Stacionarus presas

Husmann St-SEL-TS-V

Sąlyga: geras (naudotas), Gamybos metai: 2007, galia: 5,5 kW (7,48 AG), įėjimo įtampa: 220 V, Husmann stationary compactor including hopper and pre-container Brand: Husmann Model: ST-SEL-TS-V Year of manufacture: 2007 Compactor weight: 5,150 kg Ndsdjwcdq Sjpfx Agwjd Motor: 5.5 kW Pre-container capacity: 32 m³ Discharge door: side-hinged

Gamybos metai: 1994, Sąlyga: paruoštas naudoti (naudotas), Engine power: 15.5 kW / 19.5 kW, pressing force: 320 kN, specific pressure: 425 kN/m², machine dimensions (L/W/H): approx. 5700 mm / 1900 mm / 1800 mm, weight: approx. 6000 kg. The machine is exhibiting a fault due to moisture and should be inspected. Nsdpfx Aoip D Rpjgwsdd

Sąlyga: nepatikrintas (naudotas), Hydraulic press for pressing paper and similar materials. The machine was fully operational prior to disassembly. Njdpfx Aeh Nyfyogwedd Press dimensions: Length: 4850 mm, width: 1370 mm, height: 3000 mm (reducible to 2300 mm). Weight approx. 3500 - 4000 kg. For further information, please contact: +48 539 660 495.

Gamybos metai: 2015, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Technical data of the feed bunker with hydraulic moving floor and bag opener: Manufacturer: BRT HARTNER GmbH Model: HP5-3035 Year of manufacture: 2015 Bunker volume: 30 m³ Drive power: 17.5 kW Dimensions (current state): 13,200 x 3,050 x 4,350 mm (L x W x H) Nodpfx Aju R Rtbjgwjdd Condition of the machine: The feed bunker with bag opener was previously used at a major recycling facility, where bagged waste was tipped into the bunker by wheel loaders. The bag opener was used to open the sacks and meter the waste for further processing. The system functioned perfectly up until disassembly and was replaced by a larger unit with higher throughput capacity. Remarks: The machine is currently undergoing refurbishment in our workshop. The photos show the unit during its current overhaul phase, therefore the system is not yet fully reassembled. Upon completion of the refurbishment, expected by February 2025, the machine will be test run under operational conditions without material input. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is complete. Inspection by appointment is possible. We accept no liability for technical data or possible errors.

Sąlyga: naujas, Gamybos metai: 2025, Variklio galia 7,5 kW - Pjovimo jėga 30 t Pjovimo kanalas pritaikytas - maks. rulono ilgis 1500 mm - maks. rulono diametras 1250 mm - Mašinos svoris apie 3800 kg - Rezervuaro talpa apie 110 litrų - Rankų apsauginė grotelė valdymo pulte ir priešingoje pusėje - Peilio užraktas - Tiesaus tipo skėlimo stalas - Dokumentacija 2 egz. vokiečių kalba (1x raštu, 1x USB) - Spalva RAL 5012 – šviesiai mėlyna Apsauginės grotelės/peilio sija RAL 1028 melioninė geltona Mašina sandėlyje – iš karto prieinama Kaina ir daugiau informacijos – pagal užklausą Ndodpfx Aeltmi Segwjd

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, veikimo valandos: 2 632 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 29.381, spaudimo jėga: 35 t, pildymo angos plotis: 620 mm, pildymo angos ilgis: 1 000 mm, bendras plotis: 2 380 mm, bendras aukštis: 2 500 mm, bendras ilgis: 6 625 mm, Įskaitant padavimo juostą. Mašina iš karto paruošta darbui. Ndjdpfx Agevaw T Aewsd

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Balemaster Year: 2006 Model: CMG 268 Nsdpfxjrdwlko Agwsdd Waste baler

Sąlyga: naudotas, Bendras aukštis 6500 mm, pagrindo plotas 2000 x 2000 mm, lauko montavimas, kompaktiškų filtrų serija, modelis PKFP – 1 elementas – 1,92 x 1,92, kratomasis filtras, darbas esant viršslėgiui, filtro maišo ilgis 2500 mm – 180 mm skersmuo – bendra filtro plotas 105 m². 2 neapdoroto oro ventiliatoriai – 2 ortakiai (skersmuo 300 mm). 1 x ventiliatorius KT 300, 15 kW galia, našumas 6361 m³/h, pagamintas 1999 m. 1 x ventiliatorius S 25 / 300, 7,5 kW galia, našumas 7400 m³/h, pagamintas 1993 m. 1 x transportavimo ventiliatorius, 6,1 kW, našumas 57 m³/min, pagamintas 1996 m. Bendra apytiksliai 14.000 m³/h tūrio srautas. Briketavimo presas Höcker Polytechnik, tipas BrikStar C 3 - 12 . 1225, variklis 3,0 kW, briketo skersmuo 65 mm apvalus, pajėgumas apie 40-45 kg/h priklausomai nuo medžiagos specifinio svorio. Sandėlio vieta: Nattheim. Ndjdpfxovviyte Agwjd

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Technical Data for EPS (Styrofoam) Compactor: Manufacturer: FZ-Recycling GmbH & Co. KG, Germany Model: FZR 320 Year of manufacture: 12/2022 Shredder drive power: 4 kW Compactor screw drive power: 7.5 kW Hydraulic unit drive power for holding clamp in compression channel: 1.1 kW Total connected load: 12.6 kW Current consumption: 32 A Compression ratio of compacted blocks to original material: approx. 50:1 (material dependent) Block weight after compaction: approx. 300kg/m³ (material dependent) Block dimensions: 320 x 320 mm, length variable Throughput performance: approx. 100 kg/hour, depending on material Achievable density: approx. 250 – 300 kg/m³ The compacted blocks are stacked to approx. 1,400 mm height on pallets and wrapped in stretch film. Machine dimensions: approx. 4,600 x 1,400 x 1,980 mm (L x W x H) Transport weight (compactor): 1,325 kg Nedpsu Thkajfx Agwjdd Condition of the Compactor: The compactor was only used sporadically, is in very good condition, and is immediately available. Owing to its low weight and the forklift shoes in the transport frame, the machine is mobile and can be used directly at the point of material collection, e.g., on construction sites. Electrical connection is via a CEE 32 A plug. Scope of Supply: 1 unit EPS compactor, ready for connection and operation Remarks: The complete documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is available. Inspection by appointment possible. We accept no liability for technical details or possible errors.

Sąlyga: naudotas, Gamybos metai: 1994, veikimo valandos: 62 058 h, Funkcionalumas: ribota funkcionalumas, mašinos/transporto priemonės numeris: 099314, ryšulio plotis: 770 mm, ryšulio aukštis: 520 mm, Manufacturer: COMDEC - PAAL Model: LV2020PFT Serial number: 099314 Year of manufacture: 1994 Maximum throughput: 25,000 kg/h Bale discharge dimensions: 77 cm x 52 cm Nsdpfxot Ucqfs Agwedd The baler is operational – it was in use until the production line was shut down. Recently, there was an issue with the automatic tying system.