Krones Contiform S8, Volumetric ir kt. linija vienkartinėms PET buteliams (2006)

Krones Line for Non-Returnable PET bottles

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, galia: 11 kW (14,96 AG), Ein Dreifach-Pass-Trommeltrockner ist ein industrieller Trockner, der dazu verwendet wird, Feuchtigkeit aus Materialien zu reduzieren oder vollständig zu entfernen. Seinen Namen erhält er von den drei rotierenden Trommeln, durch die das Material hintereinander geführt wird, wobei jede Trommel eine spezifische Funktion im Trocknungsprozess übernimmt. Dieser Trocknertyp wird häufig in der Produktion verschiedenster Schüttgüter eingesetzt, beispielsweise Mineralien, landwirtschaftlichen Produkten und Biomasse. Hier sind die wichtigsten Merkmale und Komponenten eines Dreifach-Pass-Trommeltrockners: 1. Dreifach-Pass-Design: - Das zu trocknende Material durchläuft drei rotierende Trommeln bzw. Zylinder, daher die Bezeichnung „Dreifach-Pass“. Jede Trommel übernimmt einen speziellen Abschnitt im Trocknungsprozess. 2. Materialfluss: - Das Material tritt zuerst in die innerste Trommel ein und wird dort vorgtrocknet. Anschließend gelangt es in die mittlere Trommel und abschließend in die äußere Trommel. Bei jedem Durchgang erfolgt eine weitere Trocknungsstufe. 3. Wärmequelle: - Die notwendige Prozesswärme wird in der Regel von einem Brennersystem oder einem Ofen am Trockneranfang erzeugt. Die heißen Abgase durchströmen die rotierenden Trommeln und übertragen ihre Wärme auf das Material. 4. Luftstrom: - Das Design des Trockners ist auf einen optimierten Luftstrom durch die Trommeln ausgelegt, was eine effiziente Trocknung sicherstellt. Beim Dreifach-Pass-System bewegen sich Material und heiße Gase meist gegenläufig (Gegenstromprinzip), um den Wärmeübergang und die Trocknungsleistung zu maximieren. 5. Mitnehmer oder Lifters: - Im Inneren der Trommeln befinden sich Mitnehmer, welche das Material beim Drehen anheben und durch die Trommel fallen lassen. Diese Bewegung sorgt für eine optimale Durchmischung, einen guten Wärmeaustausch und eine gleichmäßige Trocknung. 6. Verweilzeit: - Durch die Dreifach-Pass-Ausführung erhöht sich die Verweilzeit des Materials im Trocknungssystem deutlich. Somit kann das Material länger der Wärme ausgesetzt werden, was besonders bei Ausgangsmaterialien mit hohem Feuchtigkeitsgehalt die Trocknungseffizienz steigert. 7. Kühlsektion: - Nach dem Durchlaufen aller drei Trommeln kann am Trocknerausgang eine separate Kühlzone installiert sein, um das getrocknete Material vor der Austragung abzukühlen. 8. Einsatzgebiete: - Dreifach-Pass-Trommeltrockner finden in zahlreichen Branchen Anwendung, z.B. in der Landwirtschaft (Trocknung von Getreide), Mineralienaufbereitung (Erz- oder Konzentratstrocknung) sowie bei der Biomasseaufbereitung (Holzspäne, organische Materialien). Cgjdpfeq Nfuzox Ab Tsu 9. Effizienz und Energieverbrauch: - Dreifach-Pass-Trommeltrockner zeichnen sich durch eine hohe Trocknungseffizienz aus, bedingt durch die verlängerte Verweilzeit und den effektiven Wärmeübergang. Sie können jedoch einen höheren Energieverbrauch aufweisen als Einfach- oder Zweifach-Pass-Systeme. Bei der Auswahl eines Dreifach-Pass-Trommeltrockners sollten Faktoren wie das zu trocknende Material, der gewünschte Restfeuchtigkeitsgehalt und die spezifischen Prozessanforderungen berücksichtigt werden. Eine fachgerechte Auslegung und optimale Bedienung sind entscheidend für beste Trocknungsergebnisse. Technische Details: Wir bieten verschiedene Ausführungen für unterschiedliche Anforderungen. Bitte kontaktieren Sie unser Team für weitere Informationen.

