Šlifavimo stalas

Hurrican Easy FA 1000

Būklė: naujas, Gamybos metai: 2025, Manual operation featuring our ultrasonic cleaning technology, analog control panel, and temperature regulation via digital thermostat. PRO-series features can be added as options. We offer capacities ranging from 60 to 7,500 L to meet all requirements. Csdpfx Aajf Hqavshopw Tank capacity: 110L External dimensions: 1970x670x970mm Usable rack dimensions: 550x350x250mm Ultrasonic frequency: 40kHz Ultrasonic power: 1000W

Gamybos metai: 2026, būklė: naujas, The AL-KO Sanding Table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table product range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested in Accordance with BGI 739-1” seal. This makes it suitable for hand sanding tasks as well as for processing workpieces using handheld machines. The sanding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to its funnel-shaped design with an integrated air duct, the airflow is precisely guided towards the extraction port. Depending on the required extraction performance, the unit can be connected to the on-site extraction system via a Ø 140 mm or Ø 160 mm connection port. The folded edges along both sides of the work surface allow for face-end working on workpieces. The extraction grates are aerodynamically aligned with the extraction port to ensure optimal extraction results. For cleaning inside the sanding table, the slatted grid can be removed and the air duct can be detached by loosening just a few screws. The sanding table is delivered pre-assembled; only the legs need to be installed and adjusted to the required working height. Your advantages: • Accessible from all four sides Cpjdpfx Ajfyadbjahsw • Loadable up to 150 kg • Manual, tool-free height adjustment with scale • Offset side edges for edge sanding • Workpiece-friendly beech slatted grid (removable) • Funnel-shaped air guidance to the extraction port Technical data: • Extraction port: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at port at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working surface (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Gamybos metai: 2022, būklė: beveik kaip naujas (parodų įrenginys), AL-KO Grinding Table AST 1.5 BASIC The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the seal “Wood Dust Tested according to BGI 739-1”. YOUR BENEFITS - Accessible from 4 sides - Load capacity up to 150 kg - Manual, tool-free height adjustment with scale - Offset longitudinal sides for edge sanding - Workpiece-friendly beech wood grate (removable) - Funnel-shaped airflow to extraction nozzle TECHNICAL DATA AST 1.5 BASIC Cpsdpfjdqzhbsx Aahow Extraction nozzle: 140 / 160 mm Required extraction capacity: 1,500 m³/h Negative pressure at nozzle at 22 m/s: - 1,000 Pa at DN140 mm - 700 Pa at DN160 mm Adjustable working height: 735-1,015 mm Work surface (W x L): 946 x 1,500 mm Dimensions (W x L): 1,000 x 1,600 mm Weight: approx. 73 kg

Būklė: naujas, Table height: 650 - 1050 mm Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1950 mm Weight approx.: 365 kg This enables the user to flexibly adjust the working surface height to individual requirements, improving both efficiency and ergonomics. Height adjustment is provided as standard by a manual hydraulic system within a range of 650 – 1050 mm (other ranges available upon request). The work surface is equipped—just like the SST fix series—with a 100 x 100 mm, Ø 28 mm hole grid. When used in combination with machining equipment, inspection or post-processing devices (deburring, marking, checking) can be adjusted to match the clamping table height of the machine. The table systems are easily relocated using a pallet truck. These mobile systems, with their various mounting and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. After removal from the machine, tools can be safely maintained on site and, if necessary, sent for repair. Thanks to the fully bolted construction of the clamping plate, the work surface can be replaced cost-effectively in the event of wear. The table below (Table 2) provides an overview of the available standard models. Cpedpfx Aaofk Aivehow Price must be reconfirmed with the manufacturer before ordering!

Būklė: naujas, Gamybos metai: 2024, keliamoji galia: 1 500 kg, Special offer: €2,000 discount Perforated table 1200 x 2400 x 200 mm Tabletop thickness: 20 mm, Bore diameter: 28 mm Swivel range: 360° Height adjustment: Hydraulic, Motorised 800 to 1200 mm Rotation speed: 0.5 rpm Motor power: 0.75 kW We offer tables in various sizes and load capacities: Load capacity 500 kg, Dimensions 1000 x 1500 x 200 mm, Ø28 mm boreholes, height adjustment manual or automatic Cpjdpfsuua Insx Aahjw Load capacity 1,000 kg, Dimensions 1000 x 2000 x 200 mm, Ø28 mm boreholes, height adjustment manual or automatic Load capacity 1,500 kg, Dimensions 1200 x 2400 x 200 mm, Ø28 mm boreholes, height adjustment manual or automatic Load capacity 2,000 kg, Dimensions 1200 x 2400 x 200 mm, Ø28 mm boreholes, height adjustment manual or automatic Load capacity 3,000 kg, Dimensions 1200 x 2400 x 200 mm, Ø28 mm boreholes, height adjustment manual or automatic Load capacity 5,000 kg, Dimensions 1500 x 3000 x 200 mm, Ø28 mm boreholes, height adjustment manual or automatic

