Vyniojimo ir atraišiojimo būgnas, būgnas ritininėms medžiagoms, atraišiojimo-vyniojimo būgnas

KEMMERICH / STANGE HA 1500 / 500

Sąlyga: paruoštas naudoti (naudotas), A Honsel bag making machine (converting machine) is available. Working width: 500mm, crimp closure: one-sided. Includes cardboard flange feed, folding table, and stacking table with counter and prefeed. On-site inspection is possible. Knjdpjvtqrfefx Advsd

Sąlyga: naudotas, Gamybos metai: 2009, Pressure: 40 t Stroke: 4 - 100 mm Strokes per minute: 130 /min Throat depth: 230 mm Installation height: 475 mm Table size: 650 x 460 mm Pass-through opening in table: 205 x 165 mm Table height above floor: 710 - 950 mm Table adjustable by: 240 mm Knjdpfx Ajvzxpnodvjd Ram area: 435 x 240 mm Ram adjustment: 85 mm Drive power: 5.0 kW Weight: 2.6 t Space requirement approx. 1.2 x 1.7 x 2.3 m (L x W x H) Approved for manual loading operations in accordance with CE standards with motor, hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, motorized central lubrication, adjustable table, two-hand and foot operation.

Sąlyga: naudotas, Coil Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness without using the straightener: 6 mm Sheet thickness with straightener engaged: 2 mm - Very well equipped with feed assistance features Required floor space (L x W): approx. 7000 x 3000 mm Total system weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, machine no. Strip width, nominal: 400 mm Strip width, maximum pass width: max. 455 mm Strip thickness at 400 mm width (steel): max. 1.5 mm Strip thickness at 400 mm width (copper): max. 2 mm Speed: max. 40 m/min Number of straightening rolls: 7 pcs Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 pcs Pinch roll diameter: Ø 80 mm Entry and pass height: 1500 mm - Straightening rolls hardened, ground and hard-chrome plated, with central support - Pinch rolls hardened, ground, and hard-chrome plated, with hydraulic release - Manual straightening roll adjustment - Feed assistance with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable lateral strip guide - All straightening rolls driven through distributor gearbox with cardan shafts - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or processing thicker material; stroke movement via trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, machine no. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with loading saddle) Coil outside diameter: max. 2000 mm (without loading saddle) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of decoiler drum above baseplate: 1500 mm - Decoiler drum powered by hydraulic motor and gear - Pneumatic overrun brake on decoiler drum TWINFLEX - Hydraulic expansion of decoiler drum, central through wedge slider system - Hydraulic hold-down arm with hydraulically driven twin pendulum roller - Coil loading saddle with 12 ton lifting force and 300 mm stroke Kjdpfoif Sg Ssx Advend - Decoiler installed on elevated base frame with motorized cross-travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central hydraulic unit (adjacent) Tank capacity: 350 liters Motor power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1980, Maišelio plotis: 80–260 mm. Vamzdelio ilgis: 135–370 mm. Ksdpsw Nvhuefx Advend Našumas: iki 180 vnt./min. Formavimo medžiaga: nuo 35 iki 120 g Maksimalus rulono plotis: 650 mm Elektros jungtis: 380V, 50/60 Hz Energijos suvartojimas: 35 kW

Sąlyga: paruoštas naudoti (naudotas), A Honsel bag making machine (converting machine) is available. Working width: 500mm, sealing: single-sided. Includes cardboard flange feeder. The system is partially dismantled. Timing belts need to be tensioned and partially replaced. Timing belt pulleys are disassembled and need to be reinstalled. An on-site inspection is possible. Knjdpjvtqrlsfx Advsd

Sąlyga: naujas, Gamybos metai: 2024, - Capacity 1070 x 3 mm - Electrically adjustable rear roll - Digital readout Knjdogg Rbpspfx Adved - Hardened rolls - Conical rolling - Brake motor - Foot switch - Emergency stop - Documentation - 400V

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, tekėjimo aukštis: 3 000 mm, ruošinio svoris (maks.): 50 000 kg, tekėjimo skersmuo: 5 500 mm, padavimo ilgis X ašis: 3 150 mm, padavimo ilgis Z ašis: 1 800 mm, priekinės plokštės skersmuo: 4 500 mm, bendras aukštis: 8 000 mm, bendras plotis: 7 000 mm, bendras ilgis: 12 000 mm, sukamosios stalo skersmuo: 4 500 mm, stalo apkrova: 50 000 kg, garantijos trukmė: 12 mėnesiai,