Būklė: naudotas, Gamybos metai: 1992, Automatinė PET butelių pūtimo mašina Gamintojas: SIDEL Tipas: SBO 4 S1 Metai: 1992 Našumas: 4 000 (1,5 L / 2 L buteliams) Įdiegta galia: 150 kW Komplekte 1,5 L formos Preformų padavėjas Cgedpowa Rhrofx Ab Tju Techninė būklė: naudota mašina, įsijungia, programa veikia gerai

Būklė: naudotas, Gamybos metai: 2002, Overview  This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and is used for filling carbonated water and soft drinks into 1.5-liter PET bottles. The line has a production capacity of up to 16,000 bottles per hour. It has been regularly maintained and is in good condition. Availability: End of August 2025. Technical data  Output: up to 16,000 bottles per hour (based on 1.5L PET bottles) Formats: 1.5L PET bottles (short-neck and cap) Bottle material: PET Filler type: Isobaric filler Year of manufacture: between 1999 and 2007 (various machines) Closure type: short-neck Label type: OPP (Contiroll) Scope of supply 1 x Stretch Blow Molding Machine CONTIFORM S16 | Krones | 2002 | incl. preform hopper & chiller Air conveyors from the blow molder to the labeler & filler 1 x Labeler CONTIROLL | Krones | 2000 1 x Triblock 77/88/11 MECAFILL isobaric filler | Krones | 2002 | incl. metal detector 1 x Mixer for carbonated water and beverages | ca. 2000 1 x Inkjet printer HITACHI RXS Conveyors between filler and shrink tunnel 1 x Shrink tunnel VARIOPAC | Krones | 2007 | 45 packs/min 1 x Handle applicator TWIN PACK MDE INOX | 2003 | single-lane, 45 packs/min Pack transport to the palletizer 1 x Palletizer KETTNER KR51112 Pressant Universal | 1999 Pallet magazine with lift and transport 1 x Pallet stretch wrapper ROBOPAC GENESIS | 2002 Cgedpswzvl Sjfx Ab Tou

Gamybos metai: 2004, būklė: paruoštas naudoti (naudotas),

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, konteinerio ilgis: 20 pėda, 🚢 20ft Storage Container – Like New (Year of Manufacture 2025 / 2026) – Available Immediately! High-quality sea container in near-new condition – perfect for use as storage space, workshop, site container, or for professional transport. ⭐ Your Benefits at a Glance 🆕 Year of manufacture 2025 / 2026 – like new 💪 Very robust steel construction (2 mm wall thickness) 🌧️ Wind & watertight 🔐 Securely lockable with 4-point door locking system 🚚 Supplied with CSC plate – suitable for worldwide transport 🌬️ Equipped with ventilation to prevent moisture 🪵 Premium-quality wooden floor 🛠️ Forklift pockets integrated in the floor 📏 Dimensions & Technical Data 📐 External dimensions: 6,058 × 2,438 × 2,591 mm Cgedewu Uy Uepfx Ab Tju 📦 Internal dimensions: 5,898 × 2,350 × 2,390 mm 🚪 Door opening width: 2,343 mm 🧱 Volume: approx. 33 m³ ⚖️ Tare weight: approx. 2.25 t 🏋️ Payload: up to 30 t These containers impress with their durability, security, and versatility – ideal for commercial, construction, trade, or demanding private use. 📬 Enquire now – we will provide you with a customised offer! 👀 Further container sizes & variants available. 🚛 Nationwide delivery possible (subject to surcharge).

