Įpurškimo liejimo mašina

KraussMaffei KM 500/3500 C1

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 504212, spaudimo jėga: 5 000 kN, varžto skersmuo: 90 mm, tarpas tarp stulpų: 900 mm, įpurškimo slėgis: 1 742 juosta, įrengimo aukštis: 480 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping Unit Clamping force: 5,000 kN Distance between tie bars (h x v): 900 x 800 mm Max. mold opening distance: 1,170 mm Min. mold installation height: 480 mm Platen opening stroke: 1,650 mm Ejector stroke: 250 mm Ejector force: 95 kN Ejector force (reverse): 48 kN Injection Unit Screw diameter: 90 mm L/D ratio: 20 Injection pressure: 1,742 bar Injection volume: 1,953 cm³ Shot weight for PS: 1,777 g Injection rate: 649 cm³/s Nozzle contact force: 115 kN Iedsw Dy Rwopfx Abkjbf MACHINE DETAILS Electrical Data Pump connected load: 90 kW Heating capacity: 44 kW Operating voltage: 400 V Frequency: 50 Hz Total rated current (Iₙ): 306 A Motor rated current (Iₙ): 170 A Operating voltage: 3-phase Dimensions & Weight Net weight: 25.8 t Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m Note: Delivery, installation, and commissioning can be arranged upon request for an additional fee.

Gamybos metai: 2016, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, HDPE film washing plant Iedstuui Depfx Abkobf Year of manufacture: 2016 0 operating hours (never put into operation) Manufacturer: NEUE HERBOLD, D-74889 Sinsheim comprising: Wet granulator, type SM 450/600-S5-2 Friction washer / friction separator, type FW 560/3000 Screw conveyor Separation tank (float-sink separation) type TB 500 Mechanical dryer, type TM 1005 Extraction unit, type MFT 55/500 Fine material separator, type HS 500 Electrical control panel

Sąlyga: naudotas, Suspended Crane Runway Crane System DEMAG Type KBK 1 Year of manufacture: approx. 2000 Single-rail suspension track with single-girder bridge crane Light crane system made from KBK modular system profiles Lifting capacity: 125 kg Span: 5 meters Distance between longitudinal tracks: 4.1 meters Total length of longitudinal girder: 12 meters Crossbeam profile = KBK1 Longitudinal track profile = KBK1 Comprising: 29 meters of KBK-1 system profile (4 x 6000 mm + 1 x 5000 mm) 1 trolley for crane suspension 2 double trolleys for the longitudinal tracks 10 clamp brackets for crane suspension or ceiling mounting (without girder clamps) Ibodpfehrkrtjx Abkof 6 end caps suitable for KBK1 running rails

