3 ritinių lakštų valcavimo mašinos su elektrine pavara

KK-Industries CYL 130-20/4.0

Būklė: naujas, Pre-bending: 10.0 mm Sheet length: 2550 mm Sheet thickness: 13.0 mm Total power requirement: 15.0 kW Approx. weight: 10.6 t Itsdpfxjd Ab H Ij Alrjh Dimensions (LxWxH): 4.76 x 1.66 x 1.59 m Image similar to actual product Bending capacity: 13.0 mm » at 3x top roller diameter Pre-bending: 10.0 mm » at 1.5x top roller diameter Top roller diameter: 270 mm Lower roller diameter: 250 mm Side roller diameter: 220 mm Max. opening: 50 mm Working height: 1,155 mm • Fully hydraulic drive of top and bottom rollers via planetary gearbox • Digital display for side roller positions • Hydraulic drop-end bearing • Infinitely variable rolling speed • Conical bending device • Hardened rollers • Hydraulic adjustment of side rollers, synchronized via PLC • Hydraulic adjustment of lower roller via torsion shaft • Pressure-adjustable lower roller • Electrical and hydraulic overload protection • Mobile control console • Machine and equipment comply with CE regulations See catalog at the following link:       Important points for conical rolling: • The maximum sheet thickness is 50% of the nominal capacity • The cone length must be max. 30% or more than 60% of the roller length • Hardened rollers are recommended

Būklė: naujas, Sheet length: 2050 mm Sheet thickness: 3 mm Total power requirement: 2.2 kW Weight approx.: 1,500 kg Dimensions (LxWxH): 3,200 x 750 x 1,000 mm Technical data Roller diameter: 130 mm Equipment • 3 rollers • Asymmetrical roller arrangement with pre-bending capability • 2 powered rollers driven by brake motor • Top roller can be swung out forwards • Forward/reverse operation • Conical rolling possible by tilting the rear roller • Mobile control panel Operating manual in GERMAN Itedpfx Aljd Ab H Asrsh Catalogue – see following link:

Būklė: naujas, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Cutting capacity at 45 degrees: round 550 mm Cutting capacity at 45 degrees: square 550 mm Cutting capacity at 45 degrees: flat 550 x 600 mm Cutting capacity at 60 degrees: round 370 mm Cutting capacity at 60 degrees: square 370 mm Cutting capacity at 60 degrees: flat 370 x 600 / 450 mm Saw blade length: 7260 x 41 x 1.3 mm Iedsfg E Hmjpfx Alreth Blade speed: 15 - 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.8 t Space requirement: approx. 5.85 x 3.7 x 2.7 m 2-column double mitre bandsaw for fast cutting, equipped with pusher system P15. Option: P30. Hydraulic saw frame lowering: • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system." An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor, combined with a reliable hydraulic brake via large-radial central positioning. The worktable runs on high-quality preloaded bearings, ensuring exceptionally smooth rotation. CNC control: A CNC controller allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitres. Double-sided gripping positioning system: The B&S pusher, feed, and positioning system is equipped with "double-sided opening grippers" which are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal form. The pusher system is built as a separate unit and runs on ball-bearing linear guides, precision ground rack, and is driven by a frequency-controlled, robust gear motor.

Būklė: naujas, apatinio volelio skersmuo: 140 mm, viršutinio volo skersmuo: 140 mm, šoninio volelio skersmuo: 140 mm, volelio skersmuo: 140 mm, vėjo ilgis: 2 070 mm, plieno lakšto storis (maks.): 4 mm, Įranga: avarinis stabdymas, dokumentacija / vadovas, grūdinti volai, kūginio lenkimo įrenginys, pasukamas viršutinis volas, - Capacity: 2070 x 4 - Electrically adjustable trailing roll - Electrically adjustable lower roll (material clamping) - Digital display for rear roll movement - Digital display for lower roll movement (material clamping) - Infinitely variable speed control Itjdpfxjhvr Nls Alroh - Hardened rolls - Conical rolling - Removable upper roll - Brake motor - Emergency stop - Documentation - 400V