Gamybos metai: 2018, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, - Nenaudotas - Pilnas komplektas - Galima išbandyti vietoje Našumas: 1 m³/val. 80% (permeato išeiga) Slėgis apie 40 bar Energijos sąnaudos apie 10 kWel Jungtys: nerūdijantis plienas (įvadas), PVC (išvadas) Ilgis: 7000 mm Gylis: 1200 mm Aukštis: 2100 mm Priedai: padavimo siurblys, smėlio filtras (80 µm), du manometrai, daugiaaukštis aukšto slėgio siurblys (40 bar) Cedpfx Abswhlr Io Togu Papildomai galima įsigyti neutralizavimo įrenginį su 1 m³ talpa

Būklė: naudotas, Gamybos metai: 2017, Overview This complete beverage can filling line was manufactured in 2017 by the German producer KHS. The line is designed for beverage production with a capacity of up to 40,000 cans per hour and is in good condition. Technical Data Capacity: 40,000 bottles/hour Product type: carbonated soft drinks and beer Bottle formats: 500ml 211/202 Closure formats: 211/202 Packaging formats: tray with film Application: KEG + beer Condition: good technical condition, dismantled Scope of Supply Can depalletizer | LINKER | DPG-500 | 2012 Can inspection | TransTech | Hysek CanCheck | 2012 Can conveyor | LINKER / KHS | Conveyor RC | 2012 Rinser | LINKER / KHS | Triplex Rinser TR | 2012 Short-time heater | KHS | Innopro 140/14/85 | 2012 Filler | KHS | Innofill Can DVD | 2017 Seamer | Ferrum | F08 | 2012 Lid feeder | NSM | Lidserver A30 | 2017 Conveyor | KHS | Innoline BTR | 2012 Fill level inspection | KHS | Innocheck CUB | 2012 Blow-off station | Europool | - Packaging machine | KHS Kisters | SP0502 | 2012 Pack conveyor | KHS | Innoline GTR | 2012 Handle applicator | KHS | CSM 050-2 | 2012 Packaging machine | KHS | Innopack 035 B2 + FS A-L | 2012 / 2017 Cgodpfx Abjyb R Srs Tsu Palletizer | KHS | Innopal PBL1N1 | 2012 Stretch wrapper | SIAT | MFP | 2017 Pallet conveyor | KHS | Innoline PTR

Būklė: naudotas, mašinos/transporto priemonės numeris: LC600, Technical Specifications and Performance Data This used bottling line is configured for highly efficient beverage production in 0.5L PET bottles. Optimized for both carbonated and still water, the line delivers reliable throughput with robust end-of-line packaging and palletizing. The layout is non-combi, featuring a separate blower upstream of the filling monoblock—ideal for flexible maintenance and line balancing. Production speed: 25,000 bph Bottle formats: Compatible with 0.5L bottle format Containers: Designed for handling PET bottles Configuration: Non-combi (separate blow molding and filling) Main components and year of manufacture: - Sidel Universal SBO 14 Blower (2007) - Sarcmi 70-10 ISO Filling Monoblock (1988 – Fully overhauled 2025) - Sarcmi Labeling Machine (2011) - Zambelli Shrink Packer (2004) - Handle Applicator (2004) - ACMI Twin-head Palletizer (1992) Advanced Automation and Control Systems The line benefits from an upgraded conveyor and control system, with conveyor management and electrical cabinets refurbished in 2010–2011. This upgrade improves module synchronization, enhances safety interlocks, and supports stable, high-speed operation across blow molding, filling, labeling, and packaging. - Overhauled conveyor controls and electrical cabinets in 2010–2011 - Integrated interlocks for safe high-throughput operation - Non-combi architecture simplifies maintenance and phased upgrades Production Line Integration Capability Designed as a complete solution for water bottling, this used bottling equipment integrates seamlessly from the blow molding process to end-of-line palletizing. The non-combi layout allows independent operation and optimization of the blow molder and filling monoblock, making changeovers and maintenance easier without stopping the full line. Inline flow: Blowing → Filling Monoblock → Labeling → Shrink Packing → Handle Application → Palletizing Conveyor system overhauled for reliable accumulation and transfer Suitable for carbonated and still water in PET Machine Condition and Maintenance History This used bottling line has benefitted from targeted improvements to conveyor management and electrical cabinets, implemented in 2010–2011. A key feature is the Sarcmi 70-10 ISO filling monoblock, which, despite its original 1988 manufacture, was fully overhauled in 2025 to ensure maximum operational reliability. The line is described as in working condition and offered as a ready-to-operate used industrial packaging solution. - Sarcmi 70-10 ISO filling monoblock: Overhauled in 2025 Cedpfx Abeyk E Sro Tegu - Conveyor and electrical cabinet management upgraded: 2010–2011 - Branded OEM components throughout the line - Operational with existing 0.5L PET format

