Apdirbimo centras

SCM TECH 90 SUPER

Sąlyga: naudotas, Gamybos metai: 2023, The machine is available for demonstration at our warehouse in Blomberg. Equipped with 1 HD pump Binks Maple 8/25 up to 175 bar and 4 units of Sames-Kremlin AVX Airmix spray guns. The machine features a changeover valve for rapid color changes, a lever switchable for up to 3 color circuits, and 1 cleaning agent pump (options available). The machine is supplied in ATEX (explosion-proof) specification. - Manufacturer: Ka-Ma - Model: KR BM 1000 B - Year of manufacture: 2023 - Working width: 1,200 mm (1,300 mm) - Spray gun drive: single version - Dry extraction Csdpfxoumvnhj Admoaa - Belt conveyor system - Continuously variable feed speed: 2–8 m/min - With paint recovery system - Gun control: PLC, LS - Installed color circuits: 3 - Number of installed spray guns: 4 - Spray guns: Sames/Kremlin AVX, Airmix - Airmix spray system - Height-adjustable spray guns: 150 mm - Pumps manufacturer: Binks Maple 8/25, up to max. 175 bar - Including supply air filter ceiling - Suitable for both water-based and solvent-based paints - Exhaust air capacity: 12,000 m³/h - Length: 3,243 mm - Width: 3,482 mm - Height: 2,450 mm - Voltage/Frequency: 400 V / 50 Hz - Color: RAL 7035, light grey - Weight: 3,100 kg _____ Optionally, we can also offer installation and commissioning of the system, as well as operator training for your staff. On request, we also provide regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us!

Sąlyga: naudotas, Gamybos metai: 2009, HOLZ-HER Edgebander CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speed: Infinitely variable feed from 12–30 m/min (depending on equipment) - With adjustable infeed table in the magazine area (max. adjustment range 30 mm) - With height-adjustable magazine disc for modifying the lower edge overhang - Large magazine disc Ø 820 mm for edge coils up to Ø 800 mm - With transport chain incl. automatic central lubrication - With motor-driven, position-controlled bridge height adjustment - With pneumatic stop roller for shortest workpiece spacing - With extendable workpiece support (extension length 1600 mm) - With space-saving, pneumatically operated sliding hoods over the entire machine (deviations possible on individual aggregates) - With motorised infeed fence - With spray oiler for lubricating all joints and bolts (including operating hour counter) - With central connection for extraction (2x Ø 200 mm) - With integrated chip collection box at the end of the machine (when radius scraper unit installed) Control PPC 231 - Power PC for efficient setup and tool changes - 15” SVGA touch screen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - All information in clear text and/or graphics - Rotatable and swivelling operator console at eye level - Dust-proof membrane keypad with soft keys (pushbuttons) - LED indicator for aggregate preselection - Program list with program names and numbers - Extensive program memory - Individual selection of aggregates with functions for basic settings, set point values, position points, and tool corrections, as well as fixed position points Codjvvkfdepfx Admeaa - Setup operations for aggregates and axis settings centrally and clearly via fine adjustment (depending on equipment) - Interval display for minimum workpiece distance - Integrated position control - Position points generally or program-specifically controlled - Clear and complete capture of all operating data - Service messages in plain text - Diagnostic system - Incl. integrated synchronous bus system for high accuracy in aggregate control - Individual management for up to ten users, incl. password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 – Belt bridge Options and accessories for the base machine Spraying unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled separating agent spray unit with separating agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing milling unit 1961 and flat scraper 1964) Jointing milling unit Jointing milling station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) - With two plunge-controlled milling units - 1 unit counter-rotating - 1 unit co-rotating - Plunge depth 5 mm - With static frequency converter 200 Hz - Without milling cutters - With ProLock screw-in chuck for quick tool change Tooling for 1803 (workpiece height up to 60 mm): Diamond cutters PRO UT, 2 pcs. (front and rear) incl. protective hoods Ø 100–63 - Ø 30 mm, Z = 3 + 3 + 3, 1x LH, 1x RH Noise-reduced cutter with integrated chip guide, DFC technology (Leitz system) Maximum chip removal 2 mm at 60 mm height

