demand: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Total height, guard lowered: 1600 mm Total height, guard raised: 2200 mm Extraction port Ø (under-floor extraction) Weight: approx. 1300 kg Including roller conveyor 2 x 6 m (2 x 4 m) Technical data subject to change!

Sąlyga: naujas, Gamybos metai: 2025, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, individually adjustable 1st brush: Scotch Brite Medium / Diameter 220 mm, variable speed drive 2nd brush: Scotch Brite Hard / Diameter 220 mm, variable speed drive Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 3 kW / both with variable speed drive (infinitely adjustable) Lhodpji Hpk Usfx Ah Iep Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Sąlyga: geras (naudotas), Four-side planer Weinig Unimat 23 Lamella Machine 9 spindles, grooved bed Working width: 230 mm, Lhodpepq T Rbsfx Ah Ijp Working height: 170 mm, Spindle diameter: 40 mm, Feed: 5.5 kW / 6 – 36 m/min, Spindle configuration: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (5.5 kW) 4-Right (5.5 kW) 5-Top (11 kW) 6-Bottom (5.5 kW) 7-Top (7.5 kW) 8-Bottom (37 kW) 9-Universal (11 kW) 5 powered feed rollers in table

Gamybos metai: 1998, Sąlyga: geras (naudotas), I am selling a dowel drilling machine with dowel insertion unit KOCH Sprint-PTP Year of manufacture: 1998 Number of dowel spindles: 1 Number of insertion heads: 1 Programmable CNC-controlled motorized Z-axis Working width: 1200 mm Lodpfxsd Exwgs Ah Ishp Maximum working height: 36 mm Available for immediate sale