Pavarų formavimo staklės

GLEASON- PFAUTER 100 S

Gamybos metai: 2018, Sąlyga: paruoštas naudoti (naudotas), Burri Werkzeugmaschinen generaliai atnaujintas Reishauer dantų paviršių šlifavimo staklės yra prieinamos. Šlifavimo ašies apsukos: 3500 aps./min, pjovimo greitis: 63 m/s, didžiausias krumpliaračio skersmuo: 360 mm, modulio ribos: 0,1-7, dantų skaičius: 6-600, didžiausias ruošinio aukštis: 160 mm, didžiausias nuolydžio kampas: +/-45°, didžiausias ruošinio svoris: apie 60 kg. Min. disko pamatinės apskritimo skersmuo: 250 mm, šlifavimo disko matmenys X/Y/Z: 350 mm/104 mm/160 mm, šlifavimo sraigto skersmens intervalas: 270 mm-350 mm, maks. šlifavimo plotis: 175 mm, maks. ruošinio sukimosi dažnis: 800 aps./min. Komplektacijoje: profiliravimo įrenginiai, balansavimo įranga, vibracijos kontrolės sistema, kompaktiška filtravimo sistema, aušinimo agregatas, aušinimo vandens šilumokaitis, robotizuota automatizacija ir transportavimo vežimėliai. Yra dokumentacija. Galima apžiūra vietoje. Gbsdpfsw Rqwaox Abdjg

Sąlyga: naudotas, Swing diameter over bed: 2400 mm Swing diameter over cross slide: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Faceplate diameter: 1650 mm Speed range: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over cross slide: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm (with special jaws up to 2050 mm) Clamping diameter in tailstock faceplate: 300 - 1400 mm Max. workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speeds, infinitely variable in 4 steps: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center cone angle: 70° Slides Travel of grooving slide: 500 mm Travel of plan slide: 1400 mm Rapid traverse long axis: 2000 mm/min Gbsdpfxjxddvne Abdjg Rapid traverse plan axis: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, plan: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Diameter of faceplate (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange center cone angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying attachment for first support - Copying length: 8500 mm - Max. copying depth in one pass: 500 mm Boring attachment - Boring bar: 460 x 390 mm - Boring diameter: 600 - 1000 mm - Max. boring depth in one pass: 2700 mm For Ks of 200 kp/mm² - s max. = 1.5 mm/rev - a = max. chip section 30 mm² with 1000 mm overhang - With increasing boring depth, chip section is reduced One taper turning guide, setting angle up to 8° and max. taper length (in one process) of 2000 mm, setting accuracy ± 5 minutes. One taper turning guide, setting angle up to 15° and max. taper length (in one process) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane at the headstock.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Reishauer RZ 362A su apie 60 rinkinių deimantinių diskų Šlifavimo sraigtų matmenys: Gedpjxb Ufuefx Abdebg Min./Maks. išorinis skersmuo: 280/350 mm Plotis: 84/104 mm Maks. žingsnis su apribojimais: MOD 8.0 (DP 3,2) Sriegių kiekis: su apribojimais iki 3 Maks. naudojamas plotis (poslinkio eiga): 90 mm Išsamesnę techninę informaciją rasite pridėtame PDF faile. Priedai: Profilinimo įrenginys Apie 60 rinkinių deimantinių diskų Šlifavimo akmenys Turbo separatorius

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2010, Maschinentyp: CNC-Rundschleifmaschine Hersteller: Fritz Studer AG Modell: S22 Baujahr: 2010 Steuerungssystem: FANUC 31i-A CNC Maschinenbett: Granitan® S103 Mineralguss Ausführung: Fester Geradschleifkopf für Außenrundschleifen (Außendurchmesser) Gbjdpfx Abewl Uvkodog Automatisierung: Automatisches Beladesystem mit Integration eines FANUC-Roboters Spitzenweite: 650 mm Spitzenhöhe: 175 mm Max. Werkstückgewicht: 150 kg Max. Werkstücklänge: 700 mm Max. Werkstückdurchmesser: 449 mm Schleifscheibendurchmesser: 610 mm Schleifscheibenbreite: 160 mm Schleifscheibendrehzahl: Bis zu 3.200 min⁻¹ Spindelleistung: 15 kW Schleifkopf: Feste, gerade Ausführung Verfahrweg X-Achse: 310 mm Verfahrweg Z-Achse: 850 mm Max. Eilgang X-Achse: 15.000 mm/min Max. Eilgang Z-Achse: 30.000 mm/min C-Achse: Vollständige Rundumdrehung des Werkstückkopfes Programmieroberfläche: StuderWIN mit FANUC 31i-A Zusatzsoftware: StuderGRIND Automatisierungsschnittstellen: Standard-Schnittstellen für Lader und Peripheriegeräte Weitere Ausstattung: Abrichtgerät (Rotationsabrichter), Heidenhain-Maßstäbe, diverse Spannmittel

Sąlyga: geras (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, MITUTOYO Contracer CV-2100M4 Contour Measuring Machine Measuring range horizontal X = 100 mm Measuring range vertical Z = 50 mm Column travel range Z2 = 350 mm Inclination +/- 45° Gbsdpfxevun Tpo Abdsg Dimensions (W x D x H): 745 mm x 450 mm x 885 mm Total weight approx. 150 kg Including PC system Including 218-001 cross table Including 2028-003 rotating vise

Gamybos metai: 2021, Sąlyga: naujas, Type: Gas-fired with central recuperator Max. temperature: 1,300°C Max. furnace output: approx. 700 kg/h Clear door opening (W x H): 600 x 400 mm Number of burners: 6 Number of control zones: 3 Heating capacity: 720 kW Gbjdpjg E S Injfx Abdjg Total electrical connected load: approx. 15 kVA PLC: Siemens S7