Gamybos metai: 2018, Sąlyga: labai geros būklės (naudotas), comprising two toothed belt axes EGC-80-1300-BS-10P-KF-0H-ML-GK and four linear guide rails HGR 20C 1705V9-10A00 with HIWIN linear block HGW CCC 170 3W3-10200. Two Unimotor 075E3C300BACAA075140 with two EMERSON UNIDRIVE M 701-3200050A. Caedpfxeg Ixumo Admsa

Sąlyga: geras (naudotas), Gamybos metai: 2007, Technische Merkmale: - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Tiefe bei max. Zapfendurchmesser 320 mm: 105 mm - Zapfenwagen-Geschwindigkeit min./max.: 0/100 m/min - Min./max. Profiliergeschwindigkeit: 3/15 m/min Zapfenbearbeitung: 1. Endabschneidsäge - 5,5 PS (4 kW) - Sägeblatt-Ø 400 mm 2. Zapfenfräser - Gegenlager 50 x 620 mm - 15 PS (11,3 kW) - Max. Werkzeug-Ø 320 mm - Achshub 575 mm - Automatischer Splitterschutz 3. Zapfenfräser - Gegenlager 50 x 620 mm - 15 PS (11,3 kW) - Max. Werkzeug-Ø 320 mm - Achshub 575 mm - Automatischer Splitterschutz - Vertikale Positionierung mit durchgehender Achse 4. Digitale Winkeleinstellungsspannung Profilieren: 5. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Achshub 280 mm - Zeitverzögerte Splitterschutzvorrichtung bei Kalibrierung - Doppelte Drehrichtung - Vertikale und horizontale Positionierung mit durchgehender Achse 6. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Achshub 280 mm - Vertikale und horizontale Positionierung mit durchgehender Achse 7. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Vertikale und horizontale Positionierung mit durchgehender Achse 8. Abschluss-/Aufnahmestation - Vertikale und horizontale Positionierung mit durchgehender Achse - Vorrichtung zum Ausziehen des Fensterladens Cedpfx Adet R T Hcsmoaa - Hfutwt78Z 9. Untere horizontale Nutwelle - Vertikale und horizontale Positionierung mit durchgehender Achse - 88,5 PS (66,4 kW) 10. Digitale Führung 11. Teile-Rückführung zum Bediener

Sąlyga: naudotas, Gamybos metai: 1985, Svoris: apie 3000 kg Matmenys: apie 3700 x 2000 x 1600 mm Sandėliavimo vieta: Nattheim Cajdpfevvi Ttsx Admja

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, Machining centre Rover 20 Working area: 2,893 x 950 mm, milling spindle with ISO30 tool holder, 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills, as well as a grooving saw, 6-position tool changer. The NC410 control unit is equipped with a floppy disk drive, colour screen, and offers basic, graphically assisted programming capabilities. The Rover 20 also already allows for pendulum (pendulum processing) operations. Cjdpfolc Dwnox Admeaa Dimensions: approx. 3,800 x 2,000 mm, height 1,600 mm Control cabinet: 950 x 700 x 1,300 mm Available immediately from site.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 9673240, šlifavimo plotis: 1 100 mm, galia: 15 kW (20,39 AG), aukščio reguliavimo tipas: elektrinis, šlifavimo juostos ilgis: 1 900 mm, suslėgto oro jungtis: 6 juosta, šlifavimo juostos plotis: 1 120 mm, Combination sanding unit with contact roller and air sanding pad Brush roller Sanding belt tension pneumatic, motorized thickness adjustment Technical specifications: Max. working width: 1100 mm Cedpfx Aetppzvedmoaa Max. workpiece thickness: 150 mm Min. workpiece thickness: 3 mm Sanding belt size: 1900 x 1120 mm Feed speed: 5/10 m/min Sanding unit motor power: 15 kW Height adjustment motor power: 0.50 kW Feed conveyor motor power: 0.5/1.0 kW Operating pressure: 6 bar Air consumption: approx. 20 l/min Extraction port: 2 x 200 mm Weight: approx. 2100 kg Machine width: approx. 1750 mm Machine depth: approx. 1700 mm Machine height: approx. 1900 mm

