VIENPUSĖS KRAŠTŲ APKLIJAVIMO MAŠINOS - 1 PARTIJA

HOMAG TBR 100 + KAR 350 + TFU 200

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments Itsdsqt Dmyopfx Af Iob - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Sąlyga: visiškai atnaujintas (naudotas), AUTOMATIC COMPLETE DRILLING LINE, max. working width 3200 mm, equipped with fast automatic handling system. Comprising the following machines: A) LOADING STATION “RBO” Winner C 3200 with dual pick-up and central motorized roller table. Includes 2 floor-mounted motorized roller tracks for panel stack infeed to the loader. B) ROLLER CONVEYOR (connecting roller table with 90° transfer belts) “RBO” Transfer TA 90° C) 1st AUTOMATIC DRILLING MACHINE “BIESSE” Model Techno FDT Itjdpfx Aedfgg Isf Ijb with 2 horizontal drilling units + 7 lower vertical drilling units D) 2nd AUTOMATIC DRILLING MACHINE “BIESSE” Model Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units E) ROLLER CONVEYOR (connecting roller table with 90° transfer belts) “RBO” Transfer TA 90° G) UNLOADING STATION “RBO” Winner SC 3200 with dual pick-up, double stacking station, and central motorized roller table. Includes 2 floor-mounted motorized roller tracks for outfeed of panel stacks from the unloader.

Sąlyga: naudotas, Gamybos metai: 2014, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chances of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs.✳️ ✨✨Buy directly from the manufacturer and benefit from price and quality advantages!✨✨ Take advantage of Proton’s 40 years of expertise in surface coating technologies. ➖➖➖➖➖ ✅System Components ►1 pc Gas-heated large powder curing oven ►1 pc Automatic powder coating booth ►1 pc Electrically heated small powder curing oven ►1 pc Manual mono-cyclone powder coating booth ►1 pc Room-type manual mono-cyclone powder coating booth ►1 pc Automatic chemical pre-treatment and drying system ►6 pcs Automatic powder coating gun ►3 pcs Manual powder coating gun ►1 pc Automatic powder recovery unit ►5 pcs Mono-cyclone ►1 pc Automatic control panel ►1 pc Automatic bar movement system, speed controlled ►2 pcs Mobile platform, speed controlled ►12 pcs Parking station Isdpfx Afoiivq Us Ietb ►300 m Conveyor rail ►12 pcs Suspension bars Our facility is located at Anhaltstr 30, 14943 Luckenwalde. You are welcome to schedule a viewing appointment. The plant has been in operation for 8 years. As the direct manufacturer, we can carry out any machine modifications you require by mutual agreement. Does the system not fit into your existing installation area? We can adapt the layout accordingly. Please check the system’s PDF documentation via the link below.

Gamybos metai: 1999, Sąlyga: geras (naudotas), Biesse Polymac ERGHO 5 Edge Banding Machine, Year of Manufacture: 1999 Biesse Italy S/N 80709 Maximum panel thickness: 10–45 mm Minimum and maximum edge band thickness: 13–60 mm Maximum edge banding material thickness (in rolls): 0.4–3 mm Minimum panel width: 50 mm Minimum panel length: 150 mm Feed speed (m/min): 10/20 Technical specifications: Itsdpfjgtx Aqox Af Iob • Glue pot VC 700 • End trimming unit 701 • Edge trimming unit RS 700 • Corner rounding unit CR 200 • Tilting edge trimming & chamfering unit RI 700 • Compact scraper blade RBK501 • Buffing unit SP700 • Edge sanding unit LV 700 Additional features: • Heated infeed guide • PLC control • Panel support guide • Large diameter roll holder • Edge trimming device for 3 mm thick roll edges 400 V, 50 Hz CE marked Machine dimensions (L x W x H): 4950 mm x 1700 mm x 1530 mm Weight: 2,900 kg

Sąlyga: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, Fully automatic electronic control with program selector switch WASHING-GLUING-GLUING/DRIVING Isdpfxjv Aubpe Af Istb - Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of the dowel feed rate - Closed glue system with 6 bar glue pressure via glue nozzle - Selector switch GLUE/WATER for flushing/cleaning the glue system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and dirty water collection container) - 1 stainless steel container for 7.5 kg glue, as well as 1 stainless steel container for 7.5 l water for flushing/cleaning incl. 1 gun for dowels Ø 8 mm Dowel length 25 - 40 mm Gluing / dowel driving tool fully overhauled and not used since

