Platus keturių pusių obliavimo staklės

KUPFERMUHLE 60 na 6 głowic do mokrego drewna

Sąlyga: naudotas, Number of spindles: 6 pcs. Working width: 240 mm Planing height: 200 mm Surface table length: 2500 mm Feed motor: 4 kW Feed speed: 6-36 m/min Dimensions (L x W x H): 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31, also suitable for window production ----- The machine has been cleaned and functionally tested! Technical data: ----- Maximum working width: 240 mm Maximum working height: 200 mm Feed: 6 to 36 m/min 1st spindle ----- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Kjdpfx Agevnv Uzs Aend Speed: 6,000 rpm 2nd HSK tool holder ----- First right tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3rd HSK tool holder ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Additional technical features: ----- 2 feed units after the upper spindles to reduce the axle spacing from 620 mm to 450 mm Air-cushion lubrication on the worktable 2 x milling units with belt drive and quick-change HSK 85 system in positions 2 – 3 Working height of 200 mm instead of 120 mm 5 x electronic horizontal positioning positions (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning positions (2 – 3 – 5 – 6) 3 x electronic tool diameter setting (setup) positions (3 – 4 – 5) Mobile 10 control PRL equipment for cutting out the glazing bead on 2nd upper horizontal spindle Machine is supplied without processing tools (Technical data according to manufacturer's information—no guarantee!)

Sąlyga: geras (naudotas), Gamybos metai: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating principle Processing of timber for chalet construction / log house production. Beams can be processed in a single pass. • Cross-cutting • Horizontal and vertical milling of notches/grooves in a single clamping • Drilling • Milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Rugged welded steel construction. Machine (horizontal and vertical milling units) equipped with 4 special milling motors, hardened and ground guides for maximum processing accuracy. Carriage guided by dust-protected, preloaded ball bearing guide rollers. Working range up to 200 x 250 mm. Fully operational, with contactor control system; motors protected by thermal relays. Kodou Uh T Dopfx Ag Asnd Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for customer-provided chip extraction system; includes 2 eccentric clamps; no milling tools (rebate cutter). Features electro-hydropneumatic horizontal and vertical feed, synchronized with the start of the milling motors. Rapid traverse and feed rate steplessly adjustable. Fully wired and installed, including air service unit. Beams thicker than 14 cm must be processed in two passes; for these beams, the workpiece must be fed again to the extent of the excess thickness for further milling. Machine guards over all moving parts with gas spring counterbalance. Machine description / equipped with: 1. Saw unit: Manual feed Spindle adjustment with analog scale display Max. saw blade Ø / bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (uni-directional) Adjustable riving knife Motor speed min⁻¹: 2900 Power (kW): 2.2 2. CM milling unit (log house unit): Hydropneumatic feed Spindle adjustment with digital scale display Horizontal milling unit: Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter width >60 mm only use aluminum alloy cutters with indexable inserts. 2 x hydropneumatic feed motors, each 2.2 kW Hydropneumatic feed; rapid traverse and working feed rate steplessly adjustable. 3. Drilling unit: Manual feed Spindle adjustment with analog scale display Drill chuck: ER 25 collet Max. clamp Ø: 16 mm Max. drill Ø: 32 mm Motor speed min⁻¹: 1450, Power (kW): 1.8 4. End milling unit: Hydropneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor min⁻¹/2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics Required operating pressure min/max. MPa (bar): 0.7/1 (7/10) Air consumption: 8 Nm3/h Electrics Operating voltage V/Hz: 380 V, 50 Hz Rated power: 8.8 – 15.8 kW depending on configuration Customer-supplied fuse: 3 x 25 A (slow-blow) Max. simultaneous power demand: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Total height, guard lowered: 1600 mm Total height, guard raised: 2200 mm Extraction port Ø (under-floor extraction) Weight: approx. 1300 kg Including roller conveyor 2 x 6 m (2 x 4 m) Technical data subject to change!

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2021, Working width: 520 mm Cutterhead: Tersa Number of knives: 4 Jointer table length: 2720 mm Jointer table adjustment: Lever Concave/convex joint adjustment: No Display for chip removal: Scale Display for concave/convex jointing: - Adjustable fence angle: Yes Motor power: 7 kW Kodogr Udvspfx Ag Asnd Machine length: 2800 mm Machine width: 1000 mm Weight: 870 kg

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, darbinis plotis: 260 mm, obliavimo aukštis: 170 mm, ašies skersmuo: 40 mm, obliavimo plotis: 260 mm, darbinio aukščio: 170 mm, padavimo variklio galia: 4 000 W, veleno greitis (maks.): 6 000 aps./min, veleno greitis (min.): 6 000 aps./min, aukščio reguliavimo tipas: elektrinis, ašies skaičius: 5, įėjimo dažnis: 50 Hz, Įranga: kabina, variklio stabdis, Weinig Profimat 23 E Ksdpfovgnb Rsx Ag Aend Darbinis plotis: 260 mm, Darbinis aukštis: 170 mm, 5 velenai, Veleno skersmuo: 40 mm, Velenų išdėstymas: 1- Apačia – 5,5 kW 2- Dešinė + 3- Kairė – 11 kW 4- Viršus – 5,5 kW 5- Apačia – 11 kW Padavimo greitis: 6 – 24 m/min - 4 kW Oro pagalvė stalo viduje Viena varoma ritinėlis išėjimo stalo dalyje. Su įrankiais.

