Koordinuotojo gręžimo staklės

IXION-MAXION KT2-1300.1ST

Būklė: geras (naudotas), Gamybos metai: 2006, mašinos/transporto priemonės numeris: 860027, Offer 24331 Technical Data: - Table surface: 1700 x 550 mm - Manual travel distances X / Y: 1300 x 500 mm - Drilling machine manufacturer: MAXION, Type: BT 18 STP - Drilling capacity up to: 18 mm - Tapping capacity up to: M 16 - Drill spindle taper: MK 2 - Drill spindle stroke with depth fine adjustment: 76 mm - Pneumatic feed unit: PV 12 Csdpfx Asu Aqz Asahjgp - Throat depth: 670 mm - Spindle speeds: 100 - 1800 rpm - Additional spindle speeds: 200 - 3600 rpm - Motorised stroke of the drilling unit - Motorised table clamping x + y - Minimum quantity lubrication - Pneumatic connection: 6 bar - Electrical connection: 400 V - Space requirement approx.: W 1750 x H 1600 x D 1000 mm - Weight approx.: 1200 kg

Būklė: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts Cgodsu Aa I Sjpfx Aahjp - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Cedpfsfxyhfox Aahogp Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, Dėžės tipo elektrostatinė miltelinio dažymo krosnis: Ilgis: 500 cm, Plotis: 250 cm, Aukštis: 300 cm - Miltelinio dažymo kabina su filtru: Ilgis: 300 cm, Plotis: 220 cm, Aukštis: 270 cm Cjdpfxev Nvnds Aahsgp - Elektrostatinio miltelinio dažymo įranga: Modelis: HMK MULTICOLOR, Naudojimo tipas: Rankinis

Būklė: geras (naudotas), Gamybos metai: 2011, mašinos/transporto priemonės numeris: MS 1153, Technical data (approx.): - Passage to blasting chamber: W 370 x H 170 mm - Blasting nozzle - Door opening to blasting chamber - Blast media pressure vessel - Blast media recovery - Separate control panel - Space requirement blasting unit: 1600 x 2000 x H 1750 mm - Space requirement blast media container: 1200 x 1200 x H 2250 mm - Cartridge filter with suction fan MUNK - SCHMITZ - Air volume: 700 - 1500 m³/h - Suction fan: 3 kW - Space requirement filter unit: 1600 x 1600 x H 3250 mm - Motor-driven infeed roller conveyor: 4 m Cgsdpfxollvr Ds Aahop - Non-driven roller conveyor: 3 m - Roller width approx.: 800 mm - Roller conveyor height approx.: 700 mm

Būklė: geras (naudotas), Gamybos metai: 2000, veikimo valandos: 83 000 h, spaudimo jėga: 350 kN, varžto skersmuo: 25 mm, For sale is an injection moulding machine by Arburg, model 320S 350-60. Year of manufacture: 2000 Automatic operating hours: 83,000 Screw diameter: 25 mm Cgsdpfx Aaohhuq Ajhsp Clamping force: 350 kN Cylinder length: 60 Transport can be organised Europe-wide upon request, at an additional cost. Price incl. VAT Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Gamybos metai: 2025, būklė: naujas, Ultraschallbad UEC 300 ist eine Industrielösung zur Reinigung großer und schwerer, stark verschmutzter Teile. Die Maschine verfügt über einen pneumatischen Hub mit einer Tragkraft von 200 kg. Die Arbeitsfrequenz beträgt 28 kHz mit Sweep-Technologie. Das Gerät besteht aus einem Haupt-Ultraschallbad mit drei seitlichen Ultraschall-Piezowandlern sowie einem zweiten, darüberliegenden Bad mit Ölabscheider. Die Steuerung erfolgt über ein hochwertiges Touchscreen-HMI mit 3D-Anzeigen. Das komplette Bad ist aus säurebeständigem Edelstahl AISI304 mit einer Materialstärke von 2 mm gefertigt. Cedpfx Aaegd Uifshsgp --- Technische Daten : Plattformgröße: 900 x 570 mm Maximale Traglast: 200 kg Nutzbare Höhe: 400 mm Ultraschallleistung: 3 kW (6 kW p-p) Ultraschallfrequenz: 28 kHz mit Sweep-Modus Heizleistung: 9 kW Ausstattung : 7" Touchscreen mit 3D-Benachrichtigungen Automatisches Wassernachfüllsystem Automatischer Liftbetrieb Füllstandssensor Hubpositionssensoren Deckelsensor Garantie: 2 Jahre WEITERE MODELLE AUF LAGER VERFÜGBAR

Būklė: naudotas, Gamybos metai: 2003, NAKAMURA TOME SUPER NTJ frezarka CNC PRODUCENT: NAKAMURA TOME, JAPONIA MODEL: SUPER NTJ ROK PRODUKCJI: 2003 STEROWANIE: FANUC 18 iT B UCHWYT: 210,0 mm MAKS. ŚREDNICA TOCZENIA: 200,0 mm ODLEGŁOŚĆ MIĘDZY KIEROWNICAMI: 780,0 mm ŚREDNICA RURY PRZELOTOWEJ: 80,0 mm POSUWY: - OŚ X: 750,0 mm - OŚ Z: 130,0 mm Cgodpfx Aaov I Tx Rehop WIEŻA NARZĘDZIOWA: 2 x 12 pozycji PRĘDKOŚĆ OBROTOWA WRZECIONA: do 5.000 obr./min PRZELOT WRZECIONA: 65,0 mm NOS WRZECIONA: A2-6 DODATKOWO: - CNC podajnik prętów krótkich - Wieża narzędziowa - Przenośnik wiórów - Dokumentacja / instrukcje obsługi

Būklė: naujas, Gamybos metai: 2023, Tube drilling machine, angled drilling machine, drilling automatic TDM100, manual, with one drilling head Cgedpfx Aaslgvkijhep IMMEDIATELY AVAILABLE FROM STOCK + CAN BE VIEWED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Max. tube length 3,000 mm (option: 6,000 mm) - Positioning accuracy +/- 0.2 mm - 10 stops (expandable as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube rotation device - Drilling unit power 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit illumination - Integrated tool cabinet - Round tubes up to 114 mm - Square tubes up to 100 x 100 mm - Flat material up to 100 x 15 mm - T-profile up to 100 x 100 x 12 mm - L-profile up to 100 x 100 x 8 mm - Double post up to 100 x 15 mm - Flow drilling up to M12 - Drill holes up to Ø 50 mm

Gamybos metai: 2001, būklė: visiškai atnaujintas (naudotas), Affordable MAZAK Laser Cutting System NTX48 1.5kW Year of manufacture: 2001 Very well-maintained, fully refurbished MAZAK laser machine with 1500W Sheet size: 2500mm x 1250mm Minimal installation footprint of 2.6m x 6m Cgsdpfxohturco Aahsp Small parts conveyor belt Fully enclosed machine cover Mild steel: up to 12mm Stainless steel: up to 6mm Plastics possible Incl. software Incl. warranty Incl. extraction unit Incl. commissioning and training Can be tested under power! ===Optional with fully automatic loading and unloading===