3 ritinių lakštų valcavimo mašinos su elektrine pavara

KK-Industries CYL 110-15/3.5

Sąlyga: naujas, Gamybos metai: 2025, CFM-01 Profilschneidemaschine Fpsdpfx Asfwxxnsb Seb Die Maschine wurde für das Schneiden von Profilen entwickelt, die in P20- oder P30-Lüftungskanälen und -Formstücken verwendet werden. Die Schnittqualität ist sehr hoch, es entstehen nach dem Schnitt keine Grate. Schnittlängen können dank des von 0–1500 mm einstellbaren Anschlags beliebig gewählt werden. Das verwendete Diamantblatt weist eine um ein Vielfaches längere Lebensdauer auf als Bandsägen. Die Maschine ist mit einem Pneumatikzylinder-System ausgestattet, das für die Bewegung der Scheibe und den Materialandruck verantwortlich ist. Dank des Fußpedals ermöglicht die Maschine ein schnelles und komfortables Schneiden der Profile.

Sąlyga: naujas, Table diameter: 350 mm Table load capacity: 0.1 t Swivel range: 0–90 degrees Horizontal table load: 100 kg Vertical table load: 50 kg Bore diameter: 30 mm Table rotation speed: 0.5 – 5 rpm Voltage: 230 V Total power requirement: 0.2 kW Machine weight: approx. 0.2 t Space requirements: approx. 0.5 x 0.5 x 0.5 m Welding table with hollow shaft D-DWP Rotary tilt tables with bore for turning, tilting, and welding of small workpieces up to 100 kg. - Rotary and tilting axis - Stepless speed control - Compact design - Includes foot pedal Fodpfx Aegvkk Njb Sjpb

Sąlyga: naujas, Gamybos metai: 2024, Electro-hydraulic press 110 Ton Made in Italy Fodpfsfh R N Djx Ab Sopb The P110 MR is equipped with: - Integrated motor-driven power unit 400 V 50-60 Hz. - Rapid approach and return pump, preset to 20 bar. - Adjustable pressure pump with handwheel to achieve the required force. - Pressure relief valve with mechanical lock to prevent overpressure. - Standard pressure gauge allowing extremely precise adjustment of delivered force. The P110 MR is the only hydraulic press featuring two uprights made from monolithic FE 510 structure, laser-cut with no welded joints at the most stressed points. This feature provides extraordinary robustness. It is deformation-resistant and ensures tight working tolerances. The P110 MR is equipped with a 30-liter tank and has a rapid descent speed of 1,400 mm/min. Weight: 1,100 kg Max pressure: 350 bar Max capacity: 110 tons Rapid flow rate: 34 l/min Slow flow rate: 5 l/min Distance between uprights: 1,004 mm Rapid ram advance: 1,400 mm/min Slow ram advance: 130 mm/min Voltage: 400 V Frequency: 50-60 Hz Power: 3 kW Max current draw: 7.3 A Cylinder stroke: 300 mm Cylinder diameter: 200 mm Rod diameter: 110 mm Piston descent speed: 23 mm/sec Tank capacity: 30 liters

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1989, viršutinio volo skersmuo: 200 mm, šoninio volelio skersmuo: 150 mm, maks. lakšto storis: 6 mm, darbinis ilgis: 3 000 mm, Working length 3000 mm Bending capacity 6 mm Pre-bending capacity 4 mm Top roller diameter 200 mm Side roller diameter 150 mm Hydraulic drop-end Fedpfxouzm Ayo Ab Sjpb

Gamybos metai: 1991, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 07282, Offer 22336 Technical Data: - Max. working width: 3030 mm - Max. sheet thickness without pre-bending: 4 mm - Max. sheet thickness with pre-bending: 3 mm - 3 driven rollers - Roller diameter top / bottom: 205 / 185 mm Fpodpfx Abomdqlle Ssb - Working speed: m/min - Drive – brake motor: 400 V / 7.5 kW - Required space: approx. W 5500 x D 1400 x H 1300 mm - Weight: approx. 4.7 t - with pre-bending function - Rear roller adjustable at an angle - Swing-out bearing for pivoting the top roller - Extended roller ends for mounting profile rollers - Forward and reverse operation - Separate control panel

