Briaunų apklijavimo mašina

IMA Klessmann Novimat Concept /I/G/80/650/R3

Sąlyga: labai geros būklės (naudotas), Single-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm: 0.3 - 3 Edge thickness in strips (min/max) mm: 3 - 12 Panel thickness (min/max) mm: 8 - 60 Control: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: driven by V-belt Sprayer unit (for liquid anti-adhesive) Jointing unit 08.376 (2 x 3 kW) Gluing unit (hot-melt adhesive) 283.1513 Edge pressure zone Edge magazine for rolls (compartment no.): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius milling and contour milling unit) 08.342 (2 x 0.66 kW) Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.612 (2 x 0.25 kW) Knjdpfxeflc Uho Adkod

Sąlyga: naujas, Gamybos metai: 2025, Įvairūs klijų bakai kraštų juostoms ir kraštų juostavimo mašinų keturkampiams apdirbimui. Ksdpfx Aof Tc Rqjdkend Tiekiame naujus klijų bakus arba remontuojame jūsų naudotus. Taip pat parduodame atskiras atsargines dalis. SCM, Stefani, IDM, IMA, Biesse

Sąlyga: labai geros būklės (naudotas), Single-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Edge thickness in strips (min/max) mm 3 - 12 Panel thickness (min/max) mm 8 - 60 Control system: ICOS open TS Feed speed m/min (adjustable) 4 - 20 Ksdped Nuu Hjfx Adkjnd Top pressure: driven by V-belt Spraying unit (for liquid anti-adhesive) Jointing cutter unit 08.376 (2 x 3 kW) Gluing unit (hot melt adhesive) 283.1513 Edge pressure zone Edge magazine for rolls (compartment no.) 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius milling and profile milling unit) 08.342 (2 x 0.66 kW) servo Profile scraping unit 08.519 Flat scraping unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Sąlyga: naudotas, Holz Her Accura 1556 Premium Heavy-duty version with full equipment Edge thickness 0.4 - 20 mm 18.5" touchscreen control in 16:9 format, swiveling and pivotable Synchronized belt bridge with motorized, position-controlled height adjustment Long, motorized adjustable infeed guide Pre-milling unit for joining before the gluing station with 2 NC servo axes Syncro edge magazine, fully automatic for coil and strip material MOT3, with 2 motorized pressure rollers Gluing station GLU-JET automatic. For cartridges and PU gluing. Thin-film technology Glue height adjustment / sensor nozzle Maximum edge height 60 mm Pressure unit with 4 rollers, motor-pneumatic. NC servo axis End trimming unit for coil and strip materials up to 20 mm edge thickness, with electro-pneumatic adjustment from 0-10° bevel of the saws Flush trimming unit 20 mm MOT3, motorized horizontal adjustment Multi-function milling unit MOT6 with multifunctional milling technology Flush trimming 8 mm Radius milling R1, 3; R2 (2x) Chamfer milling up to 45° Copy milling unit MOT4, with automatic tool changer MOT2 and oscillating probe, corner copying, postforming corners, with 4 NC control axes, for milling the upper and lower longitudinal edge and copy milling the front and rear vertical edges. Working height 60 mm. R1, 3; R2 (2x); Chamfer 45° Scraper unit MOT8 incl. high gloss package and fully automatic tool changer, R1; R1.3; R2 (2x); Chamfer 45° Nesting package Knsdpfx Adsxnmu Ieked Face scraper unit with pre- and post-sensing Usage-controlled, oscillating buffing unit for finishing and edge polishing with 2 textile discs Spraying device in infeed and outfeed area, as well as antistatic agent at the pressure unit Infeed area electronically controlled release agent spraying device Pressure unit electronically controlled antistatic spray device Outfeed area electronically controlled cleaning agent spraying device with cleaning agent Automatic chain lubrication Barcode scanner Machine has FACTORY SERVICE and is in TOP CONDITION Year of manufacture 2021 / Leasing possible Machine is connected and ready for demonstration at the exhibition center Available from stock Lieboch

