Vidinės cilindrinės šlifavimo staklės

JUNG C8

Gamybos metai: 1969, būklė: paruoštas naudoti (naudotas), Max. grinding depth: 80 mm, spindle-to-table distance: 145 mm, spindle bore: 28 mm, connected load: 7 kW, length: 2100 mm, width: 1400 mm, height: 950 mm, weight: 1.6 t, complete with documentation; on-site inspection is possible. Cpodpsqzkdmsfx Aahsw

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamintojas: LORENZ Tipas: S8/630 Ratlankio skersmuo: 630 mm Ratlankio plotis: 180 mm Didžiausias modulis: 8 Serijos numeris: 12371 Galia (kW): 10 Matmenys (I×P×A mm): 3000 × 2500 × 3500 Svoris (kg): 5500 Maks. ruošinio skersmuo (mm): 630 Maks. modulis: 8 Dabartinė būsena: veikianti Cedpfexakzpsx Aahjpw

Būklė: geras (naudotas), Made in Germany Smallest economically grindable bore: 6 mm Largest grindable bore: 50 mm Maximum grinding length: 80 mm Maximum clamping diameter: 235 mm Distance from workpiece spindle axis to table center: 145 mm Workpiece spindle speeds: 640 and 1000 rpm Workpiece spindle box swivel angle to one side: 10 degrees Maximum table speed, hydraulically infinitely variable: 12 m/min Maximum distance between workpiece spindle flange and grinding support: 550 mm Codpoda A Eiefx Aahopw Power requirement: approx. 8 kW Net weight of the machine: 2000 kg

Būklė: naudotas, Manufacturer: LORENZ Cpodpfx Aaswr Dx Uehjw Model: LS 630 Condition: Used Stock number: DCL1722 Module: 12 Maximum diameter: 630 mm Working stroke: 220 mm Distance between table and cutter spindle: 450 mm Machine weight: 10,000 kg Table bore diameter: 450 mm Table diameter: 730 mm Spindle diameter: 110 mm Distance between table and spindle: 580 mm

Gamybos metai: 2009, būklė: geras (naudotas), Lifting capacity: 30 t Cjdpfoqiz N Rox Aahopw Precision lift Lifting height: 9 meters

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009,

Būklė: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Codpfx Aefxyhfsahspw Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Būklė: naudotas, Techninės detalės: Csdpfx Aaew Rktbohepw Šlifavimo skersmuo: 600 mm Šlifavimo ilgis: 2600 mm Centrų aukštis: 180 mm Ruoinio skersmuo – maks.: 360 mm Sūkių skersmuo: 600 mm Šlifavimo disko skersmuo: 600 x 305 x 160 mm Bendras galios poreikis: 17,6 kW Aušinimo skysčio įranga: 90 l/min Ruoinio verpstės greitis: 12,5–250 aps./min Begalinė pastūma: 0,05 – 6,0 mm Apytikslis staklių svoris: 8,2 t Apytikriai matmenys (IxPxA): 6,4 x 2,2 x 1,9 m Finibalanz balansavimo įrenginys Griebtuvas su cilindro paklaidos korekcija, skaitmeninis ekranas X=0,001 – Z=0,01 Spindulio įrenginys 2–10 mm

Būklė: naudotas, x-axis travel: 6500 / 13,150 mm y-axis travel: 4000 mm z-axis travel: 1250 mm w-axis travel: 2250 mm Control system: Sinumerik 840 D Clamping table area: 5500 / 12,150 x 3000 mm Cpodpfx Aajwa Dx Rshow Clearance between columns: 3500 mm Max. distance between work table and spindle nose: 3000 mm Max. workpiece weight: 70,000 / 105,000 kg Ram dimensions: 480 x 510 mm Spindle speeds – infinitely variable: 6.3 – 4000 rpm Milling spindle motor: 63 kW Spindle torque: 3300 Nm Tool holder: DIN 39871 AD ISO 50 Feed rate X/Y/Z: 24,000 mm/min Total power requirement: 120 kVA Machine weight: approx. 245 t Space requirement: approx. 29 x 7.7 x 8.1 m The machine is in nearly new condition and was completely overhauled and modernized in 2020 for 1.6 million euros! Equipment/Accessories: - Automatic tool magazine for 153 tool pockets - Automatic milling head magazine for 6 milling heads - Machining modules / Milling heads: Machining module – straight – straight long – Machining module – standard angle – 4000 rpm, 144 x 2.5°, ISO 50 Machining module – narrow extended angle – 40 kW, 4000 rpm, 1800 Nm, 144 x 2.5°, ISO 50 Machining module – universal index – 40 kW, 4000 rpm, 2100 Nm - C-axis 144 x 2.5°, B-axis +/- 44 x 2.5°, ISO 50 - Coolant unit - Chip conveyor - Technical documentation

Būklė: geras (naudotas), Gamybos metai: 2007, 1 naudota CNC įrankių šlifavimo staklė Gamintojas: Schneeberger Modelis: Corvus GDS 650 Pagaminimo metai: 2007 CNC valdymas: FANUC 160i Programinė įranga: Quinto 4.3 Aktyvintos programinės įrangos parinktys nr.: 1, 2, 19, 21, 22, 30, 31, 32, 35 -Įrengtas Fanuc pakrovimo robotas -Aušinimo skysčio sistema Darbinės eigos: X ašis: 650 mm Y ašis: 300 mm Z ašis: 300 mm C ašies pasukimo kampas: +150°/-60° C’ ašies pasukimo kampas: +/- 180° Šlifavimo velenas: Disko skersmuo iki 250 mm Apsisukimų dažnis: 0–10'000 aps./min. Maks. veleno galia: 26 kW Tvirtinimas HSK 80 Maks. diskų skaičius: 6 Cpedpfxsu A Dn Ne Aahow Ruoninys velenas: Maks. kampinis greitis: 180°/s Variklio galia: 1,6 kW Tvirtinimas: ISO 50 Tikslumas (rezoliucija): Linijinių ašių žingsnis: 0,001 mm C ašies žingsnis: 0,001° Matmenys: Ilgis: 3100 mm Plotis: 1915 mm Aukštis: 2190 mm Svoris: 8500 kg U ašis su įmontuotu lunetu, fiksuojamu cilindru ir atatampiu 6 padėklų įkroviklis (skersmuo 3–32 mm) 64 plastikiniai įvorės Techniniai duomenys gali būti netikslūs