Sąlyga: naujas, Dimensions (LxWxH): 1,630 x 700 x 1,200 mm Fpjdpfjd Eqqqsx Ab Sob Approximate weight: 480 kg Total power requirement: 1.1 kW Pre-bending: 2 mm Sheet thickness: 3 mm Sheet length: 1,050 mm Technical Data Plate Rolling Machine Roller diameter: 90 mm Rolling speed: 6 m/min • Asymmetrical roller arrangement • 2 rollers driven by brake motor • Rear roller adjustment with handwheel • Upper roller can be swung out • Conical rolling device • Double foot switch for forward/reverse operation • Lower and rear rollers with wire grooves • Operating instructions in GERMAN EXTRA: Hardened rollers EUR 900,-- Catalogue available at the following link:

Gamybos metai: 2022, Sąlyga: naujas, Ostas 3-Roller Plate Bending Machine SBM 1270 x 95 Special features included in the price: - Hardened rolls - Motorized rear roll adjustment - Digital display Features: • Asymmetrical 3-roller plate bending machine with motorized drive • Hardened rolls • Motorized rear roll adjustment • Digital display • Swiveling upper roll • Conical bending device • Foot switch Technical details: • Sheet width: 1270 mm Fjdsg Tzbhspfx Ab Sspb • Sheet thickness: 3.0 mm • Roll length: 1270 mm • Roll diameter: 95.0 mm • Minimum bending diameter: 140.0 mm • Motor power: 1.1 kW • Dimensions L-W-H: 2100 x 760 x 1250 mm • Weight: 470 kg

Sąlyga: naujas, Fastech 3-Roll Plate Bending Machine FRS 2050 x 140 Technical Specifications: Fpodpfxshzq D Hj Ab Sjb Special features included in the price: - Hardened rolls - Motorized rear roll adjustment - Motorized lower roll adjustment - 2 x digital readouts Sheet width: 2050 mm Sheet thickness: max. 4.5 mm Sheet thickness for pre-bending: 4.0 mm Roll length: 2050 mm Roll diameter: 140 mm Smallest bending diameter: 210 mm Weight: 1530 kg Dimensions (L x W x H): 3240 x 900 x 1200 mm Motor: 2.2 kW Equipment: - Top and bottom rolls electrically driven - Top roll swing-out - Conical bending device - Asymmetrical roll arrangement - Self-braking main motor - Separate control and operating panel - Safety cord Values refer to St-37 / 240 N/mm² CE mark

Sąlyga: naujas, Gamybos metai: 2025, volelio skersmuo: 140 mm, vėjo ilgis: 1 570 mm, - Capacity: 1570 x 4.5 mm Fpsdpfsgg Nv Ijx Ab Sjb - Electrically adjustable rear roll - Electrically adjustable bottom roll (material clamping) - Digital display for rear roll movement - Digital display for bottom roll movement (material clamping) - Hardened rolls - Conical rolling - Brake motor - Emergency stop - Documentation - 400V

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2006, lazerio galia: 4 000 W, IMMEDIATELY AVAILABLE: TRUMPF Trumatic L 3030 – 4 kW – Year 2006 TECHNICAL DATA: Manufacturer: TRUMPF Model: L 3030 – 4 kW Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm CNC Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. sheet thickness mild steel: 20 mm Max. sheet thickness stainless steel: 15 mm Max. sheet thickness aluminum: 10 mm Operating hours: NC Machine regularly serviced by TRUMPF! Transmitting tube: new in 2024 TASC laser control: new in 2022 Driver stage: replaced in 2018 Magnetic bearing electronics: new in 2016 STANDARD EQUIPMENT: - Enclosed machine frame with integrated laser unit Laser unit: CO2 laser TLF 2000, high-frequency excited, maintenance-free turbo radial blower, Fedpsuthz Tefx Ab Sspb mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servo motors - Quick-change cutting head system - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - Automatic focus position setting AutoLas Plus - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for making small holes - PMS plasma sensor technology - Automatic sheet metal edge detection - Programmable power cycles - Microweld - Automatic shut-off - Work area lighting - Sinumerik 840D control: open PC-based control, easy operation, online help, integrated e-Shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light curtains, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color monitor - Electrical equipment: Voltage 400 V / 50 Hz - Paintwork: Standard RAL 9002/5010 ADDITIONAL EQUIPMENT: - Laser TLF 4000 incl. lens monitoring sensor - PCS Process Control System