Elektrinis sunkiasvoris krautuvas

JMG MC 250.09 FL

Būklė: naujas, Gamybos metai: 2026, keliamoji galia: 25 000 kg, kėlimo aukštis: 2 470 mm, bendras ilgis: 6 520 mm, - Charger Manufacturer: Zivan - Model: Battery Charger NG9 - Input: 400V, 12A, 50-60Hz - Output: 96V, 80A - Rear group with two independently rotating units - Front axle drive with counter-rotating movement - High free-lift mast - Removable counterweights - Extendable rear group: 7720 mm - Max fork lifting capacity with extended rear group: 25t @ 0.9m - Max fork lifting capacity with retracted rear group: 16.5t @ 0.9m - Drive: front axle drive with counter-rotating motion, 2 x AC electric motors, 12 kW, 96V each - Total weight with forks: 25,000 kg - Total weight with jib: 25,000 kg - Fork carriage and fork shank: 3,000 kg - Weight of crane mast: 3,000 kg - Weight of removable counterweights: 6,000 kg - Battery: 96 V - 1050 Ah Iijdpsy Eh N Rofx Alroc - Service brake: hydraulic, foot operated - Parking and emergency brake: hydraulic with automatic control - Steering: via rear axle - Parking and emergency brake: hydraulic with automatic control - Jib angle from mast: +12°/-7° - Motor: 1 x AC electric pump, 35 kW, 96V

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, 5 ašių sinchroninis DMG DMC60U duoblock Įjungimo valandos: 78 000 h Veleno veikimo valandos po keitimo: 5 900 h (2022) 2023 m.: pakeista XZ stumdomoji skarda Mašiną galima apžiūrėti bet kada iš anksto susitarus. Valdymas: iTNC530 Heidenhain Ašies eiga: X - 600 mm, Y - 700 mm, Z - 600 mm B ašis: -30 / -180° Iodpfx Aewglnyolreic C ašis: 360° be galo Veleno tvirtinimas: SK40 Veleno apsisukimai: 20 - 12 000 aps./min Įrankių magazinas: 60 vietų Pasukamojo stalo skersmuo: 630 mm Padėklo dydis: 630 mm x 630 mm Vidinis aušinamojo skysčio tiekimas (IKZ): 40 bar Juostinis filtravimo įrenginys: juostinis filtravimo įrenginys Priedai: matavimo jutiklis, elektrinis rankenėlė, dokumentacija, dvi nulio taško prispaudimo sistemos;

Būklė: naujas, bendras ilgis: 6 520 mm, Gamybos metai: 2026, kėlimo aukštis: 2 470 mm, keliamoji galia: 25 000 kg, - Charger Manufacturer: Zivan - Model: Battery Charger NG9 - Input: 400V, 12A, 50-60Hz - Output: 96V, 80A - Rear group with two independently rotating units - Front axle drive with counter-rotating movement - High free-lift mast - Removable counterweights - Extendable rear group: 7720 mm - Max fork lifting capacity with extended rear group: 25t @ 0.9m - Max fork lifting capacity with retracted rear group: 16.5t @ 0.9m - Drive: front axle drive with counter-rotating motion, 2 x AC electric motors, 12 kW, 96V each - Total weight with forks: 25,000 kg - Total weight with jib: 25,000 kg - Fork carriage and fork shank: 3,000 kg - Weight of crane mast: 3,000 kg - Weight of removable counterweights: 6,000 kg - Battery: 96 V - 1050 Ah - Service brake: hydraulic, foot operated - Parking and emergency brake: hydraulic with automatic control Iodjzagmvjpfx Alreic - Steering: via rear axle - Parking and emergency brake: hydraulic with automatic control - Jib angle from mast: +12°/-7° - Motor: 1 x AC electric pump, 35 kW, 96V

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2008, Used swing-beam shears RAS 86.33 with newly ground upper and lower blades, regularly serviced and only lightly used Technical data: Year of manufacture: 2008 Iisdpfov Tk Exox Alrjc Weight: 6,800 kg Maximum sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Back gauge depth: 5–1000 mm Working height: 800 mm Strokes per minute: 30–64 min⁻¹ Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase current Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angular gauge: 2,195 mm Machine depth with angular gauge: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame throat depth: 100 mm Tank capacity: 150 l

Būklė: geras (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 15 996 h, įėjimo įtampa: 400 V, bendras svoris: 6 750 kg, 1000 kN Max. stroke: 200 Weight: 6,750 kg Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50 Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV (accident prevention regulations) inspection performed at regular intervals / maintenance always carried out regularly by Amada Accessories: Iodpfjtwliwex Alrjic Tool Die: 2 pcs UKB 20.478 V8/12 30° 835 mm 3 pcs UKB 20.344 V4/V7 88° 835 mm Tool Holders: 4 pcs UKB base for double V die 20.287 + 60.919 835 mm Press Brakes: 5 pcs UKB 10.261 H100 R0.6/90° 2 pcs UKB 11.158 H80 R0.6/30° 2 pcs UKB 11.200 H66 R0.8/90° Other: Light curtain in need of repair (replacement value approx. €4,500) – included separately as a spare part (has been replaced) The machine can be inspected live under power in DE84051 Mettenbach by appointment. Sale only to businesses and under exclusion of any warranty!