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, veikimo valandos: 278 h, Max. workpiece size for trimming X = 3620 mm Maximum travel: X = 3865 mm Minimum room height: 3.20 m Processing in Y and Z Y = 1600 mm; Maximum panel width: 2000 mm Maximum workpiece height: 300 mm Measured from top edge of vacuum cup: 125 mm MACHINE OPERATION SOFTWARE CAMPUS V7 Plus CAD/CAM software, 1 x license incl. CabinetControl Base and material removal simulation 1 software license secured by USB dongle for the machine CabinetControl Base Software for furniture design and production CAMPUS V7 PLUS, software for CNC machining centers ADDITIONAL MODULE HIGH-SPEED MILLING Control system Siemens Industrial PC control Handheld control device for remote operation of the machine MILLING HEAD 5-axis head 7840, power: 12 kW n(max.) = 0 - 24,000 rpm, stepless adjustment Cardanically mounted; C-axis rotatable +/- 360°, A-axis rotatable +/- 180° Liquid cooling (cooling unit included) with HSK-F 63 tool holder Max. tool weight 6 kg Milling tools: max. Ø 200 mm Saw blades: max. Ø 350 mm with optional 7886 Pick-Up changer DRILLING UNIT Pressure booster to increase standard pressure from 6 to 8 bar Drilling unit 7881, 24 spindles Drive power 3.0 kW, incl. saw unit 18 individually selectable vertical spindles Arranged in L-shape, 11+2 in X-direction, 6 in Y-direction, 32 mm pitch n(max.) 1,000–5,710 rpm, stepless adjustment 6 horizontal spindles 2 double-drilling spindles in X-direction 1 double-drilling spindle in Y-direction including saw unit Integrated sawing unit for sawing/grooving in X-direction n(max.) 1,000–7,330 rpm, stepless adjustment MACHINE TABLE Machine table: 6 consoles, pneumatically clamped, movable in X-direction Display and positioning of consoles and suction cups via the program 2 lateral stops at field A and D, 2 large-area pushbuttons for clamping and releasing workpieces, 2 tape measures for positioning consoles in X, referring to stop at field A/D, tape measure indicators for suction cups at every console in Y, referring to rear stop STOPS 2 additional processing fields at the front for 6 consoles (4-field processing) 4 pneumatically controlled stops per field, one stop per console and one stop laterally in X-direction LOADING AIDS 4 pneumatically liftable and lowerable loading aids for easy handling of heavy parts TOOL CHANGER Tool changer 7996, 18-position magazine (carousel), automatically moves in X-direction Mobile tool changer 7886, single-position saw blade magazine Specifically for large saw blade diameters up to 350 mm Pick-Up system installed on the gantry, pneumatically operated Max. tool diameter: Ø 350 mm Tool changer 7892, 16-position linear Pick-Up Ksdpfx Adjxfaf Usksnd VACUUM PUMP 140 m³/h dry-running LED lamp for the processing area. SAFETY OPTIONS Safety enclosure according to CE standard Safety fence on the side and rear EQUIPMENT VARIANTS AND ACCESSORY LUBRICATION Automatic central lubrication Gantry extension – ideal for 4-field processing and large workpieces. 2 controlled pneumatic modules for max. 5 frame clamping elements per field A/D Max. 5 frame clamping elements can be controlled simultaneously per module. Simultaneous opening/closing of connected frame clamping elements, incl. foot pedal for activation, max. 2 pcs per field A and D orderable. OPTIONAL: LASER – laser pointer Consisting of two laser pointers for positioning the vacuum cups.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008018, Uždedamos briaunos tipas: plona briauna, stora briauna, masyvi mediena Klijavimo sistema: EVA, PUR Sujungimo frezavimas: taip Knsdpewv Dfcofx Adked Multifunkcinis agregatas: taip Maks. padavimo greitis: 20 m/min Maksimali plokštės storis: 60 mm Darbiniai agregatai: 7 vnt.

