Paviršiaus šlifavimo mašina

JUNG JF 520

Sąlyga: geras (naudotas), Gamybos metai: 1980, veikimo valandos: 15 393 h, Funkcionalumas: visiškai funkcionalus, šlifavimo ilgis: 600 mm, Please provide your offer price. Sales only within Europe, including Turkey. Price excluding packaging; Delivery terms: FCA (machine location) ===== Rodsxru H Tepfx Agiop For technical specifications, please refer to the attached handout. All warranty and guarantee rights are excluded. We do not assume any responsibility for the accuracy of the technical data and year of manufacture, the completeness of accessories and tool equipment, or compliance with all safety and environmental protection requirements specified in accident prevention regulations. No sales to private individuals.

Sąlyga: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Rjdpfx Aju Aa I Sogisp Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, šlifavimo ilgis: 600 mm, šlifavimo plotis: 250 mm, šlifavimo disko skersmuo: 250 mm, JUNG JF520 / JF525 SPM-X mechanically, geometrically, and electrically overhauled according to JUNG’s new machine protocol Rsdpfxjbwl Uhs Agijp with a new SIEMENS control system (12" Touch OP) incorporating our 25 years of experience in the overhaul of JUNG machines - new control cabinet with holding force regulation and thyristor control for main spindle motor - control system upgrade with 12" SIEMENS touch-OP cycle control and highly intuitive operator panel - remote maintenance module available as an option - plain-text fault display (multilingual) - electromechanical stepper motor infeed with programmable automatic retraction - roughing/finishing infeed - spark-out strokes selectable in advance - dressing compensation - plunge grinding cycles - automatic central lubrication - all numerical values (infeed) and on/off functions (such as hydraulics and coolant) can be set directly via touch panel - all analog functions such as spindle speed, holding force, cross feed speed, and grinding functions are directly accessible to the operator via rotary and toggle switches - comes with 12 months warranty Maximum magnet size: 600 x 200 mm (Standard: 500 x 200 mm) Maximum grinding area: 600 x 250 mm Delivery time: approx. 10–12 weeks We are happy to accept your used JUNG grinding machine in part exchange

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3806, šlifavimo ilgis: 600 mm, šlifavimo plotis: 250 mm, šlifavimo disko skersmuo: 250 mm, šlifavimo veleno greitis: 3 000 aps./min, galia: 3,5 kW (4,76 AG), Įranga: sūkių greitis be galo kintamas, JUNG JF520 – workshop-refurbished Mechanically and electrically inspected and function-tested by our JUNG specialists Wearing parts replaced Geometry overhauled according to the JUNG new machine protocol - Grinding area: 600 x 250 mm - Stepper motor infeed - 3-axis HEIDENHAIN digital readout - Dressing compensation - Magnetic force control - Automatic central lubrication - Used magnetic chuck - Used paper band filter 6 weeks parts warranty Delivery time: short-term Redpswz Hf Nefx Agiep We are happy to accept your used JUNG grinding machine as trade-in.

Sąlyga: naujas, Suction capacity at filter unit nozzle*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Rodoh Rdwxjpfx Agisp Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or special colours available on request Application: Extraction of oil mist and smoke, suitable for small to very large machine workspaces | Oil mist separator Advantages of the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC as standard (digital filter control) - Electronically regulated EC fan as standard - Adjustable speed and air flow - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of air flow capacities available - Can be adapted to pollutant load and air flow requirements - Extensive range of installation and connection accessories - Quality Made in Germany We developed the ELBARON® filter series for use in metalworking with straight oil or for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most powerful filters on the market and are used worldwide. Our filter units are already fully digitalized as standard and can, for example, be controlled via laptop. The ELBARON® product range includes 18 device variants and can be optimally configured in terms of size and capacity for your specific application. ELBARON® units impress with long service life and total operational reliability. Our electrostatic filter cells are dimensioned to provide the best possible filtration efficiency, service life, and trouble-free operation while maintaining economic efficiency.

