Pūtimo liejimo mašinos

Kosme KSB 4000

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, A SIG Corpoplast blow molding machine is available. Output: 21,600 bottles/hour, bottle formats: 500ml/750ml/1000ml/1500ml, max. blow air pressure: 40 bar, dimensions (L/W/H): approx. 7000mm/4300mm/3100mm, weight: approx. 20,000 kg. Includes Transver AG preform feeder, year of manufacture: 2008, silo, elevator, sorter, and chute. Documentation available. An on-site inspection is possible. Pgodpfx Ast Eu Azspysk

Gamybos metai: 2014, būklė: paruoštas naudoti (naudotas), Clamping force: 600 kN, weight: 9 t, operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Psdpfxjh Nypfo Apyegk

Būklė: naudotas, Gamybos metai: 1998, Automatic PET Bottle Blow Moulding Machine Manufacturer: SIDEL Model: SBO 16/16 S1 Year of manufacture: 1998 Output: 16,000 bph for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Pgsdpfeutni Rjx Apyok Includes 1.5 L bottle moulds Preform feeder Chiller unit Technical condition: used machine, fully operational until disassembly. The machine is currently dismantled, assembled in components, and prepared for transport. Complete and original technical documentation.

Būklė: naudotas, Gamybos metai: 1992, Automatinė PET butelių pūtimo mašina Gamintojas: SIDEL Tipas: SBO 4 S1 Metai: 1992 Našumas: 4 000 (1,5 L / 2 L buteliams) Įdiegta galia: 150 kW Komplekte 1,5 L formos Preformų padavėjas Techninė būklė: naudota mašina, įsijungia, programa veikia gerai Psdpowa Rhrefx Apyogk

Būklė: naudotas, Stretch blow moulding machine by Etek ISBM Line = Injection stretch blow moulding Pgedpfxjkucxls Apyjk Stretch blow moulding machine for single-use PET bottles from PET preforms Stretch blow moulding machine for rotary table production Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 Volt, 50 Hz Net weight approx. 6000 kg As-new condition

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2024, bendras svoris: 41 kg, valdiklių gamintojas: FANUC, ašių skaičius: 6, Ši 6 ašių FANUC CRX-20iA/L roboto ranka buvo pagaminta 2024 m. Didžiausia jos keliamoji galia - 20 kg, o pasiekiamumas - 1418 mm. Roboto sąnariai turi plačius judesių diapazonus, todėl robotas yra lankstesnis atliekant sudėtingas užduotis. Jei ieškote aukštos kokybės automatizavimo galimybių, apsvarstykite mūsų parduodamą "FANUC CRX-20iA/L" mašiną. Susisiekite su mumis ir gaukite daugiau informacijos. • Robotas yra naujas ir nenaudotas. Tik išpakuotas. • Didžiausia apkrova ties riešu: 20 kg • Didžiausias pasiekiamumas (nuo atramos galo): 1418 mm. • Valdomos ašys: 6 • Pakartojamumas: ±0,04 mm • Mechaninis svoris: 41 kg • Sąnarių judesių diapazonas: • J1: 360° Podjx D Ezlepfx Apyjgk • J2: 360° • J3: 540° • J4: 380° • J5: 360° • J6: 450°

Būklė: geras (naudotas), Gamybos metai: 2011, Krauss Maffei Injection Moulding Machine KM 850-12000 MX With Krauss Maffei Robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - Injection unit control. MC 5 control system with colour monitor, integrated control panel and USB data carrier. Plasticizing unit Complete plasticizing unit for thermoplastics with 135 mm screw diameter, shut-off valve, and open nozzle. Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8,500 kN - Opening force: 560 kN - Platen dimensions (H x V): 1,600 x 1,600 mm - Tie bar spacing (H x V): 1,140 x 1,140 mm - Maximum opening stroke: 1,600 mm Pgodetrya Ropfx Apyok - Mould height (min-max): 500 - 1,100 mm - Daylight: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200 / 100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Injection weight for PS: 6,098 g - Injection rate: 1,414 cm³/s Electro-hydraulic equipment - Rated motor power: 132 kW - Dry cycle time per Euromap 6: 965 cycles/h - Oil tank capacity: 2,440 l Weight and dimensions - Net weight with control cabinet: 49 t - Footprint dimensions (L x W x H): 11.72 x 2.92 x 2.71 m.

