Kūginės pavaros šlifavimo staklės pirkti naudotą (8)

Būklė: naudotas, Gamybos metai: 2000, Technical Details: Maximum wheel diameter: 275 mm Wheel width: 55 mm Maximum module: 6.5 Minimum module: 1.5 Face Hobbing – Continuous Process Continuous method: Cedpov N Hilsfx Aahepw Workpiece and tool (usually Spiron) rotate simultaneously; all teeth are generated in a single operation at once. The cutter head contains several groups of cutters (not arranged in a circle). Teeth of constant height (parallel-height tooth). Conical tooth top surface. Single Indexing Process: The workpiece is stationary and the tool (usually Arcon) rotates and cuts one tooth by plunging into the material. Once a tooth is cut, the tool retracts, the workpiece indexes by one tooth pitch, and the next tooth is cut. This process continues until all teeth are completed. The cutter head has all cutters arranged along a circular path. Conical tooth height. Parallel tooth top surface. The C28 is capable of both wheel and pinion machining. However, for the single indexing process, the C28 must be appropriately configured. This requires a direct measurement system, a part-drive brake for the workpiece axis, and a license file for single indexing operation.

Būklė: naudotas, Gamybos metai: 2005, Technical details: Csdeizlh Hepfx Aahspw Machine weight approx.: 8 t Space requirement approx.: 2.95 x 1.6 x 2.36 m Chuck diameter: 250 mm Swing diameter: 265 mm X-travel: 170 mm Z-travel: 200 mm Spindle speeds: 1,500 rpm Spindle bearing diameter: 100 mm Pick-up machine

Būklė: naudotas, Gamybos metai: 2002, Technical details: Maximum wheel diameter: 130 mm Wheel width: 170 mm Maximum module: 3 Minimum module: 0.5 Cedowdyx Uepfx Aahjpw Total power requirement: 48 kVA Machine weight approx.: 9 t Space requirements approx.: 7.64 x 3.14 x 3.25 m For technical data, please refer to the attached PDF file.

Būklė: naudotas, Gamybos metai: 2005, Didžiausias perdavimo santykis 10:1 Dantų skaičius - min. 3 Dantų skaičius - maks. 200 Danties aukštis 20 mm Danties plotis maks. 58 mm Įrankio skersmuo min. 69,85 mm Įrankio skersmuo maks. 230 mm x ašis 325 mm y ašis 350 mm z ašis 470 mm Ruolio stalas - Ø 212,71 mm b ašis +90,1 / -1° Valdymas SIN 840 D SIEMENS Cpodpfx Ajynmm Eeahew Bendras energijos poreikis 75 kW Staklių svoris apie 10 000 kg Reikalinga vieta apie 6,10 x 4,40 x 3,30 m WAGURI su EWAB užkrovimo ląstele, pagaminta 2012 m. (linijinis užkrautuvas) Aušinimo skysčio filtravimo įrenginio nėra

Būklė: naudotas, Gamybos metai: 2007, Didžiausias perdavimo santykis 10:1 Dantų skaičius - min. 3 Dantų skaičius - maks. 200 Danties aukštis 20 mm Įrankio skersmuo min. 69,85 mm Danties plotis maks. 58 mm Įrankio skersmuo maks. 230 mm x ašis 325 mm y ašis 350 mm z ašis 470 mm Rušinio stalas - Ø 212,71 mm Codeynbdljpfx Aahepw b ašis +90,1 / -1 ° Valdymas 160 i - MB FANUC Bendra galios poreikis 75 kW Mašinos svoris apie 10 000 kg Užstatymo matmenys apie 6,10 x 4,40 x 3,30 m WAGURI Su EWAB robotizuota ląstele (KUKA robotas) be aušinamojo skysčio filtravimo įrenginio Gaisro gesinimo sistema be CO2 balionų Aušinimo alyvos grąžinimas su įvairiomis pompomis / surinkimo talpa Įvedimo įrenginys A1/B2 ašims su matavimo jutikliu Tvirtinimo įtaisas vienai krumpliaračio ašiai Išorinis veleno alyvos aušintuvas Siurbimo įrenginys „krumpliaračio ašiai“

