šakinis krautuvas

Kalmar DCG150-6

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2017, veikimo valandos: 15 799 h, keliamoji galia: 15 000 kg, kėlimo aukštis: 3 070 mm, laisvas kėlimas: 1 500 mm, kuro tipas: dyzelinas, stiebo tipas: dupleksas, statybinis aukštis: 3 200 mm, šakių laikiklio plotis: 2 500 mm, tuščias svoris: 19 100 kg, bendras ilgis: 5 000 mm, pavaros tipas: Diesel, statybos plotis: 2 300 mm, Diesel Forklift Load Center: 600 mm Mast Type: Duplex Condition: Ready for operation and fully functional Technical Condition: very good Front Tyres Type: Superelastic Front Tyres Size: 12.00-20 Rear Tyres Type: Superelastic Rear Tyres Size: 12.00-20 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our homepage – sago-online. Lease-purchase and financing on favourable terms are always possible for us. We are also happy to buy your used machine outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail regarding this DCG150-6. Tedpfexxnmmsx Aa Dea P.S.: Our master forklift workshop specialises in repair, maintenance, overhaul, and custom modifications for forklifts from 8 t upwards. We are also happy to display your vehicle for commission sale at our premises. Sideshift, fork positioner, heater, full cab, full free lift, rotating seat

Būklė: naudotas, Gamybos metai: 2008, Ratų skersmuo - maks. 700 mm Modulis - maks. 10 (18) Modulis - min. 1 Stalo skersmuo 530 mm Stalo apsukos maks. 350 1/min Tsdpfxjyv Ipfe Aa Dsa Ašių atstumas 50 - 680 mm Ruoinio svoris 4 000 kg Ašinė eiga 1 000 mm Tangentinė reguliacija 300 mm Pasukimo kampas maks. +/- 45 laipsnių Variklio galia 32 kW Veleno apsukos 3 500 - 12 000 aps./min Įrankio skersmuo 320 mm Bendras galios poreikis 80 kW Mašinos svoris apie 25,00 t

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2013, veikimo valandos: 15 554 h, keliamoji galia: 15 000 kg, kėlimo aukštis: 5 500 mm, kuro tipas: dyzelinas, stiebo tipas: simpleksas, statybinis aukštis: 4 445 mm, šakių laikiklio plotis: 2 500 mm, šakių ilgis: 2 400 mm, tuščias svoris: 18 400 kg, bendras ilgis: 5 055 mm, pavaros tipas: Diesel, statybos plotis: 2 550 mm, Diesel forklift Load center: 600 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 12.00-20 Rear tires type: Superelastic Todpfx Aju Dzkkea Dja Rear tires size: 12.00-20 Description: In addition to this Kalmar model, we have approximately 200 more heavy-duty forklifts, compact forklifts, standard forklifts & side loaders in our warehouses in Hamburg and Gdańsk. Visit our website – sago-online. Leasing & financing at favorable terms are always possible. We are also happy to purchase your used machine outright, even if you are not buying a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice regarding this DCG 150-6. P.S.: Our master workshop specializes in repair, maintenance, overhaul and custom construction for forklifts from 8 tons and up. We can also offer your vehicle for commission sale at our location. Side shifter, fork positioner, Heating, full cabin,

Būklė: naudotas, Gamybos metai: 2017, veikimo valandos: 17 185 h, kuro tipas: dyzelinas, pavaros tipas: automatinis, Įranga: galvos apsauga, kabina,

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, X ašies eiga: 760 mm, Y ašies eiga: 510 mm, Z ašies eigos atstumas: 570 mm, ruošinio aukštis (maks.): 520 mm, ruošinio svoris (maks.): 300 kg, įrankių magazino lizdų skaičius: 34, bendras aukštis: 2 935 mm, bendras ilgis: 3 600 mm, bendras plotis: 3 700 mm, stalo plotis: 860 mm, valdiklio modelis: FANUC, aušinimo skysčio tiekimas: 12 juosta, atstumas nuo stalo centro iki veleno galo: 780 mm, ašies variklio galia: 15 W, greitasis eiga Z ašyje: 40 m/min, greitas poslinkis X ašimi: 40 m/min, greitas poslinkis Y ašis: 40 m/min, veleno nosis: ISO 40, veleno greitis (maks.): 10 000 aps./min, veleno greitis (min.): 80 aps./min, stalo aukštis: 560 mm, stalo apkrova: 300 kg, įrankio skersmuo: 80 mm, įrankio ilgis: 300 mm, įrankio svoris: 8 g, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Vertical machining center with automatic pallet changer "DOOSAN mod. VC500" equipped with Fanuc 21i-MB CNC Todpfju T Hg Tsx Aa Dsa