Sąlyga: dilaminuotas dirbtuvėje (naudotas), DOUBLE-SIDED SQUARING AND EDGE BANDING MACHINE – 1st machine in line Edge thickness in rolls (min/max): 0.3 / 3 mm Panel thickness (min/max): 8 / 45 mm Itsdpfx Asdh Tfgef Iob Working width (min/max): 236 / 1300 mm Control/Software: ICOS Open Feed speed (adjustable): 10 / 50 m/min No transmission bar (Master & Slave systems) Safety and noise protection cabin SQUARING SECTION (per side): Spray unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free position EDGE BANDING SECTION (per side): Gluing unit (Hot Melt + premelter) 04.1570 Pressure zone for edging Edgeband magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flush trimming unit 08.517 Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free position

Sąlyga: geras (naudotas), Weiss Model: SC/KWT 450 Salt Spray Chamber Technical Data: Test chamber volume: 450 liters Maximum load: 100 kg Brine reservoir: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber internal dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Fields of application: Corrosion testing: Itjdpfeudvg Rsx Af Ieb Salt spray test: Ambient temperature up to +50°C Condensation water test: Ambient temperature up to +45°C Humidifier: +75°C Temperature constancy: Temporal temperature deviation: ±K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Standard climate (ventilation): DIN 50014 Weight: 180 kg Condition: used Scope of delivery: (See picture) (Subject to modifications and errors in technical data. All details without guarantee!) For further questions, please do not hesitate to contact us by phone.

Sąlyga: geras (naudotas), Gamybos metai: 2011, mašinos/transporto priemonės numeris: 2212.287, Automatinė plokščių pjovimo staklė Schelling Tipas: FH 6 430 Staklių nr.: 221.287 Metai: 2011 Automatinė plokščių pjovimo staklė Schelling su automatiniu užpakaliniu padavimu ir pakeliamu stalu. Skirta pjauti plokštines medžiagas: medžio drožlių plokštę, MDF, fanerą, OSB, laminuotą plokštę ir kt. Iedpfxetk It So Af Istb Techninė informacija: - Programinė įranga: MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC - Operacinė sistema: WINDOWS XP - Kompiuteris su klaviatūra ir pele - TFT monitorius 17" - Pjovimo ilgis 4300 mm, automatinis plokštės pradžios nustatymas - Pjovimo plotis 4300 mm - Pjovimo ilgio tikslumas 3 m ±0,1 mm - Pozicionavimo tikslumas (įvade) ±0,1 mm - Maksimalus diskinio pjūklo skersmuo 460 mm, velenas 30 mm - Prepjovimo pjūklas 200 mm, velenas 20 mm, motoro valdymas nuo valdymo pulto - Maksimalus plokštės storis 120 mm - Plokščių krovos sulyginimo įrenginys - Pagrindinio pjūklo variklis 27 kW - Pjūklo iškilimas virš stalo 135 mm - Apsauginė užuolaida - Oro pagalvės stalas su 3 oro kamuoliukų antgaliais, radialinis ventiliatorius - Stalo išmatavimai: 2650 x 850 mm 620 x 850 mm 2650 x 2550 mm - Prispaudimo sija su automatiniu prispaudimo stiprio reguliavimu, priklausomai nuo paketo ilgio ir aukščio - Paketo ištiesintuvas prieš ir po prispaudimo sijos - Maksimalus paketo aukštis 120 mm (įskaitant lenkimo ir storio toleranciją) - Stūmiklis su 12 griebtuvų - Maksimalus griebtuvo atsidarymas 133 mm - Min./maks. paketo ištiesinimo jėga 400/2000 N - Pjūklo vežimo greitis pirmyn 6-150 m/min - Grįžtamasis vežimo greitis 150 m/min - Stūmiklio judėjimo greitis pirmyn iki 25 m/min (pagal EC Europa EN1870-13), kitose šalyse iki 80 m/min - Grįžtamoji eiga iki 80 m/min - Išstūmimo įrenginys 3 vnt. - Pakeliamo stalo ilgis x plotis 4350 x 2550 mm - Hidraulinis mazgas - Standartinis pakėlimo aukštis 1600 mm - Kėlimo greitis 1,25/2,5 m/min, nuleidimo 1,25/5 m/min - Maksimali apkrova 1200 kg/m², bendra 9 t - Volelių linija su dažnio valdymu krovos judėjimui ant pakeliamo stalo: 4100 x 2600 mm - Maksimalus krovos svoris 6500 kg - Maksimalus krovos ilgis 1060 mm - Šakinių krautuvų angos 4 vnt., tarpas per vidurį 1200 mm, angos plotis 300 mm - Šviesos užuolaida saugai - Volelių konvejeris (įvažiavimas į kairę ir dešinę, su dažnio valdymu): 5600 x 2600 mm, maks. apkrova 6500 kg - Šakinio krautuvo angos: 2 vnt., tarpas 900 mm, angos plotis 400 mm - 2 pozicionavimo atramos su voleliais krovos sulyginimui - Dviguba šviesos užuolaida personalo apsaugai - Volelių stalas už pjūklo, pjovimo gylis 4300 mm, laisvai riedantys poliamidiniai voleliai - Kampinė atrama ant volelių stalo - Dviejų takų įvadas (sijos ilgis 7200 mm), dvišalės grūdintos precizinės kryptinės - Krumpliastiebinė pavara abipusė - Įvado vežimo (stūmiklio) pavaros krumpliastiebė, servovariklis, bekontaktė matavimo sistema - Griebtuvai (žirkliniai) stūmiklyje 12 vnt. - Automatinis griebimo jėgos reguliavimas pagal paketo aukštį (progresyvi griebimo jėga), galima nustatyti iki 0 - Stūmiklis plokštėms, kurių storis didesnis nei 6 mm – plonesnė medžiaga maitinama rankiniu būdu - Centrinė tiektuvo (stūmiklio) valymo sistema - Suslėgtas oras 6-8 bar, apie 1600 l/min - Galia 38 kW, 70 A, 3x400 V, 50 Hz, darbinė įtampa 24 VDC - Dulkių ištraukimas 4000 m³/h, oro greitis 30 m/s - Jungčių diametrai: 80 mm (kampinė jungtis), 120 mm (prispaudimo sija), 150 mm (pjūklo dulkių kanalas) - Bendras užstatymo plotas be varomų volelių konvejerių ir apsauginės grotelės – apie 11 650 x 7 300 mm - Varomų volelių takai k