Būklė: naujas, Cesurbend 3-Roll Plate Bending Machine MRS 1550 x 140 Technical Specifications: Special equipment included in the price: Iodpfx Aljhrdmmsrjth - Motorized adjustment of lower rolls - Hardened rolls - Motorized adjustment of rear rolls - Digital readout Sheet width: 1550 mm Maximum sheet thickness: 5.0 mm Pre-bending thickness: 4.0 mm Roll length: 1550 mm Roll diameter: 140 mm Weight: 1360 kg Dimensions (L x W x H): 2320 x 850 x 1200 mm Motor: 2.2 kW Equipment: - Top and bottom rolls electrically driven - Swing-out top roll - Cone bending device - Asymmetrical roll arrangement - Self-braking main motor - Separate control and operator panel - Safety wire - Values valid for St-37 / 240 N/mm² - CE mark

Būklė: naujas, Sheet thickness: 1.8 mm Ijdod Ab T Sopfx Alrsth Bending length: 1050 mm Top roller diameter: 70 mm Sheet length: 1050 mm Details: - Cast iron body - Motorised bending - Cone bending device - Manual adjustment of rear and lower rolls by handwheel - Portable control panel - Complies with CE standards Options: - Motorised rear roll: EUR 825,-- - Digital display for rear roll position: EUR 1,010,-- - Body cover: EUR 274,-- - Hardened rolls: EUR 392,--

Būklė: naudotas, Gamybos metai: 2019, Pjovimo griovelio plotis: 3-100 mm Traukimo ilgis: 750 mm Darbinis greitis: 0-20 m/min Gręžinio skersmuo: 10-500 mm Pjovimo greitis: 0-20 m/min Grįžimo greitis: 0-50 m/min Keliamoji galia: 35.000 kg Jungiamoji galia: 12,27 kW Itjdpjy Tigtofx Alrsh Pjovimo jėga: 40.000 N Stalo matmenys: 500 x 770 mm Mašinos svoris: apie 2,1 t Įranga / priedai: Gamybos metai (originalas): 1986 2019 m. perrinkta ir su nauja valdymo sistema - Dalių daliklis - Daug priedų (griovelių peiliai, įrankiai, įvairūs) - Dokumentacija

Būklė: labai geros būklės (naudotas), Keyseating machine Hydraulic Make: Polymat Model: 50/400 Keyway width: 3–50 mm Bore diameter: 13–500 mm Maximum stroke length: 400 mm Drawing force: 3 MP Table load capacity: 10 t Cutting speed: infinitely adjustable from 0–20 m/min 11 feeds from 0.01–0.15 mm 380 volts 5.5 kW Accessories: Itodpfx Aljwxvb Iorsh - various broaching knives - extended clamping table 700 x 700 mm - jib for setting down the knife guide bar - operating manual - electrical schematic Transport dimensions: L: 1500 mm W: 1100 mm H: 2340 mm Weight: 2200 kg

Būklė: naudotas, Įpjovos plotis: 3-28 mm Įrankio ilgis - maks. 1200 mm Darbo greitis: 3 m/min + 6 m/min Traukimo jėga: 60 kN prie 3 m/min Ijdpsyz Dgdjfx Alrsth Traukimo jėga: 40 kN prie 6 m/min Eiga: 1050 mm Staklių svoris apie 600 kg Pridedamas didelis įrankių (pjūkliukų) asortimentas

Būklė: naujas, Sheet thickness: 2 Bending length: 1250 Top roll diameter: 75 Technical Specifications: - Cast iron body - Manual or motorized (optional) bending - Top roll can be swung out to the side after bending for easy material removal - Conical bending device - Manual up/down movement of the rear roll and lower roll using a handwheel - Portable control panel - In compliance with CE standards Options: - Motorized rear roll EURO 825 - Digital display for rear roll position EURO 1,010 - Body covering EURO 314 Iedpfxjd Ab T Hj Alrsth - Hardened rolls EURO 465 We have numerous references!