CNC daugiabriaunių automatinių tekinimo staklių staklės

INDEX MS 40 C

Sąlyga: naudotas, TECHNICAL DATA - Number of spindles: 6 - Number of counter spindles: 1 SPINDLES - Maximum bar diameter: 40 [mm] - Spindle speed: 7,000 [rpm] - Spindle drive power: 13/24 [kW] NUMERICAL AXES Gedpfexqhtkox Abdjil - Slide unit 1.1: X and Z axes controlled by CNC - Slide unit 1.2: X and Z axes controlled by CNC - Slide unit 2.1: X and Z axes controlled by CNC - Slide unit 2.2: X and Z axes controlled by CNC - Slide unit 3.1: X and Z axes controlled by CNC - Slide unit 3.2: X and Z axes controlled by CNC - Slide unit 4.1: X and Z axes controlled by CNC - Slide unit 4.2: X and Z axes controlled by CNC - Slide unit 5.1: X and Z axes controlled by CNC - Slide unit 5.2: X and Z axes controlled by CNC - Slide unit 6.1: Z axis controlled by CNC - Slide unit 6.2: X and Z axes controlled by CNC ELECTRICAL SUPPLY - Supply voltage: 380 [V] - Total drive power: 77 [kW] WEIGHT AND DIMENSIONS - Footprint: 3329 x 2032 [mm] - Machine height: 2,654 [mm] - Machine weight: 7,100 [kg] MACHINE HOURS - Operating hours: 47,580 [hrs] EQUIPMENT - CNC control: Siemens 840D (Powerline) - Dual NCU - 2 NC panels - Cutting force monitoring: ARTIS - Chip conveyor - Coolant tank * with high-pressure pump: 80 [bar] - Bar feeder: Index MBL 40-6 - Fire extinguishing system * * NB: Functionality not guaranteed. Should be checked by a qualified company retained by the buyer. - Electrical transformer

Sąlyga: naudotas, Swing diameter over bed: 2400 mm Swing diameter over cross slide: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Faceplate diameter: 1650 mm Speed range: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Gjdpfx Ajxddvnjbdjil Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over cross slide: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm (with special jaws up to 2050 mm) Clamping diameter in tailstock faceplate: 300 - 1400 mm Max. workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speeds, infinitely variable in 4 steps: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center cone angle: 70° Slides Travel of grooving slide: 500 mm Travel of plan slide: 1400 mm Rapid traverse long axis: 2000 mm/min Rapid traverse plan axis: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, plan: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Diameter of faceplate (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange center cone angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying attachment for first support - Copying length: 8500 mm - Max. copying depth in one pass: 500 mm Boring attachment - Boring bar: 460 x 390 mm - Boring diameter: 600 - 1000 mm - Max. boring depth in one pass: 2700 mm For Ks of 200 kp/mm² - s max. = 1.5 mm/rev - a = max. chip section 30 mm² with 1000 mm overhang - With increasing boring depth, chip section is reduced One taper turning guide, setting angle up to 8° and max. taper length (in one process) of 2000 mm, setting accuracy ± 5 minutes. One taper turning guide, setting angle up to 15° and max. taper length (in one process) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane at the headstock.

Sąlyga: geras (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, MITUTOYO Contracer CV-2100M4 Contour Measuring Machine Measuring range horizontal X = 100 mm Measuring range vertical Z = 50 mm Column travel range Z2 = 350 mm Inclination +/- 45° Dimensions (W x D x H): 745 mm x 450 mm x 885 mm Total weight approx. 150 kg Including PC system Giedovun Tpopfx Abdol Including 218-001 cross table Including 2028-003 rotating vise

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Reishauer RZ 362A su apie 60 rinkinių deimantinių diskų Šlifavimo sraigtų matmenys: Min./Maks. išorinis skersmuo: 280/350 mm Plotis: 84/104 mm Maks. žingsnis su apribojimais: MOD 8.0 (DP 3,2) Sriegių kiekis: su apribojimais iki 3 Maks. naudojamas plotis (poslinkio eiga): 90 mm Išsamesnę techninę informaciją rasite pridėtame PDF faile. Priedai: Gisdpfxsxb Ufus Abdel Profilinimo įrenginys Apie 60 rinkinių deimantinių diskų Šlifavimo akmenys Turbo separatorius

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, matavimo diapazonas X ašis: 500 mm, matavimo diapazonas Y ašis: 500 mm, matavimo diapazonas Z ašis: 500 mm, Matavimo diapazonas: X=500 mm, Y=500 mm, Z=500 mm Ilgio matavimo paklaida E0 µm, E0/E40 µm, MPE pagal ISO 10360-2:2009 – 2,4 + L/300 ties 18°C - 22°C C99 valdiklis su BP26_SE valdymo pultu Komplektacija: Gisdpfx Absttza Rsdjl VAST XXT jutiklis 6 vietų jutiklių keitimo magazinas 4 pozicijų jutiklių keitimo diskas Kalibracinis rutulys su sertifikatu Mašinos segtuvas, prietaiso dokumentacija, naudojimo instrukcija įvairūs jutikliai HP darbo stotis ir monitorius papildoma įranga Programinė įranga: Calypso Basic CNC Galima atnaujinti į naujausią Calypso versiją ir pasirinkti papildomas parinktis