Gamybos metai: 1989, Sąlyga: paruoštas naudoti (naudotas), Table dimensions X/Y: 600mm/200mm, Grinding dimensions X/Y: 600mm/250mm, Magnet dimensions X/Y: 600mm/200mm, Grinding wheel diameter: 225mm, Grinding wheel width: 25mm, Grinding wheel bore: 51mm, Spindle center–table distance: 350mm (+/-50mm), Table feed: 20m/min, Creep feed: 0mm/500mm/min, Speed: 4200rpm, Machine dimensions X/Y/Z: approx. 2700mm/2100mm/2100mm, Weight: approx. 2500kg. An on-site inspection is possible. Redpfxov Exrwe Agiep

Sąlyga: geras (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, Jung JF 520 MS Redsydd S Dspfx Agijp 1987 magnetas 175 x 450 mm maks. šlifavimo sritis 600 x 220 mm kintama magnetinė galia kintamas apsisukimų dažnis šnypštus šlifavimas automatinis padavimas griovelių ir plokštumų šlifavimui diaform 4x šlifavimo flanšas su akmeniu dokumentacija staklės prijungtos prie elektros patikrinimui.

Sąlyga: naudotas, Gamybos metai: 2013, Technical details: X-axis travel: 760 mm Y-axis travel: 460 mm Z-axis travel: 460 mm Control: Heidenhain TNC 620 Power-on hours: 20,246 h Spindle operating hours: 7,724 h Spindle speed: 12,000 rpm Spindle torque: 75 - 95 Nm Spindle taper: SK40 Rodpjvhbpdjfx Agiop Tool magazine with: 24 slots Table size: 900 x 410 mm Max. table load: 350 kg Feed rate range: n/a Rapid traverse: 36 m/min Interface: RS232 Control voltage: 24 DC V Compressed air connection: 6 / 8 bar Total power requirement: 20 kVA Machine weight approx.: 6.0 t Cooling unit dimensions: 1.7 x 0.7 x 1.35 m Machine dimensions (LxWxH) approx.: 1.9 x 2.3 x 2.45 m TNC620 (contouring control with up to 5 controlled axes, especially suitable for universal milling), can be integrated into a network Safety doors with impact-resistant plastic windows Chip conveyor Hydraulic unit Coolant treatment system Rittal cooling system on the control cabinet Work area interior lighting Hand control device

Sąlyga: naujas, We supply all spare and wear parts for the JUNG JF and HF series. For example: grinding wheel flanges, switches, bellows, splash guards, replacement grinding spindles, cross spindles, piston rods, etc. Additionally, we offer accessories such as magnetic chucks (new or refurbished), dressers, paper band filters, slideway oil, lubrication pumps, etc. Also available: used parts that are no longer manufactured by the OEM. Redpegbt U Nofx Agiep When making inquiries, please specify the exact designation of the part.

Gamybos metai: 2022, Sąlyga: visiškai atnaujintas (naudotas), Overhauled dresser for all JUNG HF and JF models available on an exchange basis. Assembly can also be provided upon request. Redpfxjhyudfo Agijp Please specify the exact machine type when making an inquiry. We will supply the overhauled dresser and you return the defective part to us.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3595, Dear Sir or Madam, For sale is a Weiler Commodor B lathe from year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop. Among other things, the main spindle bearings as well as the lead/feed screw bearings have been completely replaced! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify on site. Availability: on request Machine no.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Possible threads: Metric, Imperial, Module, Diametral-Pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, removable chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various clamping jaws... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected Redpfx Aethd Shjgiep - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can carry out a complete or partial overhaul of the selected machine - Upon request, we can repaint the selected machine in your preferred color - Upon request, you can order additional accessories such as tools directly - Upon request, we can also install further accessories, such as safety equipment - We are happy to take care of shipping and/or installation