Būklė: naujas, Table height: 800 mm Dimensions (LxWxH): 1950 x 950 x 800 mm Table width: 950 mm Table length: 1950 mm Cpjdpfegrvwfjx Aahjw Approx. weight: 288 kg Special workbench systems from the SST, SFT, and SWT fix series serve as 3D clamping stations for the efficient production of assembly, welding, and bonding structures, such as fixtures, railings, frames, etc. With the help of the extensive range of clamping accessories (see catalogue section Welding Table Accessories), these table systems can also be used as flexible retoolable fixtures, enabling high-quality production of small and medium series. The special workbenches feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop equipped with a Ø28 mm hole grid. Additionally, the tabletop has a 100 x 100 mm grid marking for easy alignment of workpieces and fixtures. The hole grid allows for the use of a wide variety of clamping elements and positioning aids. For specific applications, the standard tabletop can also be optionally equipped with stainless steel 1.4301, aluminium, plastic, or high-strength ST70 materials. Thanks to the fully bolted construction of the clamping plate, the work surface can be cost-effectively replaced if worn. This makes the table system particularly sustainable for long-term use. Price must be reconfirmed with the manufacturer prior to ordering!! For accessories and further information, please follow this link:

Gamybos metai: 2020, būklė: naujas, Ultrasonic cleaning baths for washing, phosphating, chromating, degreasing, and removing paint coatings. Cedpfefzk Ewsx Aahepw Materials ROMER ultrasonic cleaning systems are constructed using stainless steel, providing protection against acids. The tanks feature additional insulation walls to prevent heat loss and ensure faster heating. High-quality materials guarantee a long service life of the vibrating components. Heating System The ROMER bath heaters are made of premium materials and high-temperature resistant ceramic elements. The heating system delivers high thermal efficiency, with hot water automatically mixing with cold water to heat the entire tank evenly. Ultrasonic Transducers The ultrasonic elements used in ROMER cleaning machines are installed in submersible modules, which better reflect the vibrations and are replaceable. The ultrasonic frequency range is 20–40 kHz depending on the component being washed. Lower frequencies are used for large, high-strength parts, while higher frequencies suit jewelry, delicate mechanical systems, and similar applications. All transducers are connected using high-temperature resistant cables.

Būklė: naujas, Quantity: 10 units Cedpovn U Hcofx Aahjpw Weight: 30 kg Condition: new Hole diameter: 28 mm 10 pieces screw clamps Throat depth: 120 mm Length: 300 mm Condition: new Hole diameter: 28 mm

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2018, veikimo valandos: 7 583 h, valdymo tipas: CNC valdymas, valdiklių gamintojas: Bosch-Rexroth, valdiklio modelis: Rexroth IndraMotion MTX, lazeri tipas: diodinis lazeris, lazdo šaltinio gamintojas: TRUMPF, lazerio šaltinio modelis: TruDisk 3000, lazero valandos: 7 583 h, lazerio galia: 3 000 W, perforavimo jėga: 16 t, punchingo skersmuo: 76 mm, plieno lakšto storis (maks.): 6 mm, X ašies eiga: 2 500 mm, Y ašies eiga: 1 250 mm, X ašies padavimo greitis: 80 m/min, Y ašies padavimo greitis: 60 m/min, bendras svoris: 13 200 kg, Įranga: CE žymėjimas, apsaugos šviesos užtvara, aušinimo blokas, avarinis stabdymas, dulkių šalinimas, Extended station equipment - Multitool function - MultiBend function - Thread forming function with thread counter Thread former breakage control Lubricant level monitoring - Marking/fast beading function - Engraving function - Deburring and rolling technology function Extended machine equipment - 1x additional hydraulic clamp Data transmission - Wireless Operation Point - Mobile app control Standard equipment: Machine - Enclosed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamps and tools - Hydraulic clamps (3 units) - Maintenance-free three-phase drive motors - Reseating device with programmable hold-down - Foot switch for clamp closing - Protective enclosure with direct access - Part chute to the right - Part flap to the left - Sensor for part flap - Work area lighting - FocusLine - Retrofit capability for SortMaster Compact - Protective tooling - Transport and installation device TRUMPF laser - LLK according to standard layout (10 m) - Laser power control - Logbook function for laser - Enclosed beam guidance via laser light cable (LLK) Cpjdpfxsyic Sds Aahsw - Separate power supply for TruDisk Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punching head - Delta Drive - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Spray lubrication for punch - Slug extraction for punching - Forming function - Punch stroke counter Control - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Remote support interface - Automatic shut-off with wake-up function - Program management - Production plan Data transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking - Dual-beam safety light curtain Extended standard equipment - TruDisk 3001 solid-state laser with 1 LLK outlet - Cooling unit (water - air) - Compact extraction system - 1st stop pin (inside right) - Ball tables - Good part container for part chute - Chip container for rear extraction

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, Extraction table without rear/side walls Technical data: Working surface: 2,000 x 1,000 mm Working height: 850–950 mm (manual adjustment) Width: 2,250 mm (including energy strip) Energy strip with tool tray: 2x 230 V sockets with hinged cover, 2x compressed air couplings, power cable and main switch Extraction nozzle Ø 160 mm, with rim Csdpfxouzf Ihe Aahepw