6096 - Ritė 3 t

6096 - HASPEL, Coiler 3 T

Sąlyga: naudotas, SANDWICH PANEL PRODUCTION LINE FOR DOORS AND WALLS UP TO 610 MM WIDTH, manufactured by METECO This sandwich panel production line is designed for manufacturing door and wall panels up to 610mm in width, with an annual capacity of 1,500,000 m panel/year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1,500,000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum coil weight: 10 tons Maximum external coil diameter: 1400 mm Internal coil diameter: 508 mm Maximum sheet width: 610 mm Ffsdpfxjvtpcio Ab Sst Maximum panel thickness: 80 mm Power supply: 400 V Frequency: 50 Hz SCOPE OF SUPPLY 1. Upper Sheet Processing Section - 10T top decoiler with coil car - Roller and pinch feed - Upper coil steel frame - Polyethylene film applicator - Embossing machine for texture patterns - Decorative pattern press - Upper roller forming machine (12 stands) - Upper steel frame for forming machine - Upper sheet guide 2. Lower Sheet Processing Section - 10T double bottom decoiler with coil car - Polyethylene film applicator - Corona treatment machine - Embossing machine - Lower roller forming machine (12 stands) - Roller conveyor - Operator desk for entry line 3. Panel Forming Section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foam portal - Foaming cabin - Side sealing and tape applicator system - Double-press conveyor - Double-belt heating system - Double-belt press - Outfeed roller conveyor - Cutting saw - Soundproof cabin - Dust extraction unit - Operator control station 4. Stacking Section - Automatic panel tilting unit - Stacking conveyor - Outfeed conveyor - Packing section - Spacer-feeder polystyrene system - Infeed conveyor - Packing machine - Outfeed conveyor - Packing machine 5. Panel Production Equipment - Upper roll forming tools - Lower roll forming tools 6. List of Additional Machines - Station for containers: polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Line speed: 12 m/min Thickness: 40-80 mm Maximum coil weight: 10 tons Maximum external coil diameter: 1400 mm Internal coil diameter: 508 mm Maximum sheet width: 610 mm Maximum panel thickness: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1,500,000 m panel/year

Sąlyga: geras (naudotas), Gamybos metai: 2002, Manufacturer: BRÜCK Model: 12/1600 Ffodpfxohrnbke Ab Sjt Load capacity: 12,000 kg Maximum sheet width: 1,600 mm Coil diameter: 1,800 mm Weight: approx. 14 t Without control cabinet.

Sąlyga: naudotas, Medžiagos plotis 300 mm Ritės svoris 3 t Medžiagos storis 2 - 4 mm Tiesinimo staklės, 7 volai, gam. Schleicher, tipas RM 6-95/160 Juostos plotis: 300 mm Juostos storis: 2 - 4 mm Tiesinimo skerspjūvis: 1200 mm² Įtampa: 220/380 V 50 Hz Galia: 3,1 kW Ritės laikiklis su prispaudimo voleliu, gam. Schleicher, tipas H-3 Maks. apkrova: 3 t Juostos plotis: 400 mm Įtampa: 220/380 V 50 Hz Galia: 3,92 kW Fsdpfx Abjcdrmmj Seft be valdymo

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Fedpfsfxyhfox Ab Ssft Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Gamybos metai: 1987, Sąlyga: naudotas, Sheet width 150 mm Coil weight 80 kg Coil outside diameter 650 mm Mandrel height 1000 mm Fedpfxsfn Aqlo Ab Soft Expansion range 230 - 445 mm Total power requirement kW Machine weight approx. t Space requirement approx. m motorised decoiler

Sąlyga: naujas, Gamybos metai: 2026, Working area: 1500 – 3000 x 2100 – 12000 mm Ffsdpfx Aon Nv H Ssb Set Z-axis clearance: 500 – 1500 mm Drive system: Omron servo drives with EtherCat protocol, X and Y axes with hardened ground helical racks accuracy class 6, Z axis with ball screw accuracy class 5 Linear bearings: Bosch Rexroth 35 Travel speed: X, Y up to 45 m/min; C, A up to 6000 degrees/min Software resolution: 0.0005 mm Positioning accuracy: 0.01 mm Gantry drive: dual-side master/slave with gantry angle correction Electrospindles: 8 kW to 36 kW Spindle inverter: yes Maximum spindle speed: 24,000 rpm (option: 6000, 40,000, 50,000) Construction: welded, ribbed, stress-relieved, and precision-machined steel frame Table type: vacuum, hybrid, steel, or aluminum with M16 or M18 tapping holes #router #CNC #millingmachine #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #Chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell

Gamybos metai: 2008, Sąlyga: labai geros būklės (naudotas), SMG HZPU 8000-3000/2100-S1 Hydraulische Ziehpresse Marke: SMG Modell: HZPU 8000-3000/2100-S1 Fsdjn Awd Rspfx Ab Ssft Baujahr: 1995 Beschreibung: Hydraulische Ziehpresse in H-Rahmen-Bauweise Presskraft: 800 Tonnen Spannfläche: ca. 3.000 x 2.100 mm Einbauhöhe: max. 1.400 mm

Sąlyga: naujas, spalva: geltonas, bendras svoris: 2 000 kg, tuščias svoris: 2 000 kg, padang padangų: 100 procentas, pavaros būklė: 100 procentas, grandinės būklė: 100 procentas, Gamybos metai: 2024, GG2000 CAB Gunter Grossmann & Yanmar Tracked Excavator Günter Grossmann GG2000 CAB. Mini crawler excavator GG2000 CAB, Japanese KUBOTA engine, KDK hydraulic pump, USA EATON travel motor. Very high quality. Fjdjqv E S Ropfx Ab Ssft (Excl. VAT) Includes: GG 2000 CAB Excavator + Narrow bucket 400mm + Narrow bucket 400mm + Grading bucket 1000mm SPECIFICATIONS Model: GG2000 CAB Bucket capacity: 0.045 m³ / 200kg Bucket widths: 250 mm, 400 mm, 600 mm, 1000 mm Engine: Japanese Yanmar Rated power: 27 HP Displacement: 1.53L Engine: three-cylinder, water-cooled Main pump: Teife Control valve: Teife Swing motor: USA Eaton Travel motor: USA Eaton Max. digging depth: 2150 mm Max. vertical digging depth: 1740 mm Max. digging height: 3275 mm Overall dimensions (LxWxH): 3800 x 1050 x 2170 mm Track length: 1620 mm Ground clearance upper chassis: 460 mm Swing radius: 360° DIMENSIONS Overall dimensions (LxWxH): 3800 x 1050 x 2170 mm Track length: 1620 mm Ground clearance upper chassis: 460 mm Swing radius: 360° WORKING RANGE Max. digging depth: 2150 mm Max. vertical digging depth: 1740 mm Max. digging height: 3275 mm

Sąlyga: geras (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, vėsinimo galia: 350 kW (475,87 AG), bendras svoris: 1 930 kg, bendras plotis: 1 200 mm, bendras ilgis: 3 600 mm, bendras aukštis: 2 000 mm, AMMONIA-KÜHLER GEA GRASSO 350 KW Hersteller: GEA Ffodpfxsim R A Is Ab Set Kälteleistung: 350 kW Kältekreislauf: 1 St. Kältemittel: R717 Baujahr: 2005 Verdichter: 1 St. Kolbenverdichter GRASSO Wärmetauscher: Rohrbündel Abmessungen: 3,60 x 1,20 x 2,00 m Gewicht: 1.930 kg Zustand: Gut

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, The JJZ-CP type press is designed for the production of plywood, doors, and MDF boards. Loading and unloading of laminated components from the press is performed automatically via powered rollers. The press can be integrated with glue applicators. Technical data: - Maximum pressure: 500T (adjustable) - Maximum feed height: 1300 mm - Maximum feed dimensions: 1300 x 2500 mm - Press dimensions: 3600 x 1370 x 4500 mm - Press installed approximately 500 mm below floor level - Infeed table: 2000 x 1960 mm - Outfeed table: 2350 x 2500 mm Fodpfetutwvox Ab Seft - Maximum power: 13.2 kW - CE mark