Briaunų apklijavimo mašina

IMA Advantage 400

Single-Sided Edge Banding Machine Advantage 400

Equipment:
- Working length: 6700 mm
- Release agent application top and bottom
- Joint trimming unit 08.380
- Preheating nozzles 300 mm long, 2 x 1.5 kW for pre-warming the workpiece edge
- Gluing unit 283.1516 with toothed belt drive
- Strip monitoring system to prevent faulty gluing
- End trimming unit for front and rear edges of the workpiece
- Space provision for gloss edge lubricant spray unit
- Milling unit 08.0561
- Copying milling unit SKF-L
- Profile scraping unit 08.519
- Upper and lower spray nozzles for applying cleaning agents
- Self-guiding scraper unit 08.521
- Buffing unit 08.617-2
- Interior lighting
- Electronic height adjustment of upper pressure beam (one-sided)

Technical Data "Workpiece":
- Minimum workpiece length: 150 mm
- Minimum workpiece width: 65*/ 150 mm (*at max. workpiece thickness of 25 mm)
- Minimum workpiece thickness: 8 / 12* mm (*with profile scraper)
- Maximum workpiece thickness: 60 mm
- Smallest workpiece: 65x380 / 150x380 x 19 mm
- Processing allowance per workpiece edge: 0 - 5 mm* (*observe max. cutting cross-section)
- Workpiece form: Rectangular
- Material: Chipboard, MDF
- Surface material: Direct coating (melamine resin paper), paper, foil, veneer
- Lateral overhang of coating material: 0 mm

Technical Data "Edge Material":
Roll material without foil*:
- Paper & plastic edges: 0.3 - 3.0 mm
(*Foil only with additional equipment)
- Veneer edges: 0.5 - 3.0 mm
Max. edge cross-section for veneer: 150 mm²
Max. edge cross-section for plastic edge: 180 mm²
Pre-cut edge strips: laths 3.0 - 12.0 mm
Max. lath cross-section: 600 mm²
Min. edge height: 12 mm
Max. edge height: 65 mm
Max. upper edge overhang: 2 mm
Edge profiles:
- Paper edge approx. 0.4 mm (bevel 15°)
- Plastic edge up to 3.0 mm (radius depends on tooling)
- Lath up to 12 mm (flush milling)

Technical Data "Machine":
Working length: 6700 mm
Feed speed: 20 m/min for Advantage 400
Constant workpiece projection in chain track: 35 mm + edge thickness
Max. trimming cross-section: 520 mm²
Min. pass-through width (at 35 mm projection): 65 mm
Min. workpiece length in feed direction: 150 mm
Base height (top edge of chain track): 900 mm
Aggregate side: Left in feed direction
Control voltage: 24 V DC / 230 V AC
Fgedsitu Easpfx Acuoh
Supply voltage: 3/N/PE, 400/230 V, 50 Hz, +/-5%
(RCD circuit breaker not applicable)

Machine Control ICOS Expert:
Features:
- PC-based control system with integrated PLC and electronic track control
- Simple, operation-oriented program creation
- Navigation and operation via touch screen
- Program memory for up to 1000 programs
- 3-digit numerical program number
- Control system prepared for service portal
Control Technical Data:*
- Panel PC with integrated 15" TFT display, with touch screen
- USB interface
- Fast EtherCAT interface (fieldbus)
- Ethernet network connection RJ45 in control cabinet
- Operating system: Windows with TwinCAT for real-time control

Note:
The technical data and descriptions are transcribed from the original order confirmation. Data is for informational purposes only and not binding.

Condition:
- Machine fully overhauled
- Upper pressure belt new
- Feed chain new
- Tracing wheels and post-processing tools new

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.