Sąlyga: geras (naudotas), Gamybos metai: 2007, Technische Merkmale: - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Tiefe bei max. Zapfendurchmesser 320 mm: 105 mm - Zapfenwagen-Geschwindigkeit min./max.: 0/100 m/min - Min./max. Profiliergeschwindigkeit: 3/15 m/min Zapfenbearbeitung: 1. Endabschneidsäge - 5,5 PS (4 kW) - Sägeblatt-Ø 400 mm 2. Zapfenfräser - Gegenlager 50 x 620 mm - 15 PS (11,3 kW) - Max. Werkzeug-Ø 320 mm - Achshub 575 mm - Automatischer Splitterschutz 3. Zapfenfräser - Gegenlager 50 x 620 mm - 15 PS (11,3 kW) - Max. Werkzeug-Ø 320 mm - Achshub 575 mm - Automatischer Splitterschutz - Vertikale Positionierung mit durchgehender Achse 4. Digitale Winkeleinstellungsspannung Profilieren: 5. Rechtsprofilfräse Knsdpfx Adjt R T Hcjkjd - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Achshub 280 mm - Zeitverzögerte Splitterschutzvorrichtung bei Kalibrierung - Doppelte Drehrichtung - Vertikale und horizontale Positionierung mit durchgehender Achse 6. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Achshub 280 mm - Vertikale und horizontale Positionierung mit durchgehender Achse 7. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Vertikale und horizontale Positionierung mit durchgehender Achse 8. Abschluss-/Aufnahmestation - Vertikale und horizontale Positionierung mit durchgehender Achse - Vorrichtung zum Ausziehen des Fensterladens - Hfutwt78Z 9. Untere horizontale Nutwelle - Vertikale und horizontale Positionierung mit durchgehender Achse - 88,5 PS (66,4 kW) 10. Digitale Führung 11. Teile-Rückführung zum Bediener

Sąlyga: naudotas, Gamybos metai: 2009, HOLZ-HER Edgebander CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speed: Infinitely variable feed from 12–30 m/min (depending on equipment) - With adjustable infeed table in the magazine area (max. adjustment range 30 mm) - With height-adjustable magazine disc for modifying the lower edge overhang - Large magazine disc Ø 820 mm for edge coils up to Ø 800 mm - With transport chain incl. automatic central lubrication - With motor-driven, position-controlled bridge height adjustment - With pneumatic stop roller for shortest workpiece spacing - With extendable workpiece support (extension length 1600 mm) - With space-saving, pneumatically operated sliding hoods over the entire machine (deviations possible on individual aggregates) - With motorised infeed fence - With spray oiler for lubricating all joints and bolts (including operating hour counter) - With central connection for extraction (2x Ø 200 mm) - With integrated chip collection box at the end of the machine (when radius scraper unit installed) Control PPC 231 - Power PC for efficient setup and tool changes - 15” SVGA touch screen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - All information in clear text and/or graphics - Rotatable and swivelling operator console at eye level - Dust-proof membrane keypad with soft keys (pushbuttons) - LED indicator for aggregate preselection - Program list with program names and numbers - Extensive program memory - Individual selection of aggregates with functions for basic settings, set point values, position points, and tool corrections, as well as fixed position points - Setup operations for aggregates and axis settings centrally and clearly via fine adjustment (depending on equipment) - Interval display for minimum workpiece distance Kjdpfx Adsvvkfdjkend - Integrated position control - Position points generally or program-specifically controlled - Clear and complete capture of all operating data - Service messages in plain text - Diagnostic system - Incl. integrated synchronous bus system for high accuracy in aggregate control - Individual management for up to ten users, incl. password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 – Belt bridge Options and accessories for the base machine Spraying unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled separating agent spray unit with separating agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing milling unit 1961 and flat scraper 1964) Jointing milling unit Jointing milling station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) - With two plunge-controlled milling units - 1 unit counter-rotating - 1 unit co-rotating - Plunge depth 5 mm - With static frequency converter 200 Hz - Without milling cutters - With ProLock screw-in chuck for quick tool change Tooling for 1803 (workpiece height up to 60 mm): Diamond cutters PRO UT, 2 pcs. (front and rear) incl. protective hoods Ø 100–63 - Ø 30 mm, Z = 3 + 3 + 3, 1x LH, 1x RH Noise-reduced cutter with integrated chip guide, DFC technology (Leitz system) Maximum chip removal 2 mm at 60 mm height

