Surinkimo stalas

Huellinghorst SYSTEMOplan

Būklė: naujas, Gamybos metai: 2024, mašinos/transporto priemonės numeris: 302340, Ring bending machine Manufacturer: KB Turkey Model: MB 30 Lower shaft: 30 mm Upper shaft: 30 mm 2 driven rollers With base frame for horizontal and vertical operation Cgodpfsd S Uf Ssx Ab Tou Bending capacity: Round tube up to 48 x 3.0 mm Flat bar (upright) 50 x 10 mm Square tube 40 x 40 x 3 mm Weight: 170 kg Motor: 0.75 kW, 400 Volt, 50 Hz, 3 phase.

Gamybos metai: 1977, būklė: visiškai atnaujintas (naudotas), I am selling a Rapid DGS double mitre saw, year 1977. Swivelling heads. Drilling heads on each side at the front included. In very good condition. Available immediately. Codpfsd N Rb Dox Ab Tsgu

Būklė: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments Codpfx Aboqt Dmyj Tjgu - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Būklė: naujas, Gamybos metai: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Spindle: Non-removable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Colour: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Solid German engineering Spindle moulder with single-sided tilting, fixed spindle for a swiveling range from -5° to +45.5° Electronic positioning control for height and tilt adjustment, with zero point reset for height and offset positioning Electronic displays for position and spindle speed 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push buttons for spindle start and stop Forward and reverse rotation Quick clamping system for cutters Finely planed grey cast iron table with fixed frame support Control panel mounted below the fixed frame support Fence 216, total adjustment via handwheel and LCD display, including cast iron fence plates and aluminium chip guards Machine socket Cjdpfx Ajfpb Nmob Togu Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Spindle diameter 30 mm, non-removable CE compliant GS tested

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, veikimo valandos: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor with reduced knife projection, suitable for hard and soft materials + 22 kW motor + Effective square knives *For pallets: up to a maximum of 10 pallets per hour *Screen and material dependent. Significantly higher throughput for smaller wood residues. Motor: 22 kW; 400 V - 50 Hz - 3 ph, Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: machine color may vary Weight: 1920 kg Standard equipment included: - Control cabinet with PLC control - Automatic star/delta start - Fast hydraulic system - Automatic shut-off when rotor runs idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra charge: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overbelt magnet + €6,980 net Cjdpfx Absx Af Rds Tsgu - Control for conveyor belt and overbelt magnet + €2,750 net (Start and stop in sync with the shredder) - Enlarged hopper 1500x1500 mm + €3,480 net Requirements for input material: - Moisture content (atro) must be below 25% - Material must be free of metals and mineral contamination. Damage to the tools and/or increased wear may result.

Būklė: naudotas, Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ✅Scope of delivery ►1 unit – Gas-heated large powder curing oven ►1 unit – Automatic powder coating booth ►1 unit – Electrically heated small powder curing oven ►2 units – Room-type mono-cyclone manual powder coating booths ►6 units – Automatic powder coating guns ►3 units – Manual powder coating guns ►1 unit – Automatic powder recovery system ►6 units – Mono-cyclone où1 unit – Automatic control panel ►1 unit – Automatic bar movement system with speed control ►2 units – Mobile platform with speed control ►8 units – Parking station Csdpfxoiivq Ue Ab Tjgu ►300 m – Conveyor rail (1,000 kg capacity) ►12 units – Hanging rods Our facility is located at Anhaltstr 30, 14943 Luckenwalde. You are welcome to make an appointment to view the machinery. The system has been in operation for 10 years. As we are the direct manufacturer of the system, we can carry out any modifications to the machinery you require by mutual agreement. Does the system not fit your existing installation site? We can adjust the layout to suit your needs. Please check the system PDF file via the link below.

Būklė: naujas, Measuring lengths: up to 5700 mm Tube length: 6000 mm Number of holders: 7 Material: stainless steel tube Dimensions (L x W x H): 6.0 x 0.3 x 0.2 m Cgjdpfx Abjfv Atls Tou The length measuring system is available as a retrofit for existing roller conveyors, in lengths from 2 to 6 meters. The guide rail is made of rectangular tube 60 x 30 x 3 mm. The steel measuring tape is self-adhesive. The magnifier with 6x magnification facilitates precise adjustment to the desired length. Attention: This listing is only for the stop system, without roller conveyor!

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED LOADING STATION Cgjdefi Tg Hspfx Ab Tou Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (with sliding carriage) No. 1 motorized carriage with horizontal metal arms External roller conveyor (at floor level) for feeding the stack of panels to the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fence with safety mats Operating capacity (cycles / min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Būklė: naudotas, Medžiagos plotis 300 mm Ritės svoris 3 t Medžiagos storis 2 - 4 mm Tiesinimo staklės, 7 volai, gam. Schleicher, tipas RM 6-95/160 Juostos plotis: 300 mm Juostos storis: 2 - 4 mm Tiesinimo skerspjūvis: 1200 mm² Įtampa: 220/380 V 50 Hz Galia: 3,1 kW Ritės laikiklis su prispaudimo voleliu, gam. Schleicher, tipas H-3 Maks. apkrova: 3 t Juostos plotis: 400 mm Įtampa: 220/380 V 50 Hz Cgodpscdrmmefx Ab Tju Galia: 3,92 kW be valdymo

Būklė: labai geros būklės (naudotas), rida: 252 000 km, pirmoji registracija: 07/2015, kuro tipas: dyzelinas, ašių konfigūracija: 8x2, kuras: dyzelinas, stabdžiai: variklio stabdymas, spalva: raudona, vairuotojo kabina: miegamoji kabina, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: oras, krovimo vietos ilgis: 6 100 mm, Gamybos metai: 2015, veikimo valandos: 2 708 h, Įranga: ABS, autonominis šildytuvas, centrinis užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, kranas, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, priekabos jungtis,