Faneros presas

Joos HP 120 - 3100 x 1350mm

Sąlyga: paruoštas naudoti (naudotas), Caractéristiques techniques • Pression : 2,2 kg/cm² • Chaudière à huile diathermique de 18 kW • Pressage temporisé • Affichage digital Puissance et moteurs • Tension : 400 V • Raccordement : Triphasé • Puissance : 20 kW Dimensions hors tout • Longueur : 3 500 mm Cjdpfx Aot N Autodmehf • Largeur : 1 500 mm • Poids : 3 200 kg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2025, Hauptantrieb Presskraft: 1200 kN Zusätzliche Ausstattung Chsdpfxowvm Rbo Admjf Mylarfolie an oberen und unteren Pressplatten angebracht Elektronische Ebenheitskontrolle (EFC) zum Schutz bei unsachgemäßer Beladung Diese ITALPRESSE XL/6 30-13 PM BO Furnierpresse wurde im Jahr 2025 hergestellt. Nutzen Sie die Gelegenheit, diese ITALPRESSE XL/6 30-13 PM BO Furnierpresse zu erwerben. Kontaktieren Sie uns für weitere Informationen. Anwendungsbereiche Pressen / Laminieren

Sąlyga: naujas, Gamybos metai: 2023, OMC PL 105 LC 30/13 Water Heated Veneer Press Working area: 3000 x 1300 mm Opening width: 400 mm 6 cylinders, 85 mm diameter Total pressing force: 105 tons Maximum heating temperature: 85°C Logic control system Csdeiypzljpfx Admohf Machine operation via touch panel: readings of temperature, pressing force, shelf opening time, loading area calculator, gluing process programming Power: 21 kW CE certificate Year of manufacture: 2023 Machine available on order Brand new machine

Sąlyga: naudotas, Gamybos metai: 2012, Integrated NC machining centre for windows and doors, comprising: A) Automatic loader model "SP" Automatic loader for Base SP No. 1 profiling machine - Automatic loader consisting of: - Table with motorised belts - Automatic device for transferring parts from the buffer to the loading area of the profiling machine * Min. workpiece length: 450 mm, max.: 3200 mm * Min. workpiece width: 40 mm, max.: 230 mm * Min. workpiece thickness: 40 mm, max.: 120 mm * Work cycles: 10/min * Chain feed speed on table: 7 m/min * Loading table dimensions: 2800 x 2150 mm B) Automatic profiling machine model SUPERSET NT C 6 Position 1 = Planing spindle Position 2 = 1st right vertical spindle Position 3 = 1st left vertical spindle Position 4 = 1st upper horizontal spindle Position 5 = 1st lower horizontal spindle Position 6 = Beading recovery unit Entry level 2500 mm Feed speed 6-36 m/min via frequency inverter No. 1 - Motor power 5.5 HP (4 kW) Horizontal pressure unit before planer with pneumatic disengagement from plate Pneumatic disengagement from the control panel for the infeed unit before the planing spindle Tandem infeed unit before right vertical spindle, fast disengagement Infeed units after the upper spindles to reduce piece span from 620 mm to 450 mm Entry guide with bearings for automatic feeder Electrical setup for the use of automatic loader Manual central lubrication Pump for lubricating work surface with automatic drive System for inline integration with INTEGRA SYSTEM - Working height raised to 970 mm - Entry signal light (traffic light) - Piece counter Independent control cabinet POS. 1 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) T-SET quick tool clamping system - Allows locking/unlocking the tool with a simple air gun POS. 2 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) Vertical spindle with 180 mm usable length T-SET quick tool clamping system Electronic vertical positioning POS. 3 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) High-precision spindle Vertical spindle with 180 mm usable length T-SET quick tool clamping system Electronic horizontal positioning POS. 4 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) Chjdpfsixxwmex Admef Speed 8,300 rpm T-SET quick tool clamping system Electronic vertical positioning POS. 5 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) Speed 8,300 rpm T-SET quick tool clamping system POS. 6 Beading recovery unit Includes: PRL enables automatic transition from planing to beading function and vice versa. - Spindle group with 30 mm shaft diameter, 30 mm length - Electronic horizontal positioning - Electronic vertical positioning - Hardware and PLC modifications for axis management - Tandem outfeed and modified

Sąlyga: naudotas, Gamybos metai: 2009, max. workpiece length 4500 mm Milling spindle: 1 unit Main motor: 20 kW Control system: Siemens Weinig Conturex 2 C 114 ----- Working width: 40–260 mm Working height: 25–110 mm 2 x PowerGrip clamping tables, each 2280 mm ----- Workpiece length: 200 – 4,500 mm Machining of workpieces longer than 2,700 mm is carried out using a shuttle cycle. Main spindle 1: ----- Motor with brake, 20 kW HSK 63F Electronically adjustable speed: 2,000–18,000 rpm Maximum tool length from HSK 63 F reference surface: 290 mm With C-axis Tool magazine: ----- Number of slots: 30 Slot spacing: 100 mm Multi-spindle boring unit permanently installed ----- for horizontal and vertical drilling and milling without tool change Csdpfxowunwys Admshf ----- Price ex location Prices for Dismantling and loading onto customer truck Transport within Germany and abroad, reassembly, commissioning, and if required, new profiles available on request! Including used tools (drawings available on request!): ----- Wood: IV 68, 78, 88 inward and outward opening, with fitted drip rail Wood-aluminium: IV 68/68, 78/78, 87/68, 97/78 Lift/slide doors IV 68 and 78 Entrance doors IV 68 and 78 Pivoting windows Corner joint: counter/dowel Technical data as per manufacturer – without guarantee! Detailed technical description available on request!

Sąlyga: geras (naudotas), Sander composed of: First unit - electronic cross-belt Cedpfx Adet N Tfcomjhf Second unit - electronic pad-belt Third unit - electronic superfinishing pad-belt Machine equipped with inverter-controlled belts and vacuum hold-down for small parts Line machine

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, bendras ilgis: 4 400 mm, darbinis plotis: 1 400 mm, aukščio reguliavimo tipas: elektrinis, įėjimo dažnis: 50 Hz, įėjimo įtampa: 400 V, Hello, we offer for sale a Heesemann LSM 8 wide belt sander in a configuration with four sanding units: cross-belt unit / longitudinal unit with calibration drum / longitudinal unit with reverse / longitudinal unit with de-dusting brush The machine has undergone mechanical refurbishment and inspection, checked and set up, ready for operation. Year of manufacture: 1997 Feed speed: 5-25 m/min – infinitely adjustable from the control panel Working height: 880 mm Workpiece thickness: 3-80 mm Power requirement: 107 kW – at full load Total weight: 10,250 kg Control: control panel with physical buttons and display Control and abrasive belt change side: right Single, perforated feed belts, perforated table with channel and vacuum fan – for safe transport of short workpieces. Element hold-down: rubber-coated rollers, diameter 70 mm. Abrasive belt Q unit: 5,400 mm x 150 mm Motor power: 13/17 kW – two-speed motor – belt speed 12 m/s / 24 m/s "Sergeant" belt: 4,850 mm x 141 mm Longitudinal belt L unit: 2,620 mm x 1,450 mm Motor power: 16.5 kW / 21 kW – two-speed motors – 10 m/s / 20 m/s Pressure: Hold-down beams with computer-controlled selective pressure adjustment – CSD® system for seamless, multi-row feeding with smooth adjustment of individual pressure elements. Controller roller reading distance: 16 mm. Abrasive belts feature a cleaning system – air blast and dust extraction. Workpiece thickness tolerance compensation up to 2 mm via maintenance-free electromagnetic hold-downs. Working width as well as the start and end position of the sanding pressure beam are electronically controlled. Abrasive belt cleaning via blowing tubes; dust extraction via integrated extraction channels; air blast activation is automatic upon workpiece detection in the machine. At the end: cleaning/de-dusting brush, 150 mm diameter, with extraction channel for dust removal. Additional blow rotors at the machine outfeed with an extraction channel. Commissioning at your location and basic operational training – to be arranged. Price negotiable on request, machine available immediately. Codpju Hlzfjfx Admohf

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, BIESSE ROVER C9.65 FT Conf 2 MACHINING CENTER XP600 control system fully PC-based. - Divided into 2 working areas and 8 clamping zones along the X axis 2 vacuum pumps at 300 m³/h - Configuration 1 X=6450mm Y=1860mm Codpett Sqdjfx Admjhf C2-A1 Composition: - 12 kW electrospindle, ISO30 attachment, air cooling - 360° rotating operator device - C axis - 10-position revolver tool changer on Z carriage Prepared for mechanical copier – 5 toolholders with ISO30 fitting and collet chuck Automatic lubrication system – Video diagnostics – Oil-bath sawing unit for 215mm blade Additional extension of reticular worktable to 2100mm in Y direction

Sąlyga: naudotas, Grooving spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm #2809 Weinig Unicontrol 6 Technical Data Overview (Please inquire for any additionally included accessories) Pos. 1: Crosscut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for detection of saw sections CNC-controlled length stop ----- > Length: 3500 mm > Electronic length stop including positioned crosscut saw Pos. 2: Tenoning and Grooving Spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical spindle stroke pneumatic: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3,000 rpm > Max. tool swing diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 360 mm > Motor power: 11 kW Pos. 3: 1st Profiling Spindle (climb and counter-rotation) ----- > Position: vertical, right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling Spindle ----- > Position: vertical, right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical spindle stroke pneumatic: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 11 kW 2 axially synchronized feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g., glazing bar components) Glazing bar guide comprises: Top glazing bar support rail in the area of the vertical right profiling unit and profiling spindle. Pos. 5: Horizontal Profiling Unit, Top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool swing diameter: 130 mm > Axial adjustment: 30 mm, 2 positions > Radial adjustment: 125 mm, 4 positions, manual Pos. 6: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical, right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions by pneumatic turret > Radial adjustment: 110 mm, 8 positions by pneumatic turret > Spindle speed: 5,850 rpm Csdpfx Aextvgkjdmjhf > Spindle diameter: 40 mm > Max. tool swing diameter: 210 mm > Motor power: 3.0 kW Additional Features ----- > Electric feed height adjustment incl. mechanical digital display and manual feed beam clamping > Rebate device for splinter-free rebating > Double parts package > Return device for single-operator usage: swing conveyor belt > Screen control > Tilted window device > Electronic angle display for slanted windows > Industrial PC with Windows PC control/NEXUS Extraction port diameters: ----- Crosscut saw: 80 mm Grooving spindle: 140 mm Profiling spindle 1: 140 mm Profiling spindle 2: 140 mm Grooving device f...

Sąlyga: naudotas, Leadermac 523 U Maximum planing width: 23 cm - Maximum planing height: 13 cm – Bottom spindle: 5.5 kW, right and left spindles: each with 7.5 kW motor, top spindle: 7.5 kW, universal spindle: 7.5 kW Chedpfxoqwg H De Admef – 2 feed rollers in the table, 7 from above – Spindles adjustable both vertically and horizontally – Infinitely variable feed speed adjustment – Central lubrication system, pump with material slip fluid