Būklė: naudotas, Gamybos metai: 2002, Overview  This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and is used for filling carbonated water and soft drinks into 1.5-liter PET bottles. The line has a production capacity of up to 16,000 bottles per hour. It has been regularly maintained and is in good condition. Availability: End of August 2025. Technical data  Output: up to 16,000 bottles per hour (based on 1.5L PET bottles) Formats: 1.5L PET bottles (short-neck and cap) Bottle material: PET Filler type: Isobaric filler Year of manufacture: between 1999 and 2007 (various machines) Closure type: short-neck Label type: OPP (Contiroll) Scope of supply 1 x Stretch Blow Molding Machine CONTIFORM S16 | Krones | 2002 | incl. preform hopper & chiller Air conveyors from the blow molder to the labeler & filler 1 x Labeler CONTIROLL | Krones | 2000 1 x Triblock 77/88/11 MECAFILL isobaric filler | Krones | 2002 | incl. metal detector 1 x Mixer for carbonated water and beverages | ca. 2000 1 x Inkjet printer HITACHI RXS Conveyors between filler and shrink tunnel 1 x Shrink tunnel VARIOPAC | Krones | 2007 | 45 packs/min 1 x Handle applicator TWIN PACK MDE INOX | 2003 | single-lane, 45 packs/min Pack transport to the palletizer 1 x Palletizer KETTNER KR51112 Pressant Universal | 1999 Pallet magazine with lift and transport 1 x Pallet stretch wrapper ROBOPAC GENESIS | 2002 Pgjdpfxjwzvl So Apyek

Būklė: naudotas, Gamybos metai: 2016, Overview The complete bottling line for large PET bottles is located in a mineral water plant and was used for filling water. The line has been regularly maintained and is in excellent condition. Output: 3,000 bottles/hour List of machines: - Blow Molder | Kosme | KSB4RG 2016 | 3,600 bph - Air Conveyor | NTS | 2016 - Rinser - Filler - Capper | GyM | MONOBLOC 12/3 PVG | 1995 | 3,000 bph - Cap Feeder Tolva | GyM | 1995 - Handle Applicator | TAS | VA-1150/75C | 2009 | 3,000 bph - Handle Applicator | And&OR | 50SIA5000R8P2-TL | 2009 | 3,000 bph - Labelling Machine | Auxiemba | Gacela R-16/8-HM-12 | 2010 | 4,100 bph - Batch Coder | MACSA | K-1030PLUS | 2008 - Bottle Inverter/Rotator | GyM | 2001 - Divider | SMI | DIVIPACK 2000 | 2002 Pjdpfx Ajtuyq Ropyjgk - Shrink Wrapper | SMI | LSK 30F | 2002 | 7,200 bph (30 packs per minute, 2*2 on 2.5L / 2 on 5L bottles)

Gamybos metai: 2008, būklė: paruoštas naudoti (naudotas), A Solarco packaging cutting and creasing machine for corrugated board is available. Sheet width: 1700mm, max. sheet dimensions X/Y: 1700mm/4000mm, min. sheet dimensions X/Y: 300mm/600mm, single production output: 200-600 pieces/h, max. multiple production output: 2000 pieces/h, board thickness range: 2mm-8mm, machine dimensions X/Y/Z: approx. 5500mm/4000mm/1900mm, weight: approx. 4500kg. Documentation available. On-site inspection possible. Pedpfx Apowgc Aheyogk