CNC 4 ašių apdirbimo centras

Ibarmia ZV 55 D1600

Būklė: geras (naudotas), Gamybos metai: 2011, Ref. No.: 10598 Manufacturer: HELLER Model: MC 2000 Year of manufacture: 2011 Control type: CNC control Controller: Siemens 840 D sl Location: Halberstadt Country of origin: Germany Machine No.: 50XXXX X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 1000 mm Working spindle torque (at 25% DC): 242 Nm Tool holder: SK 40 Number of tool stations in magazine: 54 Tool magazine equipped with: 80 pcs. Spindle speed: 10,000 rpm Main spindle drive power: 17 kW High-pressure pump: 50 bar Main spindle speed range: 10,000 rpm Number of pallets: 2 Pallet size (LxW): 630 x 500 mm Machine weight approx.: 13,000 kg Spindle hours: 7,000 h Operating hours: 14,000 h Set-up stations: 4 x 90° Hydraulic pressure: 200 bar Lsdpfxex Hn D Ro Apnjhn Additional information: - Machine has been measured - Geometry is in excellent (1A) condition - Spindle runs somewhat rough - Clamping towers and tool holders included - 2 additional clamping towers - 2 spare pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in work area - Central cooling unit for motor spindle and electrical cabinet - Operator panel at the set-up station - NC-controlled rotary table - Clamping hydraulics Machine can be inspected under power by arrangement.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, En Modula Lift ML 50D till salu. Det vertikala lyftmodulet har servats regelbundet av tillverkaren sedan installationen och är i mycket gott skick. Brickorna har en bredd på 4 100 mm och ett djup på 860 mm, vilket ger 3,53 m² lagringsyta per bricka. Med 50 brickor blir den totala lagringsytan 176,5 m². Varje bricka har en maxbelastning på 500 kg, vilket innebär en total kapacitet på 25 000 kg för alla 50 brickor. Det vertikala lyftmodulet är placerat i ett skyddat område med entresolplan, vilket har bidragit till att beklädnad och utvändigt skick är utmärkt. Specifikationer: Tillverkare: Modula Lhsdpfxov Uxrvs Apnjn Tillverkningsår: 2012 Modell: Modula Lift ML 50D Höjd: 6 200 mm Bredd (lyftmodul / bricka): 4 500 mm / 4 100 mm Djup (lyftmodul / bricka): 3 058 mm / 860 mm Antal brickor / Brickhöjd: ca 50 st / 120 mm hög kant Maxvikt per bricka: 500 kg Elektronik: 400 V, 20 A

Gamybos metai: 2015, būklė: paruoštas naudoti (naudotas), Parduodama CNC frezavimo staklė Spinner. Eigos intervalas X/Y/Z: 760mm/460mm/460mm, stalo matmenys X/Y: 900mm/410mm, didžiausias ruošinio svoris: 350kg, įrankių talpyklų skaičius: 24, didžiausias įrankio svoris: 8kg, didžiausias įrankio ilgis: 200mm, apsisukimai: 12 000 aps./min, didžiausias įrankio skersmuo: 80mm, įrankio laikiklis: SK40. Staklių matmenys X/Y/Z: apie 2600mm/1600mm/2850mm, svoris: apie 4000kg. Įskaitant automatiką ir M10 robotą. Dokumentacija yra. Galima apžiūra vietoje. Lsdoxwn I Uspfx Apnehn

Būklė: geras (naudotas), Atstumas tarp centrų: 1000 mm Centrų aukštis: 175 mm Ledotrgn Tspfx Apnehn CNC prekės ženklas: FANUC CNC modelis: Oi-TD

Būklė: naudotas, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE Lhedpouhaycsfx Apnsn - Max. bar diameter: 25.4 [mm] - Max. machining length: 200 [mm] - Spindle speed: 10,000 [rpm] - Minimum C-axis resolution: 0.1 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.1 [degrees] - Number of tool holders: 2 TOOL HOLDER 1 - Number of stations: 5 TOOL HOLDER 2 - Number of stations: 5 - Number of driven stations: 4 - Driven tool speed: 8,000 [rpm] SECONDARY MACHINING UNIT - Number of stations: 7 - Number of driven stations: 3 - Driven tool speed: 8,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power: 14 [kW] WEIGHT AND DIMENSIONS - Footprint: 2270 x 1650 [mm] - Machine height: 2200 [mm] - Machine weight: 3,500 [kg] MACHINE HOURS - Power-on hours: 46,571 [h] EQUIPMENT - Control: Fanuc - Driven tool motorization on: S2 - Driven guide bushing - Parts catcher - Parts ejector - Swarf conveyor: KNOLL - Coolant tank * with high-pressure pump: 100 [bar] - Bar feeder: TORNOS ROBOBAR SSF - Oil mist extraction: Elbaron - Fire extinguishing system * * NB: Functionality not guaranteed. To be checked by the buyer's qualified company.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000x1260x1950 mm TECHNICAL SPECIFICATIONS Ledow T Tcwepfx Apnohn 10-axis machine – standard 10 axes, 6 spindles: Axes and spindle designation - 1 sliding headstock: Z1, S1 - 2 independent vertical tool posts: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotary spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating axis for back-working: X4, S5 Bar feeder position: on operator's right Machine center height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. part length: - guide bush machining: 180 mm - collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous), 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous), 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotary Collet for guide bush, type: Meister 605 Number of side tool holders, combined - fixed: 2 x 5 - rotary: 3 + 3 Number of front tool holders, combined - fixed: 4 - rotary: 3 Number of rear tool holders, combined - fixed: 3 + 3 - rotary: 3+3 Tool section: 12x12 mm Standard rotary tool holder: ESX 20 Bar feeder: yes Parts catcher: yes All technical data subject to change without notice, errors and omissions excepted.