Sąlyga: labai geros būklės (naudotas), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control: NC 21 / HOMATIC Feed speed (variable) m/min: 15 - 50 Safety and noise protection cabin Cam pitch (mm): 500 FORMATTING UNIT (for each side): Spray unit (for liquid anti-adhesive) Protection milling cutter (pre-milling) 1 x kW 4.5 Chipper KD 11 (2 x kW 6.6) LEFT SIDE: Universal milling unit (electropneumatically controlled) SF 20 (kW 6.6 x 1) 0°-90° RIGHT SIDE: Free space Itsdpfx Ashvi E Ief Ijb EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) A3 + A34 Edge magazine for rolls (compartment No. 6). Edge pressure zone "A" (1 + 4 rollers) End trimming unit HL 04 (2 x kW 0.18) Pre-milling unit OPTIMAT (2 x kW 0.55) Multifunctional unit (radius and contour milling unit) FK 11 - 2 x kW 0.4 Multi-profile scraper unit PN 20 Flat scraper unit (pneumatic) Buffing unit (2 x kW 0.25)

Sąlyga: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 - in solid strip mm max 1 Panel thickness (min/max) mm 14 / 60 (LASER - Max 50) Control ICOS Open Feed speed m/min (adjustable) 6 - 30 Top pressure driven by V-belt Spray unit (for liquid release agent) Adjustable stop ruler CNC controlled Panel infeed system Jointing milling unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR glue + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spray unit (for separating agent) Pressure zone + edge magazine for rolls (compartments no.) 36 + 12 End trimming unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0° - 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 30 (0.5 kW x 1) max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing liquid) Buffing unit 08.614 (0.25 kW x 4) Itedpfsi Hn Srex Af Ieb Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)