Sąlyga: naudotas, Gamybos metai: 2013, Technical Data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power requirement: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical Features and Equipment General Functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double top pressure for workpiece stability Electronic thickness control Feed frequency inverter Automatic lubrication of the feed chain Automatic motor calibration Ksdpjv Szt Djfx Adkond Touchscreen control system Emulsion spray unit at infeed and outfeed Edge preheating Pre-milling Unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment Gluing Unit Adhesive and hot air application Heated application roller Quick-change complete unit Automatic motorized position adjustment 3 pressure rollers Edgebanding speed: 14 m/min End Trimming Unit Twin-motor unit with automatic tilting Tilting up to 15° THK prism guides Radius Milling Unit 2 tools Automatic adjustment in two axes Automatic overlap setting Copying Unit (2 motors) Automatic tool position change via servomotor Electromagnetic horizontal movement Vertically hydraulically damped movement

Sąlyga: naudotas, Gamybos metai: 2022, Used machine Year of manufacture: 2022 Condition: as new Kjdpfx Aowxz Uyjdkjnd With 6 months full warranty! Only 70 operating hours; the machine has not yet been used in production! Equipment and technical data: BASE MACHINE Holz-Her CNC machining center DYNESTIC 7535 10.5 Lift Machining length: 3100 mm Machine frame in welded design with ground and hardened prism guides for gantry, aggregate head, and consoles Gantry-type portal for high rigidity Rack and pinion drive, helical gear, in X and Y directions, 1 x ball screw in Z direction for precise positioning MATRIX table Solid, continuous machining table with grid layout, continuous grooves in X and Y directions, groove spacing 50 mm, includes 25 meters of sealing cord for clamping the sacrificial plate 1 processing field with reference stops Stop rail height 30 mm, pneumatically retractable. 2 stop rails in Y direction and 1 stop in X direction right (viewed from machine front) Remote maintenance Integrated network card for data transfer of control and program data. Data transfer via high-speed internet connection required at the machine. USB port For data backup or direct loading of machining programs at the control panel TECHNICAL DATA Machining dimensions 7535 10.5: Max. nesting table support area: X = 3100 mm Y = 1560 mm Max. travel paths: X = 4695 mm Y = 2305 mm Z = 565 mm Max. machining height 7535/7735 Classic without pusher: Z = 300 mm from table top (without sacrificial plate) Max. clearance height of the pusher above table for Push/Auto/Lift versions: Z = 250 mm from table top (without sacrificial plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min MACHINE OPERATION SOFTWARE CAMPUS V7 PLUS CAD/CAM software, 1 license incl. material removal simulation BetterSim 1 software license secured with dongle for the machine CAMPUS V7 PLUS, software for CNC machining centers: Comprising: 1. CAMPUS NC-HOPS 2. CAMPUS aCADemy 3. CAMPUS MT-Manager 4. CAMPUS Workcenter V7 PLUS 5. CAMPUS 3D material removal simulation BetterSim CAMPUS NC-HOPS Graphical variant system with WOP and CAD/CAM features for creating part variants using macro technology Hi-Speed USB device network server Allows use of the CAMPUS single license on the machine or an office computer within the same network – only one license can be used in the network at a time! Additionally: CAMPUS V7 PLUS CAD/CAM software, 1 license incl. material removal simulation BetterSim 1 software license secured via dongle for office or machine CAMPUS V7 PLUS, software for CNC machining centers: Comprising: 1. CAMPUS NC-HOPS 2. CAMPUS aCADemy 3. CAMPUS MT-Manager 4. CAMPUS Workcenter V7 PLUS 5. CAMPUS 3D material removal simulation BetterSim CAMPUS NC-HOPS Graphical variant system with WO