Šoninis krautuvas

Jumbo SHKP 50/12/45 TV

Sąlyga: naudotas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- The machine will be cleaned and fully inspected before delivery. Technical Data Overview (additional accessories possibly included; please inquire separately) Pos. 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally adjustable steplessly > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for saw cut detection > NC length stop, mounted on slot table included Positioning of cross-cut saw integrated in the control system. > Length: 3500 mm Pos. 2: Tenoning and slot spindle ----- > Number of tools: variable, stepless NC-axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless 254 mm NC-axis adjustment > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st Profiling spindle (climb & counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless NC-axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless 254 mm NC-axis adjustment > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Muntin guide consisting of: Guide rail on the stop (climb spindle section), muntin support bar from above in the area of the vertical right profiling unit and profiling spindle. Pos. 5: Horizontal profiling unit, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool diameter: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool diameter: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online-capable Bwjdpfx Ahsvu Hfqe Ssh > Rebate device for tear-free rebating > Double-parts package > Return system for one-man operation: swivel belt > Screen control > Tilt window unit > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig type production program > Without working tools No original pictures available yet. Images show an identical machine from our archive. ----- Price for the above-mentioned machine on request! ----- Option with surcharge: EUR 6,500.00 Note...

Sąlyga: geras (naudotas), Pramoninis robotas Gamintojas: Kuka Tipai: KR6, KR6-2, KR6arc Tipai: KR16L6, KR16L6-2, KR16, KR16-2, KR16-2 S, KR16-2 F Visi tipai su KRC2ed05 valdikliu Kuka KR6 KRC2ed05 Gamybos metai 2006 Kuka KR6-2 KRC2ed05 Gamybos metai 2011 Kuka KR6arc KRC2ed05 Gamybos metai 2006-2007 (daug vienetų sandėlyje) Kuka KR16L6 KRC2ed05 Gamybos metai 2009 Kuka KR16L6-2 KRC2ed05 Gamybos metai 2011 Kuka KR16 KRC2ed05 Gamybos metai 2007-2009 (daug vienetų sandėlyje) Kuka KR16-2 KRC2ed05 Gamybos metai 2010-2012 (daug vienetų sandėlyje) Kuka KR16-2 Speed KRC2ed05 Gamybos metai 2012 (daug vienetų sandėlyje) Bwsdpfx Ahjtuc U Rs Soh Kuka KR16-2 Foundry KRC2ed05 Gamybos metai 2012

Sąlyga: paruoštas naudoti (naudotas), Parduodu nuotraukose matomą transporterį, ilgis apie 8 m. Juostos plotis 0,3 m. Galiu pasirūpinti transportu. Bwedor Nvx Uepfx Ah Seh

Sąlyga: geras (naudotas), Gamybos metai: 2002, veikimo valandos: 5 900 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 74343, darbinis plotis: 1 350 mm, šlifavimo juostos ilgis: 2 620 mm, šlifavimo juostos plotis: 1 370 mm, Plataus juostos šlifavimo staklės Bütfering Optimat SBC 313 Pagaminimo metai: 2002 Modelis: Optimat SBC 313/QCE/Classic Bwsdpfx Ahoqvl D Ho Ssh - Su 3 agregatais (aprašymas pateiktas nuotraukoje) - Šlifavimas iš viršaus Darbinis plotis: 1350 mm Šlifavimo juostos plotis: 1370 mm Šlifavimo juostos ilgis: 2620 mm Skersinės juostos plotis: 150 mm Skersinės juostos ilgis: 4700 mm Daugiau informacijos nuotraukose.