Sąlyga: naudotas, Four-sided planer REX, planing width 51 cm, maximum planing height 20 cm, 2 feed speeds, vertical spindles with 2 rotational speeds, electric table lifting device. Kodpfx Agjrxf Smo Aend

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: H4370, Connected load: 380V, 6.8kW, 12A Knedpoq Abnkjfx Ag Ajd with sliding table 1100 mm Table size: 1100 x 900 mm Height adjustment via hand crank Integral fence jaws Stops individually adjustable via SIKO counter Aigner cutter guard Extraction ports: 1x120 mm, 1x150 mm Speeds: 2900/4400/6000/8000/10000 rpm.

Sąlyga: naudotas, Gamybos metai: 2017, Number of spindles: 5 units Working width: 240 mm Planing height: 120 mm Surfacing table length: 2500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Weight approx.: 3,500 kg Control: SCM Control 10 SCM Superset NT with workpiece return ----- Machine fully inspected. Knodpfxjwwl Nlo Ag Aod Summary: ----- - 5 spindles - Powerful motors - Left and top spindles controlled for width and height - With return system for workpieces to the operator 1st spindle ----- First lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system 3rd spindle ----- First left vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic horizontal positioning / motorised width adjustment 4th spindle ----- First top horizontal spindle Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic radial positioning / motorised height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm SCM Control 10 user interface Including workpiece return system Including used planing heads currently installed. (Technical specifications according to manufacturer – subject to verification!)

Sąlyga: labai geros būklės (naudotas), Weinig Hydromat 23C su 6 velenais. Maksimalus darbinis plotis 245 mm. Maksimalus darbinis storis 160 mm. Atskira elektros skydinė. Atskiras nuotolinio valdymo pultas. Automatinė lovelių tepimo sistema. Pilnai uždaroma garsą slopinanti danga. 15 kW padavimo variklis, 100 m/min. Nr. 1 – 7,5 kW – apatinis velenas, 6000 aps./min., paruoštas tiesiniam obliavimui Ksdjrn Snmspfx Ag Ajnd Nr. 2 – 11 kW – dešinysis velenas, 6000 aps./min., paruoštas tiesiniam ir profilių obliavimui Nr. 3 – 15 kW – kairysis velenas, 6000 aps./min., paruoštas tiesiniam ir profilių obliavimui Nr. 4 – 15 kW – viršutinis velenas, 6000 aps./min., su išorine atrama, paruoštas tiesiniam ir profilių obliavimui Nr. 5 – 30 kW – viršutinis velenas, 6000 aps./min., su išorine atrama, paruoštas tiesiniam ir profilių obliavimui Nr. 6 – 15 kW – apatinis velenas, 6000 aps./min., su išorine atrama, paruoštas tiesiniam ir profilių obliavimui 50 mm velenai. Spindulio pavara 0,55 kW. Pateikiama pilna dokumentacija. Masivi garsą slopinanti danga. Pageidaujant galimas tiekimas su hidro įrankiais. Pageidaujant galimas tiekimas su pilna mechanizacija.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 11470, ruošinio plotis (maks.): 450 mm, Hundegger K2 in very good condition, overhauled, assembled, and commissioned by Hundegger. Since then, it has only run for approximately 20 hours, was professionally dismantled, and has been stored in a heated hall. Kjdpewhpavofx Ag Aend

Sąlyga: labai geros būklės (naudotas), Catalog number 7275 TECHNICAL DATA - Max. planing width: 610 mm - Max. planing height: 200 mm From above: - toothed feed roller Kodpfx Agjrq Db Ds Ajnd - return pawls - 2 pressure rollers - toothed feed roller - pressure roller - planing shaft 610 mm, 4-knife, 7.5 kW - pressure rollers - smooth feed roller From below: - guide rail - adjustable infeed table with smooth, split sliding roller - planing shaft 610 mm, 4-knife, 5.5 kW - 2 smooth sliding feed rollers - side pressure roller From the rear: - side spindles + 2 pressure rollers: 1) right vertical 5.5 kW 2) left vertical 5 kW - Max. planing height on side spindles: 200 mm - Spindle diameter: 35 mm - Spindles adjustable up/down, left/right 3) additional horizontal spindle 160 mm, adjustable up/down, left/right, and angle, approx. 4 kW - Option to plane with the additional spindle from above/below/side - Spindle diameter 35 mm - Adjustable rollers in the lower table - 2 feed speed levels - Feed motor 2.2 kW - Extraction port diameter 120 mm - Dimensions (LxWxH): 2550 x 1700 x 1350 mm - Weight approx. 3000 kg ADVANTAGES - Wide planer for wet and dry wood - Ideal for processing beams, flooring, etc. - 2 horizontal planing shafts + 2 vertical spindles + 1 horizontal spindle - Cutter heads included - Manufactured by German brand KUPFERMUHLE - Used planer, very good condition Original photos Net price: 58,900 PLN Net price: 14,020 EUR (exchange rate: 4.2 EUR) (Prices are subject to change due to exchange rate fluctuations)