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, INFORMACIJA APIE PRECIZINĮ PLOKŠČIAGRINDŽIAVIMO STAKLES Gamintojas: JUNG Modelis: JF 520 Metai: 1997 Staklių svoris: 2200 kg Bendras svoris: 2600 kg Rjdpfx Agexqa I Teiep Vieta: Haiger Kaina: 24 000 € be PVM. Aprašymas: Serijos Nr. 3821, skaitmeninis ekranas (Heidenhain), mikroprocesorinis valdymas, profilio formavimo įrankis (Diaform), staklių apšvietimas, aušinimo skysčio sistema, magnetinis prispaudimo stalas. Techniniai duomenys: Tvirtinimo paviršius (I x P, mm): 600 x 200 Apdirbamas paviršius (I x P, mm): 600 x 250 Maks. magneto dydis, mm: 600 x 200 Didžiausi šlifavimo disko matmenys, mm: 225 x 25 x 51 Atstumas nuo stalo iki ašies vidurio, mm: 350 (+50) Stalo išilginis suvartymas, m/min: 1 – 20 Lėtasis bėgimas, mm/min: 0 – 500 Šlifavimo ašies greitis, aps./min: 800 – 4200 Galia kW (lėtu režimu): 2,2 (3,5)

Sąlyga: visiškai atnaujintas (naudotas), šlifavimo ilgis: 600 mm, šlifavimo plotis: 200 mm, šlifavimo ilgis 600 mm šlifavimo plotis 200 mm elektromagnetinė plokštė 450×175 mm X eiga 660 mm Z eiga 225 mm šlifavimo disko matmenys 250x25x51 mm Valdymas Jung TouchScreen Rsdpfx Agoxal Hysiep svoris apie 3000 kg

Gamybos metai: 2012, Sąlyga: geras (naudotas), Muratec MW120 GT eladó Rjdpfx Aeifi D Togiop Használt, kiváló állapotban. A gép előzetes egyeztetés alapján megtekinthető. A szállítás a vevő felelőssége, de igény esetén segítünk a csomagolásban és a rakodásban. Szállítás: EXW Székesfehérvár

Sąlyga: naudotas, Gamybos metai: 1985, Grinding length: 600 mm Grinding width: 200 mm Total power requirement: 7.5 kW Machine weight approx. 2.3 t O F F E R We can offer you, subject to prior sale and errors excepted, from stock on a non-binding basis: JUNG Horizontal Precision Surface & Profile Grinding Machine with Microprocessor Control Model: JF 520 MS Year of manufacture: 1985 2225 ----- Max. grinding length (table longitudinal travel): 600 mm Max. grinding width (cross travel): 200 mm Max. grinding height under the wheel approx.: 230 mm Max. distance table to spindle centre: 500 mm Magnetic chuck size: 500 x 200 mm Max. table load: 100 kg Table speed: 1 – 24 m/min Table speed, creep grinding: 5 – 450 mm/min Max. table cross feed: 1,000 mm/min Max. vertical feed grinding head: 500 mm/min Grinding wheel dimension: 250 x 25 x 50.8 mm Max. peripheral speed (ceramic): 35 m/s Grinding spindle speed, infinitely variable: 800 – 4,200 rpm Grinding spindle drive approx.: 5 kW Total connected load: approx. 7.5 kW - 400 V - 50 Hz Weight: approx. 2,300 kg Accessories / Special Equipment: • Microprocessor program control (SIEMENS) with easy screen display. The program sequences are set via decade switches and stops (with vernier) and monitored on the screen. • Programs: plunge grinding with/without cross positioning, surface grinding with step-over or continuous cross feed, creep feed grinding upcut or downcut with/without cross positioning. All programs with automatic roughing, finishing, spark-out cycles, and automatic retraction. • Automatic straight line dressing device AF 65 S with automatic dressing value compensation and automatic speed adjustment for constant cutting speed (with display) • DIAFORM – grinding wheel profiling device mounted above the grinding wheel • Electrically controlled creep feed device with feed rate and motor load display • Short stroke device for controlling table reversal and table clamping (cross) Rjdpfxswd Tx Ue Agijp • Swivelling JUNG sine magnetic chuck, 450 x 180 mm, mounted. Separate swivelling sine magnetic chuck 350 x 175 mm, fine-pole with stop • Coolant system with paper band filter, additional accessories, operating manual Condition: Very good condition with accuracy protocol by JUNG technician! Please click here for a video of the machine: Delivery: ex stock, immediate availability, FCA Metzingen Payment: strictly net - upon receipt of invoice