Sąlyga: naujas, Table width 3000 mm Table length 1500 mm Torch heads 1 Control CNC Feed rate 20,000 mm/min Total power requirement 15 kVA Space requirement approx. 4.5 x 2.5 m * Heavy machine bed with precision guides for smooth machine travel * Cross carriage with ball bearings, offering height adjustment with 400 mm vertical stroke * Thermal separation of drive and cutting area ensures maximum precision * Automatic height detection and torch height control during cutting * Torch holder with collision protection and automatic shut-off in case of collision * Installation or relocation of the machine possible via plug & play method using forklift, pallet truck, or crane * 3-sided access to cutting area thanks to cantilever design SATOTEC Extraction Table: The SATOTEC table system features a robust table construction for a maximum cutting thickness of 150 mm. For cutting workpieces up to 150 mm thick, oxy-fuel cutting technology is required. Bwodpfx Ahepm U U Ns Ssh The workpiece support frame is equipped with replaceable 3 mm flat-bar slats, mounted at a 45° angle. The spacing between the slats is 50 mm. Power Source Kjellberg Q1500: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm, both dry and under water * Recommended cutting range from 0.5 to 40 mm * Maximum piercing thickness 30 mm, can be increased with ProPierce Technology * Marking, grooving, and scribing of coated metallic materials * Inverter power source with digitally managed, fully electronic process cycle * Integrated cooling system with semi-automated filling and draining Gas Control: Fully automatic, processor-controlled plasma universal gas console Q-Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control Extraction System TEKA EcoCube 5.5 kW Filter medium: dry, fat-free or oil-free dust / fumes Filter area: 100 m² (4 cartridges @ 25 m² each) Filter cartridge: BIA M, Type Nano Separation efficiency: 99% (per BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan capacity: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz Current consumption: 11.5 A Voltage type: 3Ph+N+PE Fan installation: on the unit, incl. silencer duct bend, right side Motor control: frequency inverter Noise level: 75dB(A) + max 10 dB(A) during cleaning pulse Intake nozzle: NW 250 mm via intake duct, left side Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: light grey - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Closing hooks and toggle latches - Compressed air connection and condensate drain each fitted with cable gland - Compressed air connection with hose nozzle d=8mm - System equipped with grounding bolt - Cables in UL version - EATON frequency inverter installed on the left in attached control cabinet

Gamybos metai: 2012, Sąlyga: labai geros būklės (naudotas), WEINIG window production line comprises: Unirex 3000 machining center Univar 15 Unitex 15 Bsdpjh H Iyxefx Ah Sowh

Gamybos metai: 2011, Sąlyga: paruoštas naudoti (naudotas), A Gross Apparatebau GmbH shredder, previously used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90 rpm, drive power: 18.5kW, number of blades: 14, screen perforation: 10mm–40mm, extraction port diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection possible. Bodpfou Nlkxsx Ah Sjwh

Sąlyga: naudotas, Gamybos metai: 1999,

Sąlyga: geras (naudotas), Codice: 0272 Marca: STETON Bwodpfx Ahjx Itqfs Sjh Modello: TF 5 Centro di lavoro per telai di porte e finestre Dati tecnici: Troncatrice: Diametro lama: 400 mm F30 Velocità lama: 3000 giri/min Movimento orizzontale lama pneumatico Motore: 3 Hp Albero intestatore: Lunghezza: 490 mm Motore: 10 Hp Velocità: 3000 giri/min Diametro albero: 50 mm Diametro utensile: 350 mm Corsa verticale albero: 450 mm Carro intestatore: Velocità: 5/22 m/min Dimensioni: 350 x 685 mm Lunghezza pezzo min/max: 320/2600 mm Larghezza pezzo min/max: 20/200 mm Spessore pezzo min/max: 20/120 mm Lato profilatura: 1° albero di profilatura a salto (antistrappo) Lunghezza albero: 325 mm Diametro albero: 50 mm Motore: 5,5 Hp N° 4 posizioni Diametro utensile max: 220 mm Albero di profilatura principale: Lunghezza: 490 mm Motore: 10 Hp Velocità: 6000 giri/min Corsa verticale albero: 450 mm Diametro utensile max: 220 mm Gruppo listelli per vetro: Diametro lama: 180 mm Diametro albero: 30 mm Velocità: 6000 giri/min Motore: 3 Hp Carrello supplementare Albero per fresatura ferramenta Motore: 3 Hp Diametro albero: 40 mm Diametro utensile: 180 mm Diametro bocca di aspirazione: 120/80 mm Aria compressa: 6-7 bar Dimensioni d’ingombro: 2300 x 2800 x 1900 h mm Peso: 2250 kg

Sąlyga: naudotas, Gamybos metai: 2004, Sato slicer for sale Bodpfx Ahsvx N I Ns Sewh