DVIPUSĖ KRAŠTŲ JUOSTA

HOMAG KFL 526 / 10 / A3 / L / 25

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (with sliding carriage) No. 1 motorized carriage with horizontal metal arms External roller conveyor (at floor level) for feeding the stack of panels to the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fence with safety mats Operating capacity (cycles / min) approx. 16 Lrodefi Tg Hepfx Alrjp Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Gamybos metai: 2017, būklė: paruoštas naudoti (naudotas), A spinning, drawing, and winding line for the production of monofilament yarns, multifilament FDY, and POY is available. Spinning positions: 24, yarn ends: 192, drawing: cold and hot godets, doffing: without yarn breakage, quantity of godets heated/cold: 50/50, number of winders: 24 (+2 reserve winders). Includes various spare parts for both the machine and electronics. Documentation is available. On-site inspection is possible. Lrjdpfx Aouanq Tslrjp

Gamybos metai: 2001, būklė: beveik kaip naujas (naudotas), Double-belt sander, two lower sanding heads, each with a main motor of 2 x 7.5 kW, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished. The conveyor belt is in very good condition. The graphite shoe is new. The machine features two lower units: the first is a rubber contact roller, and the second is a combination unit with a graphite shoe. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation system. Pneumatic belt tensioning. Sanding belt speed is 18 m/s. Conveyor belt feed speed is 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Rated total power: 21 kW. Maximum workpiece height: 160 mm. The machine is equipped with two lower working rollers. The conveyor belt operates from above. Lrodpefxpbmofx Alrop

Būklė: naudotas, mašinos/transporto priemonės numeris: 007135, Didžiausias plokštės plotis: 800 mm Didžiausias plokštės ilgis: 2500 mm Grąžinimo įrenginys briaunavimo staklėms: kairėje pusėje Lsdpfxjt Hmppo Alrsrp

Būklė: naujas, Dedikuota mašina, skirta tiesios griovelio / išpjovos įvairoje medienos gaminių, naudojamų baldų gamyboje, bendrosiose staliaus dirbtuvėse, sodo baldų, sandėliukų, gegnių ir karkasinių konstrukcijų gamyboje, įpjovimui. Taip pat gali būti naudojama durų rėmų gamybai, gegnių atramų įpjovimui ir rąstinių namų gamyboje. Standartiškai įrengta horizontaliomis pneumo spaustuvėmis ruošiniams bei hidrochekinio amortizatoriaus valdymu, kuris užtikrina tolygų frezos eigos judėjimą. Tikslus rutulinių guolių judėjimas grūdinto plieno kreiptuvais. Tvirta lieto ketaus konstrukcija su plieniniu pagrindu. 3 kW variklis. Didžiausias įrankio skersmuo 250 mm. Įrankio vidinis skylės diametras 40 mm. Frezos variklio rankenėlės aukščio reguliavimas. Didžiausias išpjovos / griovelio gylis – 60 mm. Griovelio / išpjovos plotis – 60 mm per vieną pravažiavimą. Maksimalus įrankio eigos ilgis – 250 mm. Ledpfxsdy Hm De Alrjrp 2 horizontalūs ruošinio spaustuvai. Hidrochekinis skersinio pjovimo svirties amortizatorius. Dulkių nutraukimo jungtis – 100 mm. Mašinos stovas.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: W230-028, spaudimo jėga: 80 t, garantijos trukmė: 24 mėnesiai, slėgis: 250 juosta, galia: 45 kW (61,18 AG), paskutinio kapitalinio remonto metai: 2024, Įranga: dokumentacija / vadovas, This fully refurbished baler is being sold by Bollegraaf Recycling Solutions. It concerns a HBC80 baler (45 kW) with vertical tying. This baler has already been completely overhauled in our refurbishment workshop. Ljdetvat Tepfx Alrerp The refurbishment is carried out according to the very strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold including 2 years warranty. This press is supplied with the following options: * Mounting frames * Intermediate hopper * Bale outlet * Wire spool platforms

