Sandėlio liftas

Kardex XP 250 C3000

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Išoriniai matmenys: Aukštis: 5650 mm Pastabos: Mašinos aukštis pagal kliento pageidavimą gali būti sumažintas. Sumažinimas: -1,5 m, -2,0 m Plotis: 2780 mm Gylis: 2312 mm Talpyklos matmenys: Aukštis: 55 mm Plotis: 2450 mm Gylis: 864 mm Lentynos apkrova: 270 kg vienai lentynai Lentynų skaičius: Skaičius pagal kliento pageidavimą Bendra naudingoji apkrova: 2 x 33 150 kg Išrašų skaičius: 1 Spalva: mėlyna Njdpfjxmgwajx Aghswp Pastabos: Mašinos aukštis pagal kliento pageidavimą gali būti sumažintas. -1,5 m, -2,0 m Pardavimas tik DACH šalyse (Vokietija, Austrija, Šveicarija) ir Beniliukso šalyse (Nyderlandai, Belgija, Liuksemburgas) Informuojame, kad šiuo metu parduodame ir pristatome tik D-A-CH ir Be-Ne-Lux šalims. Dėkojame už supratingumą.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 13 450 mm, bendras plotis: 4 135 mm, bendras ilgis: 3 092 mm, keliamoji galia vienai sandėliavimo sekcijai: 400 kg, įėjimo įtampa: 400 V, keliamoji galia: 400 kg, Automated Warehouse Optimization Storage System Schäfer Logimat System Type: Logimat 3625 – 815 – 13,450/400 Serial No.: 916.0480-B2 (Logimat 5) Year of manufacture: 2016 Total load capacity: 2 x 30,000 kg Load per tray: 400 kg (evenly distributed) Tray dimensions: 3625 x 815 mm Number of trays (approx.): 91 units Touchscreen: 15.6 inch Shuttle dimensions (W x D x H): 4135 x 3092 x 13,450 mm Power supply: 400V-50Hz, 3L/N/PE, 24 A, 17 kVA This offer is valid while the system is still available Technical specifications for each Logimat: – Maximum total capacity of Schäfer Logimat: 2 x 30,000 kg – Maximum tray capacity (approx.): 91 trays, 400 kg each, evenly distributed – Tray dimensions: 3625 x 815 x 100 mm Nwjdjru A Atepfx Aghep – Tray dead weight: 70 kg – Machine dimensions (W x D x H): 4135 x 3092 x 13,450 mm – System footprint (approx.): 12.8 m² – Capacity with 91 trays: approx. 269 m², each tray approx. 2.95 m² – Average tray retrieval time: 26 sec – Maximum tray retrieval time: 26 sec – Average tray exchange time: 51 sec – Maximum tray exchange time: 72 sec – Machine weight without trays: 5200 kg – Equipped with LogiTilt – Equipped with LogiPointer – Equipped with LogiGate – Equipped with LogiStainless Machines have been professionally dismantled and can be reassembled by the same technicians if required. Photos and videos of operation and dismantling available upon request by email. Price: special export price Price: excl. VAT Availability: in stock We have 3 Schäfer Logimat units in stock Machinehandel De Leeuw BV specializes in used paternoster systems, including Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Gamybos metai: 1976, Sąlyga: Defektas atsarginių dalių laikiklis (naudotas), Manufacturer: Ahrens Year of manufacture: 1976 Model: 206 Z Technical Data: Sheet width: 1000 mm Sheet thickness: 0.7 mm Driven forming stations: 12 units Shaft diameter: 55 mm Drive power: 55 kW Entry width: 1100 mm Frame-to-frame distance: 650 mm Dimensions of individual components: Roller table 1: 6,000 x 1,700 x 1,700 mm Roller table 2: 6,000 x 1,700 x 1,700 mm Drive unit 1: 3,800 x 1,000 x 1,500 mm Drive unit 2: 6,300 x 1,000 x 1,500 mm Decoiler: 3,000 x 1,300 x 1,600 mm Shear: 1,700 x 650 x 1,000 mm Euro pallet: 1,200 x 800 x 1,200 mm The complete machine requires 2 trucks for transport! Accessories / Special equipment: Uncoiling decoiler Profile shear Note: The control cabinet is missing. The machine is therefore not operational. Nwodpfsg Ul S Dox Aghop The machine serves as a base assembly for roof trapezoidal profiles with high ribbing.