Gamybos metai: 1999, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition, equipped with a tool lift system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Tool holder in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by the machine body of the tool tray) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Tedpfor A Hcbox Aa Dsa Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine dimensions (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt, 50 Hz Connected load: 9 kW Equipment: • The machine has an electric control for the broaching stroke movement with both manual and automatic operation. • Integrated coolant/lubrication system • Tool lift system for flat broaching tools (no automatic feed) • The broaching slide with pull head holder is equipped with flat guides on both sides Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg) • Complete machine documentation, including CE declaration of conformity Remarks: The machine is ideal for manufacturing keyway slots. Thanks to its robust machine bed and the integrated tool lift system, it is especially well-suited for quick and easy use of flat broaching tools. The machine has had very limited use and is in near-new condition. The machine is available for inspection at our warehouse and can be demonstrated under power. Our direct contact details and further information about the machine can be found in the attached PDF document.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2006, X ašies eiga: 5 500 mm, Y ašies eiga: 1 400 mm, Z ašies eigos atstumas: 1 000 mm, veleno greitis (maks.): 5 000 aps./min, veleno greitis (min.): 15 aps./min, stalo plotis: 1 200 mm, stalo ilgis: 6 000 mm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Machine year of manufacture: 2006 Capacities / Travel distances: Longitudinal (X): mm 5,500 Vertical (Y): mm 1,400 Transverse (Z): mm 1,000 Clamping table: Length: mm 6,000 Width: mm 1,200 Number of T-slots on table surface: qty 12 T-slot width: mm 22 Distance between slots: mm 100 Maximum workpiece weight: kg 13,500 NC Rotary Table: Position: right, flush-integrated in table surface Clamping surface: Ø mm 1,000 Positioning accuracy: ° 360x0.001 Todpfjy Tkgbex Aa Dsa Maximum workpiece weight: kg 3,500 Number of T-slots: qty 9 T-slot size: mm 22 T-slot spacing: mm 100 Paintwork: RAL 7035 light grey / RAL 5011 steel blue Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle kW 28 Spindle speed range: Spindle speed: min⁻¹ 15 – 5,000 Torque: Nm 815 Feeds: X, Y and Z-axis mm/min 2 – 10,000 Max. rapid traverse speed: X, Y and Z-axis mm/min 25,000 Max. feed force: N 10,000 Footprint FLC6000: m (approx.) 11.0 x 5.6 Total height: m (approx.) 3.5 Weight: kg approx. 35,000 HEIDENHAIN iTNC 530 HSCI Automatic MTE diagonal milling head Automatic tool changer Chip conveyor Coolant system with 70 bar & (internal coolant supply) RepairFIT is our proven solution for a profitable entry into our product lines. Machines available in this series are procured by us via a strict selection process and subjected to a comprehensive inspection (deep-dive check). Following intensive cleaning, all detected, apparent faults and defects are professionally repaired by our experienced service team.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, Indeksuojamas stalas 400 mm rankinis Komplekte yra įrankiai Stalo skylė: 10 - 130 mm Raktų plotis: nuo 2 iki 32 mm Tjdjxclfzjpfx Aa Dsa Padavimo greitis: 0,5 - 5 m/min; Stalo skersmuo Ø: 690 x 460 mm Stalo apkrova: 2000 kg Stūmoklio eiga: 0 - 425 mm Ilgis: 1300 mm Plotis: 1100 mm Aukštis: 1400 mm Svoris: 1800 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, tekėjimo ilgis: 700 mm, X ašies eiga: 205 mm, Z ašies eigos atstumas: 700 mm, ašies variklio galia: 22 000 W, bendras aukštis: 2 800 mm, bendras ilgis: 6 000 mm, bendras plotis: 3 900 mm, bendras svoris: 9 800 kg, Complete machining with dual spindle, upper and lower turret Kitagawa 3-jaw chuck left and right Tool holders with driven tools, axial and radial Large jaw cabinet with inserts Tsdpfx Aasyn Em Rj Dsa OGL gantry loader with approx. 10 kg payload capacity Chip conveyor Paper band filtration system with pressure tank Maximum turning diameter: 400 mm X-axis travel: 205 mm Z-axis travel: 700 mm Spindle bore: 62 mm Spindle speed: 6000 rpm Spindle motor power: 22 kW Counter spindle speed: 6000 rpm Counter spindle through-hole: 62 mm Counter spindle motor power: 15 kW Tool changer: 16 positions Driven tool speed: 6000 rpm Lower turret positions: 16 Driven tool speed: 6000 rpm Driven tool motor power: 7 kW Chip conveyor: yes Tool eye: yes Length: 6000 mm Width: 3900 mm Height: 2800 mm Weight: 9800 kg Please note: The information on this page has been provided by us and, wherever possible, obtained from the manufacturer, to the best of our knowledge and belief. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are implied. We recommend verifying all critical details independently.

Būklė: naudotas, Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 06007153/001, bendras aukštis: 6 050 mm, bendras plotis: 3 380 mm, bendras ilgis: 3 074 mm, keliamoji galia vienai sandėliavimo sekcijai: 210 kg, statybinis aukštis: 6 050 mm, įėjimo įtampa: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: 06007153/001 Year of Construction: 2006 Total Load: 2 x 33,550 kg Load per Tray (Medium): 205 kg (evenly distributed) Tray Dimensions: 3050 x 864 mm Number of Trays: 36 units (more or heavier trays available upon request) Dimensions Shuttle W x D x H: 3380 x 3074 x 6050 mm (height of Kardex adjustable to available height) Power Supply: 3/N/PE400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid provided the system has not been sold Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed, more or heavier trays available upon request - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Capacity with 36 trays: approx. 95 m², each tray is approx. 2.64 m² - Electronic volume measurement system in 25 mm increments (grid) - Access opening with sliding doors for personnel and goods protection - Control C2000, with B/W OP2000 display - LED anti-glare lighting above the access point - Use of toothed-belt drive for minimum noise - Use of toothed-belt for fastest order picking - Shelf distance adjustable in 25 mm increments via support profiles, prerequisites for high-density storage - Integrated weight management controls tray weight - Including light pointer Price: On request, inquiries via email only Price: excl. VAT, including transport and installation Delivery time: from stock Todpfjxq Tbtjx Aa Dea Machinehandel De Leeuw BV specializes in pre-owned paternoster systems from, among others, Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands