Paviršiaus šlifavimo staklės

Jung JF-520

Sąlyga: geras (naudotas), Gamybos metai: 1979, šlifavimo ilgis: 600 mm, šlifavimo plotis: 200 mm, CONTROL SYSTEM Njdpfxoxwt A Dj Adnedd .. electronic control WORKING AREA - SURFACE GRINDING - .. Grinding length: 600 mm .. Grinding width: 200 mm TABLE - SURFACE GRINDING - .. Magnetic chuck: yes MAGNETIC CHUCK .. Length: 600 mm .. Width: 200 mm .. Weight: 100 kg GRINDING SPINDLE HEAD .. Speed range up to: 4200 rpm GRINDING WHEEL .. Type of grinding wheel: disc .. Diameter (max): 250 mm .. Bore: diameter: 51 mm .. Width: 25 mm ELECTRICAL SPECIFICATIONS .. Total connected load: 7.5 kW .. Supply voltage: 400 V .. Mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. Required space - left/right: 3000 mm .. Required space - front/back: 2540 mm .. Overall height: 1850 mm .. Total weight approx.: 2000 kg

Sąlyga: naudotas, Gamybos metai: 2014, Swing diameter over bed: 508 mm Turning length: 724.5 mm Control: Hurco Ultimax Swing diameter over cross slide: 336 mm Spindle speeds – stepless: 0–4500 rpm Spindle bore: 65 mm Ndodpfx Adjv T Np Ajnjd Feed rates: 0–30 m/min Rapid traverse in X and Z axis: 30 m/min Operating voltage: 400 V Connected load: 30 kVA Cross slide travel: 203.2 mm Longitudinal travel: 580/640 mm Space requirement approx.: 4.3 x 2.1 x 2.6 m Tool speeds: 0–5000 rpm Tool drive power: 5.5 kW Main spindle motor: 15/22 kW Machine weight approx.: 5.6 t C-axis: 360° x 0.001° increments Equipped with a 12-station turret with driven tool positions (C-axis), sub-spindle, power chuck, coolant system, and chip conveyor. Control: Hurco Ultimax. Supplied with extensive accessories.

Sąlyga: geras (naudotas), Gamybos metai: 1980, veikimo valandos: 15 393 h, Funkcionalumas: visiškai funkcionalus, šlifavimo ilgis: 600 mm, Please provide your offer price. Nodsxru H Tjpfx Adnsdd Sales only within Europe, including Turkey. Price excluding packaging; Delivery terms: FCA (machine location) ===== For technical specifications, please refer to the attached handout. All warranty and guarantee rights are excluded. We do not assume any responsibility for the accuracy of the technical data and year of manufacture, the completeness of accessories and tool equipment, or compliance with all safety and environmental protection requirements specified in accident prevention regulations. No sales to private individuals.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, INFORMACIJA APIE PRECIZINĮ PLOKŠČIAGRINDŽIAVIMO STAKLES Gamintojas: JUNG Nsdpsxqa I Tofx Adnjdd Modelis: JF 520 Metai: 1997 Staklių svoris: 2200 kg Bendras svoris: 2600 kg Vieta: Haiger Kaina: 24 000 € be PVM. Aprašymas: Serijos Nr. 3821, skaitmeninis ekranas (Heidenhain), mikroprocesorinis valdymas, profilio formavimo įrankis (Diaform), staklių apšvietimas, aušinimo skysčio sistema, magnetinis prispaudimo stalas. Techniniai duomenys: Tvirtinimo paviršius (I x P, mm): 600 x 200 Apdirbamas paviršius (I x P, mm): 600 x 250 Maks. magneto dydis, mm: 600 x 200 Didžiausi šlifavimo disko matmenys, mm: 225 x 25 x 51 Atstumas nuo stalo iki ašies vidurio, mm: 350 (+50) Stalo išilginis suvartymas, m/min: 1 – 20 Lėtasis bėgimas, mm/min: 0 – 500 Šlifavimo ašies greitis, aps./min: 800 – 4200 Galia kW (lėtu režimu): 2,2 (3,5)