Gamybos metai: 2003, Sąlyga: paruoštas naudoti (naudotas), Seven Arburg injection molding machines are available: 1) Arburg 320C 600-250, Year: 2001, Operating hours: 83,365h, Clamping force: 600kN, Screw diameter: 30mm, Shot weight: 97g, Max. injection pressure: 2470bar, Injection volume: 106cm³, Centering: 125mm/125mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 320mm/320mm, Core pulls: 2, Temperature control units: 6, Machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. Ibedpfx Abjtyyn Hokjf 2) Arburg 420C 1000-250, Year: 2001, Operating hours: 90,769h, Clamping force: 1000kN, Screw diameter: 30mm, Shot weight: 97g, Max. injection pressure: 2470bar, Injection volume: 106cm³, Centering: 125mm/125mm, Max. opening stroke: 750mm, Daylight between platens: 750mm, Platen dimensions X/Y: 570mm/570mm, Tie bar spacing: 420mm/420mm, Core pulls: 2, Machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, Year: 1999, Operating hours: 78,784h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 110mm/110mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 270mm/270mm, Core pulls: 1, Temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, Year: 2000, Operating hours: 78,784h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 125mm/110mm, Max. opening stroke: 350mm, Daylight between platens: 350mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 320mm/320mm, Core pulls: 1, Temperature control units: 6. 5) Arburg 220C 250-60, Year: 2001, Operating hours: 86,595h, Clamping force: 250kN, Screw diameter: 22mm, Shot weight: 27g, Max. injection pressure: 2340bar, Injection volume: 30cm³, Centering: 110mm/110mm, Max. opening stroke: 425mm, Daylight between platens: 425mm, Platen dimensions X/Y: 400mm/400mm, Tie bar spacing: 221mm/221mm, Core pulls: 1, Temperature control units: 6. 6) Arburg 270C 300-100, Year: 2007, Operating hours: 59,885h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 110mm/110mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 270mm/270mm, Core pulls: 2, Temperature control units: 6, Machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, Year: 2001, Operating hours: 57,504h, Clamping force: 250kN, Screw diameter: 18mm/22mm, Shot weight: 18g/27g, Max. injection pressure: 2500bar/2340bar, Injection volume: 20cm³/30cm³, Centering: 110mm/110mm, Max. opening stroke: 425mm, Daylight between platens: 425mm, Platen dimensions X/Y: 400mm/400mm, Tie bar spacing: 221mm/221mm, Core pulls: 1, Temperature control units: 6, Machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. Inspection on site is possible.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Stock no. 2587k 1 used pelletizing line, function tested, Throughput up to approx. 600 kg/h depending on material, consisting of: 1 volumetric dosing unit Extruder Plastmachines type PME 100 Single screw Ø 100 mm – 35 L/D Drive 134 kW – DC 1x degassing zone Melt filter BKG type K-SWE 121 RS – backflush incl. Hydraulics 3 kW Strand die with 20 x Ø 3.5 mm holes Strand cooling tank 400 x 4000 mm with strand guide rollers Ibedpstvfhcjfx Abkjf Strand suction unit Strand pelletizer SG 3000 ResoTec control / control cabinet Inspection by appointment – short notice possible More pelletizing lines / extruders available ex-works Wuppertal & ready for demonstration

Sąlyga: naudotas, Gamybos metai: 2004, Technical Details: Screw diameter: 105 mm Injection weight in polystyrene: 4,727 g/PS Clamping force: 2,300 kN Platen size: 2,830 x 2,400 mm Opening stroke: 3,700 mm Mold installation height: 1,100–1,800 mm Ibedpfxstrbcbj Abkof Shot volume: 5,195 cm³ Max. injection pressure: 2,296 bar Dimensions: 14.2 x 4.15 x 2.84 m Total weight: 143 t Tie bar spacing: 2,000 x 1,600 mm Robot system, core pulls, hot runner controller -    The machine is in very good condition -    Complete additional cutting units available -    Comes with a conveyor belt and robot systems (model 2012)

Gamybos metai: 1996, veikimo valandos: 24 222 h, Sąlyga: geras (naudotas), This injection moulding machine from Dr. Boy is located at Plastima Used Machinery in machine storage. The machine dates from 1996 and has relatively low operating hours for its age. – Brand: Dr. Boy – Model: 80M – Year of manufacture: 1996 – Screw diameter: 42 mm – Shot volume: 200 cm³ – Clamping force: 80T – Operating hours: 24,222 Ibjdpfepwh Akex Abkjf

Gamybos metai: 2003, Sąlyga: paruoštas naudoti (naudotas), Clamping force: 275 t, injection weight: 455 g, cylinder diameter: 55 mm, max. opening stroke: 850 mm, weight: 20 t, operating hours: approx. 63,000 h, including documentation, one set of new pumps and GEIGER LR 16 EC handling unit; the handling unit should be overhauled. Isdpfsiiv Aqox Abkjbf

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1988, Wire diameter: 0.1 – 1.3 mm Cut length: 5 – 70 mm Performance: up to 400 cycles/min Complete with cooling unit Ibedpfs Syv Tsx Abkef and motorized wire spool

Sąlyga: naudotas, Gamybos metai: 2005, Technical details: Screw diameter: 90 mm Ibodpfjtunccjx Abksf Shot weight in polystyrene: 1,758 g/PS Clamping force: 6,500 kN Approx. machine weight: 32 t From serial production