Sąlyga: naujas, Gamybos metai: 2026, The ERBA Turbo 60 is a centrifugal finishing machine for deburring, smoothing, and polishing small to medium-sized workpieces. The machine features a digital process timer, a digital speed display, and a dosing pump (wet configuration). The turntable speed can be adjusted via frequency converter. The Turbo 60 is available in both dry and wet versions. It can be optimally linked with the ERBA YE-60 separation unit shown in the images. Technical Data: - Gross volume: 60 L - Drive power: 3.0 kW - Turntable speed: 75 to 300 rpm Gijdpfxon Ut Ile Abdel - Optional equipment: tilt motor, soundproof lid, or separation box Prices are net plus the currently applicable statutory VAT and shipping costs. Some images may show the machine with accessories and options which are available at extra cost. If you are interested, we look forward to hearing from you. We are happy to provide you with non-binding advice. The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations take place by means of telecommunication (email, telephone, messaging portal). As a first step, we will send you a non-binding quotation, which also includes our general terms and conditions (with imprint) and information about your right of withdrawal before any purchase or contract is concluded.

Sąlyga: naudotas, Walther Trowal Circular Trough Vibratory Finishing Machine, Model CLS-230 Ref. No. 05.833/00 Year of manufacture: 1969 Trough diameter: 1100 mm Overall trough height: approx. 650 mm Process container / gross volume: max. 230 liters Usable volume: approx. 115 liters Speed: 1100 to 1800 rpm, infinitely variable Motor power: 7.5 kW Electrical connection: 400 Volt, 50 Hz - Operating time can be set manually or via timer - Infinitely variable motor speed via variator drive - Manually adjustable eccentric balance weights - Trough with polyurethane lining (lining partially damaged/worn) - Sound-insulated lid - Manual separation flap - Built-in screen separation device after the separation flap - Liquid connection - Material discharge opening: 180 x 150 mm - Control cabinet for wall mounting Gisdpfx Aefqpxijbdol - Baffle cover with perforated screen Space requirement with base (L x W x H): 1800 x 1750 x 1700 mm Net weight: approx. 1800 kg Good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and circulated extremely gently. The continuous relative movement between the workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Control: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Travel Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg NC rotary table with direct drive Positioning accuracy: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 positions Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Through-spindle coolant Coolant shower Tool breakage detection in tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel Machine is delivered with many tools Godpfjvgxfysx Abdoil

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2017, veikimo valandos: 132 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 20731, X ašies eiga: 500 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 300 mm, greitas poslinkis X ašimi: 90 m/min, greitas poslinkis Y ašis: 90 m/min, greitasis eiga Z ašyje: 90 m/min, nominali (akivaizdi) galia: 35 kVA, valdiklių gamintojas: Fanuc 31I, veleno greitis (maks.): 42 000 aps./min, veleno veikimo valandos: 132 h, aušinimo skysčio tiekimas: 20 juosta, ašies variklio galia: 15 W, veleno nosis: HSK E40, įėjimo įtampa: 415 V, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Die Maschine befindet sich in einwandfreiem Zustand. Die Bearbeitungsgenauigkeit beträgt +/-0,0015 mm (gemessen mit Zeiss Micura). Die Maschine ist mit einem Renishaw OMP400 sowie einem BLUM Pico zur Werkstück- und Werkzeugvermessung ausgestattet. Die Wiederholgenauigkeit liegt bei +/-0,001 mm. Hochgeschwindigkeits- und Hochgenauigkeitsoptionen auf Fanuc vorhanden. Die Maschine kann unter Strom besichtigt werden. Gjdpfxjvcfi Ds Abdjil

Sąlyga: naudotas, Gamybos metai: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6 / 3.5 m Photos show identical machine with centre height 225 mm Base machine: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Standard equipment: - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - B-axis infinitely variable, high-resolution - Marposs measuring system for tool measurement - Active longitudinal positioning - GAP control on T1 and T2 by ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO, integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt driven Options available at extra cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm with integrated GAP sensor (lead time applies) - CNC-controlled C-axis - Non-circular (polygon) grinding - Hydrostatic lead screw in X - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical overhaul: - Complete machine overhauled in accordance with Kellenberger test protocol - New easy-maintenance enclosure - New paintwork Electrical overhaul: - New, modern CNC CYLINDRICAL GRINDER CONTROL with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic license and various optional modules depending on the machine’s equipment. Basic software features: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal cylindrical oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zero setting - Wheel zero setting - Measurement of dressing diamonds - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - 3 flat dressing units - Corrections - Z-position measurement (probe required) - GAP contact (touching device required) OPTIONS available at extra cost: Profile plunge grinding software: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single- and multi-start external and internal thread grinding with profile dressed on the wheel - Dressing of single- and multi-rib wheels - Flank angle freely selectable Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-round plunge grinding: - External and internal non-round oscillation grinding Gjdpfx Aouxfucobdeil Non-round grinding software: Precondition for non-round grinding is equipping the workpiece spindle with a high-resolution rotary encoder to enable operation as a C-axis. The non-round...