Gamybos metai: 1987, Sąlyga: naudotas, Pressure: 40 t Outreach: 270 mm Stroke: 4–100 mm Strokes per minute: 130 Ram adjustment: 80 mm Table surface: 670 x 540 mm Ram surface: 460 x 300 mm Through-hole in table Ø 100 mm Table height: 850 mm Pin hole in ram Ø 50 mm Machine weight approx. 6 t Space requirement (WxDxH) approx. 1500 x 2300 x 3300 mm Hydraulic clutch-brake combination Central grease lubrication Hydraulic overload protection in the ram Automatic stroke adjustment Motorized ram adjustment Two-hand operation Foot operation Counter bearing Air cooler Hydraulic pin clamping Kedpfsp Syctox Advond Hydraulic connecting rod clamping Hydraulic tool clamping

Gamybos metai: 1991, Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Arsoma EM 410 Year of manufacture: 1991 Machine configuration: • Unwinder • Web edge control • Infeed • 3 printing units with hot air drying • Turn bar between printing unit 1 and 2 • 3 die-cutting units (3 die-cutting units with 410 mm web width, 1 die-cutting unit with 280 mm web width for changing) • Matrix rewinder • Turn bar • Slitting unit with upper and lower knives • Outfeed The control system was completely replaced about 5 years ago. The following accessories are included with the machine: Printing cylinders (number of teeth, quantity of cylinders): Z 66: 2 pieces Z 68: 1 piece Z 72: 1 piece Z 74: 1 piece Z 80: 2 pieces Z 81: 1 piece Z 83: 1 piece Z 84: 2 pieces Z 85: 3 pieces Z 86: 3 pieces Z 87: 3 pieces Kodpfxewltqgo Advsnd Z 88: 1 piece Z 89: 3 pieces Z 90: 3 pieces Z 92: 1 piece Z 93: 1 piece Z 94: 2 pieces Z 95: 1 piece Z 96: 1 piece Z 97: 3 pieces Z 98: 1 piece Z 100: 1 piece Z 102: 2 pieces Z 105: 3 pieces Z 100: 3 pieces Z 101: 1 piece Z 104: 1 piece Z 108: 2 pieces Z 110: 1 piece Z 112: 2 pieces Z 115: 1 piece Z 120: 2 pieces Z 128: 1 piece Magnetic cylinders: Z 94: 1 piece Z 96: 2 pieces Z 100: 1 piece Z 102: 1 piece Z 104: 1 piece Z 108: 1 piece Z 112: 1 piece Z 126: 1 piece Z 128: 1 piece Z 136: 1 piece Additionally included: 3 x rubber ink dip rollers 3 x ink trays 3 x anilox rollers The machine was in full working condition in our production until February 2025. Due to the growing demand for multicolored labels, we replaced it with a 6-color press. The machine was professionally dismantled and is stored at our facility. It is available from stock. Inspection possible in dismantled condition. We do not provide any warranty or guarantee.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2008, Nominalioji presavimo jėga: 800 kN Stūmoklio eiga, reguliuojama pakopomis: 30...120 mm Stūmoklio reguliavimas: 100 mm Atstumas nuo stūmoklio ašies iki stovo: 300 mm Eigos dažnis tuščiąja eiga: 70 ×/min Eigos dažnio reguliavimas be pakopų: 40–130 ×/min Įrankių montavimo aukštis (esant didžiausiai eigai apačioje ir reguliavimui viršuje): 400 mm* Stalo spaudimo plotas (P×G): 1.200 × 600 mm Stūmoklio spaudimo plotas (P×G): 600 × 450 mm Įvorės skersmuo stūmoklyje: 50 H7 mm Pagrindinio variklio galia: 7,5 kW Mašinos aukštis apytiksliai: 3.250 mm Mašinos svoris: 7.500 kg Knodpfx Aew Ec A Eodvjd - Su hidrauline perkrovos apsauga, visiškai automatiniu stūmoklio reguliavimu, pusiau automatiniu eigos reguliavimu, naujausia UVV - Su Siemens S7/300 valdymu su lietimui jautriu ekranu mobiliame valdymo pultelyje - Dviejų rankų valdymas, eigos vartų pabaigos jungikliai su apsauga - Centravimo griovelis - Volelinis padavimas: Servo 300 (juostos plotis 300 mm, juostos storis 4 mm, skerspjūvis 1000 mm²) - Volelių blokų juostos - Vibracinės kojos