Pakraukite judančias pačiūžas, mašinėlę

HTS ECO-Skate IDEAL i60L und i60S, 12to Tragl./cap.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 5 650 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 243-0011, CNC SWISS-TYPE AUTOMATIC LATHE TORNOS EVODECO 16/10 with LNS Bar Loader Fanuc 31iB – 5,646 operating hours Country of Manufacture: CH Voltage: 400V Dimensions: 2135 x 1250 x 2114 mm Net weight: 2,700 kg TECHNICAL DATA Number of axes: 10 Number of spindles: 2 Main spindle Maximum bar diameter: 16 mm Maximum machining length: 180 mm Spindle speed: 12,000 rpm Kjdpskhnqgefx Af Ijwt Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Sub-spindle Maximum bar diameter: 16 mm Spindle speed: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Tool set 1 Number of positions: 5 Number of driven positions: 3 Speed of driven tools: 8,000 rpm Tool set 2 Number of positions: 5 Number of driven positions: 3 Speed of driven tools: 8,000 rpm End unit Number of positions: 4 Number of driven positions: 3 Speed of driven tools: 8,000 rpm Subsequent machining Number of positions: 6 Number of driven positions: 6 Speed of driven tools: 8,000 rpm Electrical supply Mains voltage: 400 V All technical specifications are provided subject to errors and omissions.

Gamybos metai: 1971, Sąlyga: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 713406, -KOM 105- Offered here is a high-performance industrial grinding machine from Kehren & Co, equipped with a paper band filtration system from FAUDI. This is a segment grinding machine with vertical grinding spindle. The machine is fitted with 2 grinding tables/magnetic chucks for pendulum processing. Technical specifications: Segment Grinding Machine: Manufacturer: Kehren & Co Model: D7B Year of manufacture: 1971 Serial no.: 713406 Kodpfjg Nt A Esx Af Iewt 2 grinding tables/magnetic chucks, each with 700 mm diameter Grinding method: segment grinding Control: Marposs Weight: 6,600 kg Paper Band Filtration System: Manufacturer: Faudi - Filtersysteme Model: AFB 1.3 / 1001 Year of manufacture: 1992

Gamybos metai: 2023, Sąlyga: naujas, On-site nitrogen generation system for producing a wide range of purities, pressures, and flow rates. The system consists of high-quality components, such as filters, adsorbers, and nitrogen separation units from Parker Hannifin, as well as compressors from renowned manufacturer Kaeser. If you require high-pressure compression, we cooperate with Bauer Kompressoren. Over 400 systems have already been installed for our customers. Kedpfonq Di Tjx Af Iswt All systems are assembled by us and customized to your spatial requirements and specific needs. We also design and implement containerized systems for both indoor and outdoor installation. We look forward to your inquiries...

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2010, keliamoji galia: 200 kg, rankos pasiekiamumas: 2 400 mm, PLC Merkezi olarak, stoklarımızda bulunan endüstriyel robotlarımız ile bu örnekteki gibi özel mühendislik projeleri gerçekleştirebiliriz. Size aşağıdaki konularda destek olabiliriz: - Kaynak - Kesme - Makine Besleme - Paletleme - Depaletleme - Mermer İşleme - Abkant Makinesi Besleme ve Metal Bükme - Ve daha birçok proje Marka: KUKA Model: KR200-3 Comp Durum: 1 yıl garantili, revize edilmiş Versiyon: V5.6.12 Yıl: 2010 Kontrol Kabini: KRC2 ed 05 Nominal Taşıma Kapasitesi: 200kg Erişim Mesafesi: 2400mm Dahil Olanlar: Manipülatör + Kontrol Kabini + Tüm Kablo Setleri + Teach Pendant + 1 Hertz Spindle Motor (Yeni) + Delta Spindle (Mekanik Sistem ile Takım Halinde) + Takım Değiştirici Tabla Kodpfx Afsq Dpxdo Iswt Dahil Olmayanlar: 7. Eksen, Mühendislik Tasarımı ve Danışmanlık Nakliye: Fiyata DAHİL DEĞİLDİR Ödeme: Teslimattan önce %100 ödeme

Sąlyga: geras (naudotas), Robotas Gamintojas: Staeubli Tipas: RX170 22126ä Kwjdpfsbrhtdjx Af Ijt

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, veikimo valandos: 52 455 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2501-0154, tekėjimo ilgis: 600 mm, sukimosi skersmuo virš skersinio stumduko: 140 mm, tekėjimo skersmuo: 300 mm, ašies variklio galia: 25 000 W, veleno greitis (min.): 5 000 aps./min, veleno greitis (maks.): 5 000 aps./min, Z ašies eigos atstumas: 900 mm, greitas poslinkis X ašimi: 3 m/min, greitas poslinkis Y ašis: 3 m/min, greitasis eiga Z ašyje: 3 m/min, sukimosi greitis (maks.): 4 000 aps./min, sukimosi greitis (min.): 4 000 aps./min, sukimo momentas: 239 Nm, strypo praėjimas: 80 mm, X ašies padavimo greitis: 165 m/min, Y ašies padavimo greitis: 165 m/min, padavimo greitis Z ašis: 220 m/min, bendras svoris: 10 500 kg, Įranga: dokumentacija / vadovas, The machine is still in use and can be viewed in operation at VOVU Machining in Uden. A total of 6 identical machines are available here. Equipped with Fanuc 310iS control. Kwjdpfxsur Hfzs Af Ijt