Būklė: geras (naudotas), Gamybos metai: 2012,

Būklė: geras (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, Description: The machine is in good technical condition, with the possibility of testing upon prior agreement. Equipped with the Siemens Shopturn system, including a loader, and comes fully equipped. BASIC PARAMETERS Working area - Max turning diameter: approx. 410–500 mm - Max length: 800 mm - Distance between spindles: approx. 1020 mm - Swing over bed: ~700 mm - Practical use: ideal for shafts, flanges, bodies up to ~800 mm Travel (axes) - X axis: ~480 mm - Y axis: ??100 mm - Z axis: ~800–845 mm - B axis: ??110?? (5-axis machining) - C axis: 360° (indexing + interpolation) This makes it a full-fledged turn-mill center (not a conventional lathe). Spindles Iiodpfx Aoy Rgafjlrjc - Main spindle speed: ~5000 rpm - Main spindle power: ~25–34 kW - Bar capacity: approx. 76–87 mm - Sub-spindle speed: ~6000 rpm - Milling spindle (the main difference compared to a conventional lathe) - Speed: up to 12,000 – 20,000 rpm - Power: ~19–22 kW - Taper: HSK-A63 or Capto C6 - Supports: milling, drilling, tapping, and 5-axis simultaneous operations Tool system - Tool magazine: 24 – 48 tools - Live tools: yes (fully integrated) Control system - Siemens 840D sl + CELOS (most common) Weight and dimensions - Weight: ~10,000 kg - Dimensions: approx. 6.5 × 2.7 × 2.0 m

Gamybos metai: 2017, būklė: paruoštas naudoti (naudotas), - NAUDOTA - FIBRINIO LAZERIU VAMZDŽIŲ PJOVIMO MAŠINA SU AUTOMATINE PAKROVIMO/IŠKROVIMO SISTEMA MIN. APVALUS SKERSMUO: ø 25 mm MAKS. APVALUS SKERSMUO: ø 355 mm MAKS. KVADRATINIS PJUVIS: 260 X 260 mm Isdex E Eihspfx Alrjic MAKS. STAČIAKAMPIS PJUVIS: 300 X 200 mm MAKS. LEIDŽIAMA APKROVA: 100 Kg/m ŠALTINIS: IPG YLS-4000 ; 4000 W VALDYMO BLOKAS: SIEMENS 840D SVORIS: 12 500 Kg PASTABA: AUTOMATINIS PAKROVIMAS 3-12,5 m; AUTOMATINIS IŠKROVIMAS 12,5 m; 3D PJOVIMO GALVUTĖ; KAPACITINIS JUTIKLIS; AUTOMATINIS REGULIAVIMAS

Būklė: naudotas, Gamybos metai: 1996, Šlifavimo ilgis: 1 000 mm Šlifavimo plotis: 550 mm Detalės aukštis: 400 mm Stalo tvirtinimo paviršius: 1 580 x 550 mm Maks. stalo apkrova: 950 kg Magnetinė plokštė: 1 000 x 550 mm Stalo išilginė eiga (X ašis): 1 200 mm Stalo padavimas: 1–30 m/min Vertikalūs padavimai: 1–300 mm/min Z ašis: 470 mm Skersinis padavimas: 1–2 000 mm/min Šlifavimo disko matmenys: 400 x 100 x 127 mm Šlifavimo disko apsukos: 1 500–3 500 aps./min. Iedpoxx A Dmsfx Alroic Šlifavimo veleno pavara: 11,00 kW Bendra galingumo paklausa: 23,00 kW Staklių svoris apie: 7,50 t Užimamas plotas apie: 4,50 x 3,20 x H2,90 m Aušinimo skystis su integruotu siurbliu hidraulinėje talpykloje, su nusiurbimu.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2011, Naudota automatinė hidraulinė juostinė metalo pjovimo staklė MEP SHARK 332 NC EVO Juostos matmenys: 3320x27x0,9 mm Isdpfeul Svlox Alroic Pjovimo kampas: nuo 45° iki +60° Darbo režimai: rankinis, pusiau automatinis-dinaminis, pusiau automatinis, automatinis Pjovimo greitis: 15-100 m/min (inverteris) Pjovimo pajėgumas: prie 0° – apvalus 300 mm – kvadratinis 260 mm – stačiakampis 330x260 mm Matmenys: 2600x2320x2000 mm Pagaminimo metai: 2011 Svoris: 1050 kg Įrenginys yra pilnai atnaujintas ir patikrintas.