Sąlyga: naudotas, • Workpiece width: min. approx. 190 mm - max. 2600 mm Codpfx Adjur Uzqemeaa • Workpiece thickness (mm): 8 - 90 • Adjustable workpiece overhang (mm): 10 - 120 • Working height from floor (mm): 905 • Feed rate continuously adjustable (m/min): 5 - 25 • Magnetic braking of feed motor • Max. adjustment speed (m/min): 3 • Transport chain with cams: cam spacing 900 mm, cam height adjustable up to 20 mm 3 motors per side: • 1st scorer: 1.5 kW controlled • 2nd cutter: 4.5 kW, swivelling 15° • 3rd milling motor: 4.5 kW, electro-pneumatic control for plunge milling, swivel range 90° • Free position: for mounting a standard milling unit

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Single-sided automatic edge banding machine with jointing unit, hot-melt glue application on straight workpieces (EVA/PUR glue pot with discharge function optional), 2-motor high-frequency end trimming station, HF combination milling unit, corner rounding unit, chain feed, motorized top pressure with encoder and ball-bearing double roller top pressure, extendable workpiece support rail, signal lamp for workpiece sequence, integrated line control for contactless control of processing functions, as well as L-Motion control (6-axis). Suitable for ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece height from 10 – 60 mm. • Two counter-rotating, application-controlled jointing units with diamond-tipped spiral jointing cutters ensure clean and tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof design with glue supply from below (excess glue is automatically recirculated to the glue pot), precisely controllable glue application via glue roller, separate adjustable glue roller temperature, electronic temperature control with automatic stand-by function (prevents glue from burning if the machine is not used for a longer period but remains switched on). Optional: EVA/PUR glue pot with discharge/cleaning function for quick colour change Optional: Quick-change system for glue pot Caodpfx Adsl Rix Eomja • Pressure zone consists of a driven pressure roller synchronised with the glue roller and two smaller, oppositely tapered pressure rollers with spring tension, ensuring optimal bonding of the edging material to the workpiece. Motorized adjustment of the pressure zone (1x L-Motion) • High-frequency cross-cut saw equipped with two HF motors 0.55 kW, 12,000 rpm, two saw blades. Pneumatic swiveling from operator panel • High-frequency combination milling station, 2 powerful 0.55 kW high-frequency motors with carbide-tipped special cutters Motorized adjustment of the milling station (4x L-Motion) • Corner rounding unit: Automatic processing of front and rear corners up to 2 mm edge thickness for PVC/ABS edging material. (Not recommended for soft- and post-forming profiles). Option for single-sided (front or rear) or double-sided corner rounding. Motorized adjustment of the corner rounding unit (1x L-Motion) • Swiveling control panel with 10″ colour touchscreen, length counter and remote access module • Standard equipment includes LED lighting and LED-Motion system • Optional: Motorized infeed fence adjustable from the control panel (1x L-Motion) Optional finish units (3 free spaces): -Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder, radius changeover R1/R2 via pneumatic switching from the control panel -Flat scraper unit: Removes glue residues from the glue joint area with a gentle scraping action, pneumatic ON/OFF control via air cylinder -Polishing unit: 2 motors with 0.09 kW, 1,500 rpm provide a high-quality finish

Sąlyga: labai geros būklės (naudotas), SINGLE-SIDED FLEXIBLE EDGE BANDING MACHINE INSERT FOR LOT 1 Edge thickness in rolls (min/max) mm 0.3 - 3 Panel thickness (min/max) mm 8 - 60 Control ICOS open Feed speed m/min (adjustable) 7-35 Caedoifnzdjpfx Admsa Top pressure belt driven, spraying unit (for liquid anti-adhesive) Adjustable stop ruler CNC controlled. Panel infeed system A2 / 30 Jointing milling unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing unit (P.U.R. glue + pre-melter) 2 - VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartment no.) 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m / min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Sprayer unit (for sliding fluid) Contour milling unit (for fine milling) CNC controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Sprayer unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 Universal milling units (CNC controlled) for grooving/rebating and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)