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 600 mm, įėjimo įtampa: 400 V, bendras svoris: 3 560 kg, ruošinio aukštis (maks.): 170 mm, The fast deburring machine for deburring, edge rounding, and finishing steel parts up to 600 mm wide. This deburring and finishing machine from Q-Fin has been specifically developed for applying a large radius of up to 2 mm to steel sheet. With the SER600 Super Edge Rounder from Q-Fin, it is possible to deburr, grind, edge-break, round, descale, remove oxidation layer, or apply a linear finish to sheet metal parts up to 600 mm in width. A combination of these operations is also possible. The throughput rate of the SER600 is 3 to 5 times higher than that of comparable machines. This new 2025 model is equipped with a magnetic support and is therefore suitable for processing steel cut parts and other magnetic materials. The machine features 5 processing stations. Operation is conveniently controlled via an HMI touchscreen on the front of the machine. The first station of the SER600 consists of a grinding unit. The abrasive belt in this station removes burrs and/or discoloration from the product surface. If there are no burrs present, the grinding belt can be omitted or removed. It is also possible to use a finer grinding belt or finish with a Scotch-Brite belt. The second and third stations consist of a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations are fitted with 2 round brushes rotating in opposite directions. These brushes are used to remove sharp edges from the product by breaking edges or, through the unique combination of two brush systems, by creating a radius of up to R=3 mm. By installing special brushes, the SER600 with magnetic system is also ideally suited for removing the oxide layer from steel products or slag from plasma-cut products. We offer the machine in combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set'. The WES6000 was developed by Q-Fin to safely extract grinding dust without loss of suction. This fully stainless steel extraction system operates wet, extracting grinding dust from stainless steel, steel, and aluminium, thus eliminating fire and explosion hazards. According to Q-Fin, it is the safest, simplest, and most sustainable method of extracting grinding dust. With the WES6000, there is no longer any grinding dust in the air and/or the working environment. We currently have 2 units of the SER600 in stock: Kwsdsl Dw D Espfx Af Ijt - 1x new (Year of manufacture: 2025) - 1x only a few months old, like new (Year of manufacture: 2024) The machines can be inspected by appointment in Bergeijk. Both machines come with a 1-year warranty on the construction and all non-wear parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. - Electrical connection of the SER600: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Sąlyga: naujas, Gamybos metai: 2024, slėgis: 8 juosta, Mitre adjustment horizontal 15°–90°–15° continuously variable, Saw motor 5.50 kW (400 Volt), Saw blade 600 mm, travel range rear stop 180 mm, working height adjustable from 940 to 1000 mm via leveling feet, 2 x extraction connections (top in hood and bottom), net weight 600 kg, dimensions (W x D x H): 135 x 140 x 150 cm, RAL 9007 grey aluminium. Turntable made from ground nickel-steel. Saw head with ball-type linear guides, offering high accuracy, long service life, and maximum rigidity. Saw material can be pre-clamped under low pressure when the hood is open. Hydropneumatic blade feed. Chip removal directed toward extraction hood. Kjdpfsgwt S Tjx Af Ijwt Equipment • Precision underfloor circular saw • Mitre adjustment continuously variable at 0º/45º/90º/–45º/–60º • Including 2 pneumatic clamps (vertical) • Saw blade feed infinitely adjustable • Two-hand safety control • Adjustable rear material stop • Chip extraction device • Mist spray unit for air-oil cooling • Air gun with spiral hose • Including maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade 600 mm • Saw blade not included in scope of delivery! Our NC pusher system ensures that your workpieces are positioned at the desired processing position on our UK 600 HA 90°. A gripper clamps the material, and the NC control positions the material automatically. The clamping and sawing process is then triggered. The positions are programmed into the controller beforehand. Once the machine has finished processing, it automatically moves to the next saw position. Depending on the workpiece, multiple parts can be clamped side by side or stacked and positioned simultaneously. You are welcome to inspect the system at any time in our manufacturing or demonstration hall. Please feel free to contact us for more information. Plantec Maschinen GmbH

Sąlyga: naudotas, Gamybos metai: 1970, Pressure: 63 t Throat depth: 250 mm Stroke: 8-100 mm Table depth: 710 mm Table width: 500 mm Kjdpfx Afecxxx Hs Iowt Ram dimensions: 450x280 mm Ram adjustment: 63 mm Strokes per minute: 140 Total power requirement: 7 kW Machine weight approx.: 3.5 t

Sąlyga: naudotas, Gamybos metai: 2009, Offered here is a used machining centre from the manufacturer Deckel Maho DMG. The machine is under power and can be inspected in our facility. Free loading onto truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Kwsdpfx Ajw Ew T Sof Iet Control system: Siemens 840 D Solutionline (PCU 50) Technical data: Travel X-, Y-, Z-axis: 1250 x 1000 x 1000 mm Feed rate X-, Y-, Z-axis: 20 - 60,000 mm/min Rapid traverse X-, Y-, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 °/min Maximum table rotation: 30 rpm Spindle speed: 20 - 8,000 rpm Gear steps: 2 Maximum workpiece diameter: 1250 mm Maximum workpiece height: 1580 mm Clamping surface: 800 x 800 mm Maximum workpiece weight: 1,500 kg Pallet weight: 570 kg Maximum allowable pallet load difference: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Space requirement: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Accessories: Chip conveyor with coolant tank Coolant system 4x machine pallets Tool magazine Oil mist extraction system Various new spare parts: 1x Length measuring system Y-axis (new) 1x Lubrication unit 230V 0.12 30bar (new) 1x GEAR UNIT P-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox*F1C-A25 (new) 1x Retrofit kit power module (new) 1x Lifting devices for the machine