Sąlyga: naujas, Gamybos metai: 2024, SEMI-AUTOMATIC DRILLING SYSTEM “UNIBOHRFIX 50” With the UniBohrFix 50 drilling system, all profiles can be processed either against a stop or using the gripper clamp. Drilling is performed manually via a lever, while materials are automatically positioned to the next drilling location along the X-axis. Conveniently execute entire drilling programs, or use the stop plate for rapid single hole operations. The system is suitable for weights up to 100 kg. Additionally, the unit includes a minimum quantity spray unit with holder and spray can. For technical specifications of the standard version, refer to the table. All system components can be configured to your requirements. You may choose from various drill units, roller conveyors, positioning systems, and vices. Plantec configures the system to fit your needs perfectly! ADVANTAGES - Series of holes are drilled at precise intervals automatically. - Operating errors are drastically reduced. - Programming takes only a few minutes. Nwedpfx Ajgwt Sloghsp - Excellent price-performance ratio. - Significant reduction in required labor. Standard measuring lengths: 3,000 mm 6,000 mm Drill unit: Unimax 2 T Spindle: MK2 Continuous drilling capacity: 18 mm Speed ranges: 100-2000 rpm, 200-4000 rpm Throat depth: 225 mm Distance spindle/table: 60-400 mm Adjustable vice with linear measurement readout Positioning length stop: PD-100e Control for automatic positioning Positioning: absolute or incremental Easily readable LED display Carriage with DC servo motor Positioning accuracy: +/- 0.1 mm/m Stop arm with spring dampening Stop plate with groove Programmable controller with 3,000 memory slots Roller conveyors: RD-200/3 Load capacity: 200 kg/m Roller width: 290 mm Roller diameter: 40 / 50 mm Insert plates Bracing for stabilization Control cabinet Available options: - Minimum quantity spray system with spray head and holder - Gripper clamp for securing material to the stop plate

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, Wir können es nicht in der Produktion einsetzen, daher der Verkauf. Njdpfx Asrq A Sxsghjwp

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 500 mm, padavimo eiga Y ašimi: 250 mm, padavimo ilgis Z ašis: 160 mm, X ašies eiga: 500 mm, Y ašies eiga: 250 mm, Z ašies eigos atstumas: 480 mm, veleno greitis (maks.): 9 000 aps./min, X ašies padavimo greitis: 2 m/min, Y ašies padavimo greitis: 2 m/min, padavimo greitis Z ašis: 1 m/min, veleno greitis (min.): 100 aps./min, plunksnos brūkšnys: 160 mm, stalo plotis: 320 mm, stalo ilgis: 880 mm, X-500, Y-250, Z quill stroke 160 mm, W axis (machine head travel) 480 mm, table 880 x 320 mm, max. load 320 kg, spindle taper SF 32, 100–9000 rpm, 5 kW, 60 Nm, Heidenhain TNC 124. Extensive accessories included. Nwodsq R Rb Hspfx Aghsp

Sąlyga: visiškai atnaujintas (naudotas), Portal Straightening Press Pressing Force: 450 t Njdpfx Asfcnu Ijghswp Stroke: 50 mm Daylight Opening: 1000 mm Working Area: - Length: 5200 mm - Width: 2300 mm - Height: 1000 mm Weight: 45,000 kg Screw Distance (Left-Right): 1000 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, varžto skersmuo: 38 mm, This machine is in storage at Plastima Used Machinery. Nwedovcqccspfx Aghep

Sąlyga: geras (naudotas), Gamybos metai: 2004, bendras svoris: 40 000 kg, spaudimo jėga: 450 t, AXIAL 4100x450t + Cybelec ModEva 10 + 5 axes (Y1, Y2, X, R, Z) + WILA CNC crowning table + WILA hydraulic punch and die clamping Bending length: 4,100 mm Pressing force: 450 t Stroke: 365 mm Axes: 5 axes (Y1, Y2, X, R, Z) *Z axis (supports with double prismatic guide) WILA hydraulic punch and die clamping system WILA CNC crowning table Operating speeds: Approach speed: 110 mm/sec Working speed: 8 mm/sec Return speed: 90 mm/sec Distance between uprights: 3,600 mm Throat depth: 410 mm Opening between table and ram: 500 mm Pit penetration: 975 mm CNC: Cybelec ModEva 10 (New control CPU from September 2023) Nwedpfx Agju Au U Tjhjp Safety laser: DSP LASER - TX Weight: 40 t Motor power: 30 kW

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, bendras svoris: 1 195 kg, tūrio srautas: 7,25 m³/val, darbinis slėgis: 13 juosta, įėjimo įtampa: 400 V, ATLAS COPCO GA 37 VSD ff Screw Compressor Variable speed drive (inverter controlled) Equipped with a refrigerant dryer 37 kW motor Output: 7.25 m³/min Nwedpfst Hdh Nox Aghsp Pressure: 13 bar Operating hours: 13,200 h The compressor is fully operational