Būklė: naujas, Gamybos metai: 2025, Complete sample system for water bottling with a capacity of up to 3,000 cycles/hour. Includes blow molding machine (blow molding machine with 4 blow stations, air drying system, compressed air compressor, cooling), bottle infeed table, automatic rinsing/filling/capping machine, cap feeder, lamp inspection box, drying unit, automatic shrink-labeler, inkjet coder, automatic wrapping machine, and conveyor system. - Production process: Bottle blowing > Bottle rinsing > Bottle filling > Bottle capping > Lamp inspection > Shrink labeling > Heat shrinking > Inkjet coding > Packaging. - Specifications: 3,000 cycles/hour (at 500ml); bottle volume: 350–1,500ml; PET bottles; standard 28/30mm PET closures; 1,500 liters of water bottled per hour; 500 liters of rinsing water consumed per hour; gravity filling; 24 bottles per multipack. The specifications may vary depending on the final layout and the customer-specific combination of machines and modules. Cjdpfev Nla Asx Ab Togu Please note that our new equipment prices are often lower than typical used prices. Feel free to inquire and tell us about your packaging requirements. – We usually have 30–50 different new machines available from stock for immediate delivery. For custom-manufactured machines, we offer very short delivery times starting from approximately 3 weeks. – All machines are available with a full warranty.

Būklė: naudotas, Gamybos metai: 2002, Overview This PET bottling line was manufactured in 2002 by Krones (Germany). The system is designed for carbonated beverages such as beer or soft drinks and is also suitable for still or carbonated water. With an output of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to the modernization of the PET department and replacement with a higher-capacity system. The plant is in good condition and remains fully operational. Technical Data Line capacity: 12,000 bph at 0.5 L 9,000 bph at 1.0 L 8,000 bph at 1.5 L 6,000 bph at 2.0 L Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L Neck finish: PCO 1810 Max. bottle diameter: 106 mm Products: Beer (+4 °C), kvass and soft drinks (+10 °C), still and carbonated water Labelling: Wrap-around labels, pre-cut paper labels, hotmelt Secondary packaging: Film only (4×3 and 3×2) Pallet type: EURO 1200×800 mm Controls: Siemens S7-300 Power supply: 400 V, 3PH, 50 Hz, TN-S Scope of Supply Blow moulder | Krones | Contiform S8 | 2002 | Incl. preform feeding system, chiller, crate tipper Rinser | Krones | Variojet | 2002 | Rotary machine Filler | Krones | Mecafill | 2002 | Rotary filler, isobaric filler for CSD and beer Labeller | Krones | SV 360-10-113 | 2002 | Rotary labeller Labeller | Krones | Canmatic 600-10 | 2002 | Rotary labeller, hotmelt Packaging machine | Krones | Variopac FS-45 | 2002 | Shrink wrapping machine, formats 4×3 / 3×2 Palletizer | Krones | Pressant Compact 1N | 2002 Stretch wrapper | Robopac | Rotoplat | 2002 Air conveyor | Krones | Airco S | 2002 | For blown PET bottles Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles Packaging conveyor | Krones | Multico S | 2002 | For product packaging Pallet conveyor | Krones | — | 2002 | For pallet transport Auxiliary equipment | Krones | — | 2002 | Cap feeding system, hopper, valve manifold Cedpoxhf Hiofx Ab Tjgu