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 155423, bendras svoris: 4 707 kg, kuro tipas: dyzelinas, bakelio talpa: 597 l, spalva: raudona, galia: 400 kW (543,85 AG), išėjimo įtampa: 400 V, išėjimo dažnis: 50 Hz, išėjimo srovės tipas: trifazis, nominali galia: 400 kW (543,85 AG), nominali (akivaizdi) galia: 538 kVA, nuolatinė galia: 400 kW (543,85 AG), nepertraukiama (akivaizdi) galia: 538 kVA, bendras ilgis: 4 100 mm, bendras plotis: 1 600 mm, bendras aukštis: 2 200 mm, sukimosi greitis (maks.): 1 500 aps./min, variklių gamintojas: FPT/Iveco, aušinimo tipas: vanduo, kombinuota degalų sąnauda: 100,6 l/100 km, kuro sąnaudos (mieste): 51,5 l/100 km, kuro sąnaudos (užmiestyje): 70,63 l/100 km, kuras: dyzelinas, kuro bako talpa: 597 l, baterijos talpa: 100 Ah, akumuliatoriaus įtampa: 12 V, įėjimo įtampa: 12 V, įėjimo dažnis: 50 Hz, įėjimo srovė: 32 A, darbinė temperatūra: 25 °C, aplinkos temperatūra (min.): −25 °C, aplinkos temperatūra (maks.): 45 °C, valdymo spintos aukštis: 2 200 mm, valdymo spintos ilgis: 4 100 mm, valdymo spintos plotis: 1 600 mm, apsaugos tipas (IP kodas): IP65, sukimosi greitis (min.): 1 500 aps./min, temperatūra: 25 °C, įvesties srovės tipas: trifazis, garantijos trukmė: 12 mėnesiai, Įranga: dokumentacija / vadovas, mobilioji dyzelino kuro talpa, The Bredenoord 500 KVA generator is a reliable and versatile solution for both temporary and long-term power requirements in a wide range of environments. This unit is ideal for mobile applications and meets current emission standards. Equipped with a fuel-efficient FPT/Iveco engine paired with a Stamford generator, it delivers excellent performance and low operating costs. The generator features a sound-attenuated canopy, ensuring minimal noise emissions and making it perfectly suited for noise-sensitive locations (super silent). The enclosure is fitted with thick, oil-resistant sound insulation and external socket outlets with circuit breakers for enhanced safety. With a 597-litre fuel tank, the generator offers up to 6 hours of continuous operation. It can run on diesel, HVO, or GTL fuels, offering flexibility in fuel options. Technical Specifications: - Model: Bredenoord 500KVA - Nominal Power: 538 KVA - Maximum Power: 538 KVA - Engine: FPT/Iveco C13TE7 - Generator: Stamford brushless alternator (AVR) - Rated Output: 220–538 kVA - Voltage: 230/400 V, 50 Hz - RPM: 1,500 - Noise Level: 80 dB(A) at 7 metres - Fuel Tank Capacity: 597 litres - Autonomy: - 100% PRP: 6 hours - 70% PRP: 8 hours - Engine Power: 400 KW - Battery Charger and Engine Heater: Standard - Control Panel: Comap MRS16 (auto start/stop) - Dimensions (L x W x H): 4.10 m x 1.60 m x 2.20 m Lodpfxowgkrke Alrsrp - Weight: 4,707 kg - Emission Class: Fuel Consumption: - 100% PRP: 100.6 L/h - 70% PRP: 70.63 L/h - 50% PRP: 51.5 L/h Options: - Engine heater - Battery charger - Three-way fuel valve - XXL fuel tank Sound Attenuation: The generator is designed with optimised air intakes and specialised insulation materials to minimise noise. The sound insulation is reinforced with varying thicknesses of wool to reduce noise across a broad frequency spectrum, making it ideal for deployment in noise-sensitive environments. Durability: The enclosure is corrosion-resistant, coated with paint tested for over 2,000 hours (C5I-H), ensuring a long service life even under challenging conditions. Safety: The generator is equipped with reinforced locks and stainless steel hinges. Doors are designed with a 20° chamfered edge to prevent water ingress and minimise oxidation. Transport and Handling: The generator is easily relocatable thanks to reinforced lifting eyes and steel beams, facilitating straightforward transport on construction sites. The design ensures stable and secure movement of the unit, reducing the risk of damage. Customisation: The Bredenoord 500 KVA generator is available in models ranging from 20 KVA to 600 KVA. Customer-specific modifications are available, allowing the unit to be tailored to particular requirements and applications. Certifications: - CE certified - Made in Europe Applications: This generator is suitable for multiple sectors, including construction, industry, and any other application requiring a reliable and efficient power supply.

Būklė: labai geros būklės (naudotas), bendras ilgis: 3 000 mm, bendras plotis: 1 500 mm, Skydinių plokščių presas labai geros darbinės būklės + Grecon finger jointing Lodst Uduxepfx Alrorp

Būklė: labai geros būklės (naudotas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness with veneer strips (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control/Software: ICOS Open Feed speed (m/min): 10 - 50, without transmission bar (Master & Slave systems) Stop cams retractable, distance (mm): 1080 FORMAT PROCESSING (per side): Protective cutter (pre-milling) 75.186 (1 x kW 4.4) Chipping unit (2 x kW 8) Lsdpfx Alod Nt Rqsrorp Jointing milling unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): Gluing unit (hot melt adhesive) 283.1513 04.1570 + 283.205 Edge pressure zone – edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) Milling unit 08.055 (2 x kW 1) 0° - 30° Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servomotors Profile scraper unit 08.519 Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.617-4 (4 x kW 0.18) Universal milling unit for grooving/rebating and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Būklė: dilaminuotas dirbtuvėje (naudotas), DOUBLE-SIDED SQUARING AND EDGE BANDING MACHINE – 1st machine in line Edge thickness in rolls (min/max): 0.3 / 3 mm Panel thickness (min/max): 8 / 45 mm Working width (min/max): 236 / 1300 mm Control/Software: ICOS Open Feed speed (adjustable): 10 / 50 m/min No transmission bar (Master & Slave systems) Safety and noise protection cabin SQUARING SECTION (per side): Spray unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free position EDGE BANDING SECTION (per side): Gluing unit (Hot Melt + premelter) 04.1570 Pressure zone for edging Edgeband magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flush trimming unit 08.517 Lredpfodh Tfgjx Alrep Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free position