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, CNC Twin-Spindle Turning Center Control: CNC path control incl. 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and ShopTurn 3 G TECHNICAL DATA Maximum turning diameter: 340 mm Spindle distance: 1470 mm Turning length: 1135 mm Swing diameter over bed: 700 mm Swing diameter up to tool turret 2: 540 mm Travel paths: X1 – Tool turret I: 270 mm Y1 – Tool turret I: 120 mm Z1 – Tool turret I: 1200 mm X2 – Tool turret II: 195 mm Y2 – Tool turret II: 80 mm Z2 – Tool turret II: 1200 mm X3 – Counter-spindle slide: 180 mm Z3 – Counter-spindle slide: 1200 mm Main Spindle Integrated spindle motor ISM 102 Drive power (100/40% duty cycle): 40/48 kW Torque (100/40% duty cycle): 570/680 Nm Speed range: 0-4000 rpm Bar diameter: 102 mm Draw tube inner diameter: 104 mm C-axis and spindle brake (angular resolution): 0.001° Gbsdpfewcd S Nex Abdsg Counter Spindle Integrated spindle motor ISM 76 Drive power (100/40% duty cycle): 25/32 kW Torque (100/40% duty cycle): 280/380 Nm Speed range: 0-5000 rpm Bar diameter: 65/75 mm C-axis (angular resolution): 0.001° Slide 1 Tool turret (direct drive) Number of tools: 12 Tool holder diameter VDI (DIN 69880): 40 mm Max. power (100/40% duty cycle): 10.9/14.2 kW Max. torque (100/40% duty cycle): 26/34 Nm Speed range: 40–10000 rpm Slide 2 Tool turret (direct drive) Number of tools: 12 Tool holder diameter VDI (DIN 69880): 40 mm Max. power (100/40% duty cycle): 10.9/14.2 kW Max. torque (100/40% duty cycle): 26/34 Nm Speed range: 40–10000 rpm Slide 3 Rapid traverse speed X-/Z-axis: 30/45 m/min Tool resolution Z-axis: 0.001° Feed force (40% duty cycle) X-/Z-axis: 16/13 kN EQUIPMENT/ACCESSORIES  Short bar loader IRCO ILS-RBK 100/16  Various main spindle reduction tubes  NC-controlled workpiece unloader from both main and counter spindle The unit consists of NC-controlled * horizontal axis * swivel unit * vertical axis * 2-jaw gripper for interchangeable gripper jaws  Conveyor belt for removing workpieces from the machine  Coolant system 8/20 bar with immersion cooler  Chip conveyor  Oil mist extraction  Control cabinet cooling unit (up to 40°)  Counter-spindle slide  Easy-Tool Monitor  1 collet chuck for quick-change chuck size 100 for main spindle  1 collet chuck for quick-change chuck size 100, Nova AxisFix for counter spindle  Approx. 40 various quick-change chucks size 100 (total stock)  Change device, pneumatic ø 100 mm  Approx. 50 various tool holders, stationary and driven (total stock)  Mounting elements  Documentation

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61373, It is in working condition. Gjdpfjvwlf Ijx Abdebg

Sąlyga: naudotas, Gamybos metai: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6 / 3.5 m Photos show identical machine with centre height 225 mm Base machine: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Standard equipment: - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - B-axis infinitely variable, high-resolution - Marposs measuring system for tool measurement - Active longitudinal positioning - GAP control on T1 and T2 by ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO, integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt driven Options available at extra cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm with integrated GAP sensor (lead time applies) - CNC-controlled C-axis - Non-circular (polygon) grinding - Hydrostatic lead screw in X - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Gbjdpfx Ajuxfucebdog Mechanical overhaul: - Complete machine overhauled in accordance with Kellenberger test protocol - New easy-maintenance enclosure - New paintwork Electrical overhaul: - New, modern CNC CYLINDRICAL GRINDER CONTROL with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic license and various optional modules depending on the machine’s equipment. Basic software features: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal cylindrical oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zero setting - Wheel zero setting - Measurement of dressing diamonds - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - 3 flat dressing units - Corrections - Z-position measurement (probe required) - GAP contact (touching device required) OPTIONS available at extra cost: Profile plunge grinding software: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single- and multi-start external and internal thread grinding with profile dressed on the wheel - Dressing of single- and multi-rib wheels - Flank angle freely selectable Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-round plunge grinding: - External and internal non-round oscillation grinding Non-round grinding software: Precondition for non-round grinding is equipping the workpiece spindle with a high-resolution rotary encoder to enable operation as a C-axis. The non-round...

Sąlyga: naudotas, TECHNICAL SPECIFICATIONS - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 [mm] - Max. machining length: 195 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 8.2 [kW] Gbodpfx Aeuha U Hjbdog - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 25.4 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 8.2 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 9 - Number of driven positions: 4 - Driven tool speed: 5,000 [rpm] TOOL HOLDER 2 - Number of positions: 8 SUB MACHINING - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 7,500 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Footprint: 2,912 x 1,300 [mm] - Machine height: 1,720 [mm] - Machine weight: 2,400 [kg] MACHINE HOURS - Power-on hours: 44,140 [hrs] - Operating hours: 28,118 [hrs] - Spindle hours: 15,281 [hrs] EQUIPMENT - CNC control: Fanuc 31i-B - 3-color status light tower - Driven tool motorization at: S11, S51 - Powered guide bushing - Part catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank: KNOLL KF 200/1200 * with high-pressure pump - Bar feeder: Tornos Robobar SBF 326 - Fire extinguishing system * NB: Functionality not guaranteed. Must be checked by a qualified company appointed by the buyer.