Būklė: naudotas, Gamybos metai: 1997, Wheel diameter - max. 215 mm Wheel width 40.65 mm Module - max. Total power requirement 20 kW Machine weight approx. 10 t G L E A S O N (USA) CNC Grinding Machine for Spiral and Hypoid Bevel Gears Model PHOENIX HG 200 Year of construction 1997 Max. external diameter of workpiece: 215 mm Tooth profile size (height x width): 16 mm x 40.65 mm Number of teeth: 5 - 200 Maximum gear ratio: 1 : 10 Grinding wheel diameter: 51-190 mm Grinding wheel speed: 1,000 – 6,000 rpm X-axis (horizontal): 152 mm Y-axis (vertical): 178 mm Z-axis (sliding base): 304 mm Distance machine center to workpiece spindle face: 115 mm Axis speed: 125 mm/sec Workpiece spindle speeds: 0-30 rpm Workpiece spindle bore, tapered: 3 29/32 inches Total drive approx.: 20 kW - 380 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special equipment: • FANUC – 7-axis CNC control type 150 MB with monitor and direct data entry, automatic calculation of all workpiece and grinding parameters • Large, sophisticated coolant system with filtration, band filter, etc. • Powered grinding wheel dressing device with CNC-controlled compensation for wheel form and diameter after each dressing cycle • Gear grinding can be performed either as single part processing with conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. Grinding wheels can be made of CBN or conventional “dressable” aluminium oxide, depending on cost. Grinding with a conical wheel provides advantages in terms of heat management and contact pattern quality. Therefore, these bevel gear sets (automotive industry) can be manufactured in high quality, with consistent accuracy, cost-efficiently, and with short setup times. Please refer to the brochure copy on our website for additional details. Cjdpet Hwxhofx Aahepw Condition : very good – can be demonstrated under power Delivery : ex stock - as inspected Payment : strictly net – upon receipt of invoice We look forward to your order. Further gear manufacturing machines always in stock. X-axis (horizontal): 152 mm Y-axis (vertical): 178 mm Z-axis (sliding base): 304 mm Distance machine center to workpiece spindle face: 115 mm Axis speed: 125 mm/sec Workpiece spindle speeds: 0-30 rpm Workpiece spindle bore, tapered: 3 29/32 inches Total drive approx.: 20 kW - 380 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special equipment: - FANUC – 7-axis CNC control type 150 MB with monitor and direct data input, automatic calculation of all workpiece and grinding parameters - Large, sophisticated coolant system with filtration, band filter, etc. - Powered grinding wheel dressing unit with CNC dressing control for automatic form and diameter compensation after each dressing - Gear grinding can be performed either as single part processing with a conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. These grinding wheels can be made of CBN or conventional dressable aluminum oxide wheels (cost dependent). Grinding with a conical grinding wheel...

Būklė: naudotas, Gamybos metai: 1980, Wheel diameter - max. 1010 mm Wheel width 0 mm Module - max. Module - min. Cpodpfxjt Hwnie Aahew Total power requirement 15 kW Machine weight approx. 9.5 t Space requirement approx. m G L E A S O N (USA) "CURVIC-Coupling" - Automatic Coupling Grinding Machine Type 120 (888), Year of manufacture 1980 Serial no. 763402 Max. tooth height 10 mm Max. swing diameter of workpiece 1,010 mm Max. outside diameter of CURVIC teeth 610 mm Retraction of workpiece slide plate 216 mm Max. distance grinding wheel to workpiece nose 90-430 mm Max. workpiece weight incl. clamping device approx. 500 kg Number of teeth range 32 - 150 Grinding wheel diameter approx. 152 - 320 mm Grinding wheel speed, stepless 0 - 3,600 RPM Workpiece spindle bore 60 mm Total drive power approx. 15 kW - 380 V - 50 Hz Weight approx. 9,500 kg Accessories / Special equipment: Automatic rough grinding and finish grinding by means of presettable counters and integrated feed curves Counter for number of teeth Counter for number of dressing cycles 2 mounted dressers with 3 dressing diamonds for external dressing, internal dressing, and dressing wheel tip Mounted index plate for 48 teeth Separate coolant unit with band filter, separate hydraulic system Freestanding oil mist extraction unit by TRION, various small parts

Būklė: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 986003, šlifavimo rato greitis: 6 000 aps./min, įrankio skersmuo: 230 mm, X ašies eiga: 325 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 470 mm, TECHNICAL DETAILS Maximum transmission ratio: 10:1 Number of teeth: 3 - 200 Tooth height: 20 mm Maximum tooth width: 58 mm Control system: SIN 840 D SIEMENS Axes X-axis: 325 mm Y-axis: 350 mm Z-axis: 470 mm B-axis: +90.1° / -1° Codpfxsv Rcn He Aahepw Spindle Grinding spindle speed: stepless up to 6,000 rpm Workpiece spindle speed: 1,200 rpm Tooling Maximum tool diameter: 230 mm Minimum tool diameter: 69.85 mm Table diameter: 212.71 mm MACHINE DETAILS Total connected load: 75 kW Machine weight: approx. 10,000 kg Required floor space: approx. 6.10 m x 4.40 m x 3.30 m Transport dimensions machine: 4 x 2.5 x 2.85 m / 11 t Transport dimensions coolant tank: 3.55 x 2.41 x 2.5 m / 1.8 t Transport dimensions cooler: 1.5 x 0.8 x 1.1 m / 0.2 t Transport dimensions sheet metal: 2.5 x 1.1 x 0.8 m / 0.25 t EQUIPMENT - Coolant filtration unit Hoffmann HSF 100 V