Gręžimo staklės

IMATEC FU-145

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor B, Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C (NEW) Geometrically overhauled with acceptance protocol for new machine tolerances! Technical Data: - Machine No. 90-1495 - Centre height: 165 mm - Centre distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock Morse taper 3 - Feed rates from 0.015 to 0.46 mm/rev - Possible threads: Metric, Imperial, Module and Diametral Pitch - Metric thread pitches from 0.18 to 28 mm - Weight approx. 1100 kg - Spindle brake engageable - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: - 3-axis digital readout by K&C, new, with 12 months manufacturer warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving function, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal, - Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments - 160 mm 3-jaw chuck with two sets of jaws, NEW - Multifix quick change toolpost, size A, with 2 new tool holders - Bed stop - Electric chuck guard, NEW - LED machine lamp, NEW - Rear splash guard - Operating manual - Coolant system - Machine feet Lredpfx Asvambcjf Iog About the machine: Offered is a Weiler Condor B lead and feed screw lathe, geometrically overhauled and in as-new condition. The guideways have been reground or newly hand-scraped. Supplied with a certified inspection protocol. A very attractive machine with electronic spindle protection. The accessories — collets, chuck, and Multifix — are new. Spindles, nuts, bearings, belts, and wipers have been renewed. You are welcome to inspect this machine under power at our premises and see its condition for yourself.

Sąlyga: naudotas, Gamybos metai: 2017, mašinos/transporto priemonės numeris: 119, Ref. No. 24217 Technical Specifications: - Max. working width: 2520 mm Lrsdpfxstpnpls Af Ieg - Max. material thickness at 40 kp/mm² tensile strength: 3.5 mm - Adjustable bending angle (pre-selectable) - Upper beam drive: 400 V / 1.1 kW - Bending beam drive: 400 V / 4.0 kW - Required space: approx. W 3900 x H 1550 x D 1200 mm - Weight: approx. 4500 kg

Sąlyga: naudotas, Slot length: 300 mm Slot width: 34 mm Slot depth: mm Cutting speed: 6 m/min Return speed: 6 mm/min Clamping plate: 380 x 300 mm Lrsdpod Ih Uiofx Af Isg Machine weight: approx. 285 kg Space requirement: approx. 590 x 1150 mm Bore diameter min. - with special slotting tools: 6 mm - with slotting inserts: 20 mm - with standard slotting bar: 40 mm Electromagnetic brake Supplied with extensive accessories (see pictures)

Sąlyga: naujas, Gamybos metai: 2025, veikimo valandos: 1 h, Digging depth: 1.65 meters Lifting capacity: up to 150 kg Ground pressure: 0.35 kg/cm² Hydraulic system working pressure: 160-210 bar Dimensions: 255 x 90-110 x 222 cm (LxWxH) Slew range: 360°, with a slewing speed of 13 rpm Articulated boom Joystick control Adjustable undercarriage Technical data: Manufacturer: HZC Power GmbH Model: DKB991 Engine: Koop diesel engine, 9.5 HP/7 kW Cooling: Hydraulic oil cooler Max torque: 25 Nm Max. speed: 3600 rpm Digging force: 5.5 kN, lifting force: up to 150 kg Fuel tank capacity: 5.5 liters Electric starter: 12 volt Maximum climbing ability: 25° Maximum speed: 2 km/h Ground pressure: 0.35 kgf/cm² Rubber track chassis dimensions: 1090 x 180 x 320 mm (LxWxH) Hydraulic oil tank capacity: 17 liters (HLP46) Pump type: gear pump Swing radius: 360° Swing speed: 13 rpm Hydraulic pump: gear pump Working pressure: 160 bar Maximum pressure: 210 bar Breakout force at the bucket: approx. 650 kg Hydraulic flow: 30 liters per minute Digging depth: 1650 mm Dump height: 2150 mm Reach at ground level: 3000 mm Ledpfx Ajvz Ih Tsf Isrg Dimensions: 2550 x 900-1100 x 2220 mm (LxWxH) Lifting capacity: 600 kg Product/shipping weight: 940 kg Features: Articulated digging arm (120°), hydraulically adjustable chassis from 90cm to 110cm, additional hydraulic connection on the digging arm for hydraulic attachments

Sąlyga: geras (naudotas), Gamybos metai: 2008, Teile, die von Hand gezeigt werden, sind nicht im Lieferumfang enthalten. 12.000 U/min. X 610 mm. Y 420 mm. Z 450 mm. Lodpfx Afjuc Tpgo Iorg

Sąlyga: naudotas, Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 4 700 mm, Y ašies eiga: 2 250 mm, Z ašies eigos atstumas: 1 300 mm, bendras plotis: 3 000 mm, bendras ilgis: 8 710 mm, bendras aukštis: 5 250 mm, ašies skersmuo: 130 mm, stalo apkrova: 16 000 kg, stalo ilgis: 2 200 mm, stalo plotis: 2 200 mm, bendras svoris: 40 000 kg, Accessories: Lrjdpfx Afjw Hr Hps Ijg 2 different heads 1 faceplate

Sąlyga: labai geros būklės (naudotas), Knuth UFM 2 Universal Milling Machine Technical Specifications Travelling distance X-axis (manual): 800 mm Travelling distance X-axis: 750 mm Travelling distance Y-axis: 300 mm Travelling distance Z-axis: 400 mm Table size: 1320x320 mm T-slots: 5x14x63 mm Lrsdpfonfu Riex Af Iog Feeds Y-axis travel (8): 20 - 360 mm/min Z-axis travel: 600 mm/min Spindle speeds (12): 58 - 1800 rpm Vertical spindle taper: SK 40 Distance between spindle nose and table: 0 - 400 mm Head swivel: 45° Horizontal spindle taper: SK 50 Drive Main motor power: 4 kW Z-axis motor power: 0.75 kW Feed motor power: 0.55 kW Coolant pump motor: 0.09 kW Coolant pump capacity: 25 l/min Dimensions and Weight Dimensions: 1900x1720x1750 mm Weight: 2100 kg More items – new and used – can be found in our shop! International shipping costs on request!

Sąlyga: geras (naudotas), 1 x Drilling and Tapping Machine Manufacturer: Wörner Model: BG 16 with pneumatic feed (Manual drilling also possible) Coolant system included Lodoipyiwopfx Af Iorg Technical Data: Spindle speeds: 95 - 3,500 rpm (24 steps via belt pulley, 2 via motor) Spindle taper: MK 2 Drilling capacity in steel: 16 mm Tapping capacity in steel: M 8 The machine can be inspected under power.

Sąlyga: labai geros būklės (naudotas), Ansemi parallel lathe, model Mono FAP 325 ES, distance between centers: 1500 mm, center height: 325 mm, spindle bore: 65 mm, motor power: 18 kW, overall dimensions: 3300 x 1200 x 1700 mm (H), weight: 3260 kg. Ledpfx Afowcd Hms Iorg

Sąlyga: geras (naudotas), Su skaitmeniniu ekranu Su gręžimo ir frezavimo galva Judėjimo eigą 330 x 400 x 475 mm Stalo prispaudimo plotas 650 x 245 mm Lrsdpfx Aew Nnutjf Iog Veleno laikiklis ISO 40 Veleno apsukos 63–2 800 aps./min. Įvairūs priedai MARCELS MASCHINEN CH