Gamybos metai: 1999, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition, equipped with a tool lift system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Tool holder in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by the machine body of the tool tray) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine dimensions (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Lhodpfsr A Hcbox Apnjn Power supply: 400 Volt, 50 Hz Connected load: 9 kW Equipment: • The machine has an electric control for the broaching stroke movement with both manual and automatic operation. • Integrated coolant/lubrication system • Tool lift system for flat broaching tools (no automatic feed) • The broaching slide with pull head holder is equipped with flat guides on both sides Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg) • Complete machine documentation, including CE declaration of conformity Remarks: The machine is ideal for manufacturing keyway slots. Thanks to its robust machine bed and the integrated tool lift system, it is especially well-suited for quick and easy use of flat broaching tools. The machine has had very limited use and is in near-new condition. The machine is available for inspection at our warehouse and can be demonstrated under power. Our direct contact details and further information about the machine can be found in the attached PDF document.

Būklė: geras (naudotas), Gamybos metai: 2018, Techninės detalės pateiktos paveikslėlyje. Ljdjzrniujpfx Apnehn Įranga yra geros būklės. Rankomis nurodytos dalys neįeina į komplektą.

Gamybos metai: 1998, būklė: paruoštas naudoti (naudotas), Base machine CTX 200E with driven tools, C-axis, and 1x sub-spindle machining. Includes DATAPILOT software package TurnPlus, cooling unit for control cabinet, hinge belt chip conveyor (discharge height: 1100 mm) including coolant tank, tool holder set for universal disc-type turret with tool holders for external machining, boring bar holders, tools with cylindrical shank mounting, sealing plugs, reduction sleeves. Full axial bar gripper, workpiece pick-up device, tool spindles: 3x axial (for drilling/milling/tapping), 1x radial (for drilling/milling/tapping), 1x for saw blades; complete collet chuck for main spindle, complete collet chuck for sub-spindle, 17x cylindrical collets DIN 173E, Ø 3-40 mm, 2x hexagon collets DIN 173E, sizes 7 mm and 12 mm AF, 2x square collets DIN 173E, size 8 mm AF. Bar feeder magazine IEMCA BOSS 542/32, guide channel set LW 13, additionally for IEMCA BOSS 542, 13x guide jaws for bar feeder magazine IEMCA BOSS 542/32, Ø 8-41 mm. Comes with full documentation. The machine has been idle for one year as the turret head is missing; no further defects known, operating hours unknown, no maintenance records. Supplied with bar feeder and various tooling. Lsdpfxsw Tl Ifj Apnjhn

Būklė: naudotas, Gamybos metai: 1998, veikimo valandos: 75 336 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: T62204, Įranga: dokumentacija / vadovas, TECHNISCHE DATEN - Anzahl der Achsen: 10 - Anzahl der Spindeln: 2 HAUPTSPINDEL - Max. Stangendurchmesser: 25,4 mm Lhjdpfx Apow Stndjnon - Max. Bearbeitungslänge: 200 mm - Spindeldrehzahl: 10.000 min⁻¹ (U/min) - C-Achsen-Teilungsgenauigkeit: 0,1° GEGENDSPINDEL - Max. Stangendurchmesser: 20 mm - Spindeldrehzahl: 10.000 min⁻¹ (U/min) - Spindelleistung: 3,7 kW - C-Achsen-Teilungsgenauigkeit: 0,1° - Anzahl Führungsbuchsenhalter: 2 FÜHRUNGSBUCHSENHALTER 1 - Anzahl der Stationen: 5 FÜHRUNGSBUCHSENHALTER 2 - Anzahl der Stationen: 5 - Anzahl angetriebener Stationen: 4 - Drehzahl der angetriebenen Werkzeuge: 8.000 min⁻¹ (U/min) FRONTANBAU - Anzahl der Stationen: 4 - Anzahl angetriebener Stationen: 4 - Drehzahl der angetriebenen Werkzeuge: 6.000 min⁻¹ (U/min) GEGENBEARBEITUNG - Anzahl der Stationen: 7 - Anzahl angetriebener Stationen: 3 - Drehzahl der angetriebenen Werkzeuge: 8.000 min⁻¹ (U/min) STROMVERSORGUNG - Versorgungsspannung: 400 V - Gesamtanschlussleistung: 14 kW GEWICHT & ABMESSUNGEN - Stellfläche der Maschine: 2270 x 1650 mm - Maschinenhöhe: 2200 mm - Maschinengewicht: 3.500 kg AUSSTATTUNG - CNC-Steuerung: Fanuc - Antrieb für rotierende Werkzeuge auf S2, S3, S5 vertikal/horizontal - Drehbare Führungsbuchse - Werkstückfänger - Werkstückauswurf - Kühlmitteltank - Stangenlader: ROBOBAR SSF