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 027.0400/067, CNC CYLINDRICAL GRINDER STUDER S-33 CNC Year 2007 – Fanuc 21i-TB 1 External Grinding Spindle Country of Manufacture: Switzerland Voltage: 380/50/3 Net Machine Weight: 4000 kg TECHNICAL SPECIFICATIONS Distance Between Centers: 600 mm Center Height: 175 mm Maximum Workpiece Weight: 80 kg Longitudinal Slide Z Maximum Travel: 800 – 1150 mm Speed: 0.001 to 10,000 mm/min (early 2000s model: 0.001–5,000 mm/min) Resolution: 0.0001 mm Ndodpfx Adow T Sh Eenod Transverse Slide X Maximum Travel: 285 mm Speed: 0.001 to 20,000 mm/min (early 2000s model: 0.001–10,000 mm/min) Resolution: 0.0001 mm Wheelhead (Universal Version) Swivel Range: -15 to 225° (early 2000s model: -15 to 195°) Swivel Axis: 2.5 / 1° Hirth Drive Power: 7.5 or 9 kW or 11 kW Grinding Wheel: 500x63 (80/110F5) x203 mm Workhead Speed: 1 – 1,500 min⁻¹ Taper: MT4 or MT5 / ISO 50 Drive Power: 1.6 or 3.0 or 4.0 kW Tailstock Taper: MT3 or MT4 Quill Stroke: 35 / 50 mm (early 2000s model: 35 mm) Quill Diameter: Ø 50 mm Fine Adjustment: +/- 40 µm Controller: Fanuc 21i-TB All technical data is provided without guarantee, subject to errors and omissions.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, šlifavimo ilgis: 600 mm, šlifavimo plotis: 250 mm, šlifavimo disko skersmuo: 250 mm, JUNG JF520 / JF525 SPM-X mechanically, geometrically, and electrically overhauled according to JUNG’s new machine protocol with a new SIEMENS control system (12" Touch OP) incorporating our 25 years of experience in the overhaul of JUNG machines - new control cabinet with holding force regulation and thyristor control for main spindle motor - control system upgrade with 12" SIEMENS touch-OP cycle control and highly intuitive operator panel - remote maintenance module available as an option - plain-text fault display (multilingual) - electromechanical stepper motor infeed with programmable automatic retraction - roughing/finishing infeed - spark-out strokes selectable in advance - dressing compensation - plunge grinding cycles - automatic central lubrication - all numerical values (infeed) and on/off functions (such as hydraulics and coolant) can be set directly via touch panel - all analog functions such as spindle speed, holding force, cross feed speed, and grinding functions are directly accessible to the operator via rotary and toggle switches - comes with 12 months warranty Maximum magnet size: 600 x 200 mm (Standard: 500 x 200 mm) Maximum grinding area: 600 x 250 mm Delivery time: approx. 10–12 weeks Njdpfobwl Uhjx Adnjdd We are happy to accept your used JUNG grinding machine in part exchange

Sąlyga: naudotas, Gamybos metai: 1980, Grinding length: 500 mm Grinding width: 200 mm Workpiece height: 290 mm Machine from the Physikalisch-Technische Bundesanstalt - Geometrically reconditioned - Electrical system checked, fully functional, relevant components replaced - All wear parts replaced - Color: light grey, paint condition good Equipment: Electromagnetic chuck 500x200 mm Grinding spindle overhauled 2-axis digital readout for Y and Z axes Ndjdpfewb Hygox Adnsd Automatic feed for Y and Z axes Y-axis with zero shut-off Manual hand dresser Infinitely variable grinding wheel speed Constant V-belt despite wheel wear Paper band filtration system, used Max. height with 250 mm grinding wheel diameter: 290 mm Max. grinding area: 600x250 mm Max. load including magnet: 100 kg Warranty: 1 year on geometry and electronics throughout Germany Delivery: ex works Availability: immediately Payment: prior to collection Acceptance at our facility Shipping as specified by the customer

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2023, Ši mašina skirta įmonėms, ieškančioms paprasto ir patikimo pakavimo sprendimo. Maksimalus greitis siekia iki 1500 maišelių per valandą. Paprastas valdymas atliekamas dviem paprastais veiksmais: maišelio pripildymas iš viršaus ir jo uždarymas. Parduodami Autobag maišeliai šiose dydžiuose: 150x250 – 1,5 mln. maišelių 200x320 – 2,5 mln. maišelių Pilnos euro paletės kaina: 1 paletė – 0,025€ už maišelį 2 paletės – 0,019€ už maišelį 3 paletės – 0,018€ už maišelį 4 paletės – 0,017€ už maišelį 5 paletės – 0,016€ už maišelį ir t.t. Nodpfx Asr E Dpzjdnsdd 10 ir daugiau – 0,01€ už maišelį Nuo 1 mln. Autobag maišelių po 0,01€ už vienetą

Gamybos metai: 1989, Sąlyga: paruoštas naudoti (naudotas), Table dimensions X/Y: 600mm/200mm, Grinding dimensions X/Y: 600mm/250mm, Magnet dimensions X/Y: 600mm/200mm, Grinding wheel diameter: 225mm, Grinding wheel width: 25mm, Grinding wheel bore: 51mm, Spindle center–table distance: 350mm (+/-50mm), Table feed: 20m/min, Creep feed: 0mm/500mm/min, Speed: 4200rpm, Machine dimensions X/Y/Z: approx. 2700mm/2100mm/2100mm, Weight: approx. 2500kg. An on-site inspection is possible. Nedpfx Ajv Exrwjdnedd

Sąlyga: naudotas, Gamybos metai: 1985, Grinding length: 600 mm Grinding width: 200 mm Total power requirement: 7.5 kW Machine weight approx. 2.3 t O F F E R We can offer you, subject to prior sale and errors excepted, from stock on a non-binding basis: JUNG Horizontal Precision Surface & Profile Grinding Machine with Microprocessor Control Model: JF 520 MS Year of manufacture: 1985 2225 ----- Max. grinding length (table longitudinal travel): 600 mm Max. grinding width (cross travel): 200 mm Max. grinding height under the wheel approx.: 230 mm Max. distance table to spindle centre: 500 mm Magnetic chuck size: 500 x 200 mm Max. table load: 100 kg Table speed: 1 – 24 m/min Table speed, creep grinding: 5 – 450 mm/min Max. table cross feed: 1,000 mm/min Max. vertical feed grinding head: 500 mm/min Grinding wheel dimension: 250 x 25 x 50.8 mm Max. peripheral speed (ceramic): 35 m/s Grinding spindle speed, infinitely variable: 800 – 4,200 rpm Grinding spindle drive approx.: 5 kW Total connected load: approx. 7.5 kW - 400 V - 50 Hz Weight: approx. 2,300 kg Accessories / Special Equipment: • Microprocessor program control (SIEMENS) with easy screen display. The program sequences are set via decade switches and stops (with vernier) and monitored on the screen. • Programs: plunge grinding with/without cross positioning, surface grinding with step-over or continuous cross feed, creep feed grinding upcut or downcut with/without cross positioning. All programs with automatic roughing, finishing, spark-out cycles, and automatic retraction. • Automatic straight line dressing device AF 65 S with automatic dressing value compensation and automatic speed adjustment for constant cutting speed (with display) • DIAFORM – grinding wheel profiling device mounted above the grinding wheel • Electrically controlled creep feed device with feed rate and motor load display • Short stroke device for controlling table reversal and table clamping (cross) • Swivelling JUNG sine magnetic chuck, 450 x 180 mm, mounted. Separate swivelling sine magnetic chuck 350 x 175 mm, fine-pole with stop • Coolant system with paper band filter, additional accessories, operating manual Condition: Very good condition with accuracy protocol by JUNG technician! Ndodpfx Adjwd Tx Usnsd Please click here for a video of the machine: Delivery: ex stock, immediate availability, FCA Metzingen Payment: strictly net - upon receipt of invoice

Sąlyga: naudotas, Gamybos metai: 2017, Tekinimo skersmuo 550 mm Tekinimo ilgis 800 mm Valdymas FANUC Series 31i Model B Veleno skylė 76 mm Ndodpsw U U Idofx Adnsd Veleno apsukos 3500 aps/min Veleno variklio galia 40/25 kW Veleno sukimo momentas 864 Nm Įrankių kiekis 16 vnt. Tvirtinimas BMT Greitoji eiga 30 m/min Matmenys I x P x A: 2,9 x 2,1 x 2,25 m Staklių svoris apie 6,5 t Naudotas, plokštuminio kreipimo CNC tekinimo staklės labai geros būklės. Tik 9 100 val. darbo laiko - 3-žandikaulių griebtuvas Ø 315 mm - Drožlių transporteris - Įvairūs įrankių laikikliai - Programuojamas grąžtas - Alyvos rūko ištraukimo sistema - Įmontuotas variklis

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3806, šlifavimo ilgis: 600 mm, šlifavimo plotis: 250 mm, šlifavimo disko skersmuo: 250 mm, šlifavimo veleno greitis: 3 000 aps./min, galia: 3,5 kW (4,76 AG), Įranga: sūkių greitis be galo kintamas, JUNG JF520 – workshop-refurbished Mechanically and electrically inspected and function-tested by our JUNG specialists Wearing parts replaced Geometry overhauled according to the JUNG new machine protocol - Grinding area: 600 x 250 mm - Stepper motor infeed - 3-axis HEIDENHAIN digital readout - Dressing compensation - Magnetic force control - Automatic central lubrication - Used magnetic chuck - Used paper band filter 6 weeks parts warranty Delivery time: short-term We are happy to accept your used JUNG grinding machine as trade-in. Nedpfx Adowz Hf Njnjdd

Sąlyga: naujas, We supply all spare and wear parts for the JUNG JF and HF series. For example: grinding wheel flanges, switches, bellows, splash guards, replacement grinding spindles, cross spindles, piston rods, etc. Ndsdpjgbt U Nefx Adned Additionally, we offer accessories such as magnetic chucks (new or refurbished), dressers, paper band filters, slideway oil, lubrication pumps, etc. Also available: used parts that are no longer manufactured by the OEM. When making inquiries, please specify the exact designation of the part.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Travel paths X/Y/Z: 900 x 400 x 200 mm Ndsdpfx Adov Irwrensd Table size: 800 x 400 mm

Gamybos metai: 2022, Sąlyga: visiškai atnaujintas (naudotas), Overhauled dresser for all JUNG HF and JF models available on an exchange basis. Assembly can also be provided upon request. Please specify the exact machine type when making an inquiry. We will supply the overhauled dresser and you return the defective part to us. Nodpfxohyudfj Adnodd