Briaunų klijavimo staklės

HOMAG Аmbition 2260

Būklė: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Iedpfxeqt Dmys Alrjic Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, mašinos/transporto priemonės numeris: 0-200-87-0913, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, briaunos storis (maks.): 3 mm, aukščio reguliavimo tipas: elektrinis, bendras ilgis: 10 825 mm, Įranga: dokumentacija / vadovas, Used single-sided HOMAG edge banding machine, for straight edges; for joint trimming, edge banding, and post-processing of various edging materials. Fixed fence side on the left. Year of manufacture: 2023, initial commissioning Nov. 2023 SPECIFICATIONS / EQUIPMENT: Base machine with 80 mm wide transport chain as workpiece feed device, - Maximum workpiece thickness: 60 mm - Motorized height-adjustable top pressure - Workpiece support with roller rails - Glue pot lift-out at feed stop - Glue roller clamping before workpiece rear edge - (Remote) manual operation for easy machine setup - Adjustable infeed fence via NC axis - Joint trimming unit, climb/counter rotation 2x3kW, operation-controlled Horizontal positioning via NC motor (CAN) GLUING SECTION V20, consisting of: - QA60 glue application unit with PTFE (Teflon) coating - Premelter for PUR adhesive - EVA and PUR adhesives can be processed - Edge magazine, min. 0.4 mm to max. 3 mm edge thickness Iodpfsy D A Swex Alrsic - Pressure zone with automatic horizontal adjustment (NC) to edge thickness, 1 driven / 4 non-driven pressure rollers POST-PROCESSING SECTION: - PK25 cross-cutting unit horizontal, 2 motors each 0.8kW (front/rear edge) Chamfer/straight as well as overhang trimming - Pre-/flush milling unit 1.15 kW, top/bottom - Fine milling unit top/bottom, with NC adjustments - MF60 profile milling unit (corner rounding), 2 motors (top/bottom), servo-controlled with Softtouch - Controlled universal milling unit - Profile scraper top/bottom with exchangeable heads - FA10 flat scraper, top/bottom (version with 3 tracing rollers) - Buffing unit top/bottom CONTROL: - PC 23 powerTouch - woodCommander 5 - Gap-based machine setup - Edge sequence control

Būklė: labai geros būklės (naudotas), 3 ašių (X-Y-Z) CNC apdirbimo centras Judanti plokštė (ruošinys), judantis darbgalvio galva Vertikali plokštė (ruošinys) Valdymas POWERCONTROL + POWERTOUCH Programinė įranga woodWOP Darbinės galvos apsaugos kabina Nr. 1 ruošinio spaustuvų rinkinys darbiniame lauke Ruošinio pavara su transportine grandine Minimalūs ruošinio matmenys (X-Y-Z) mm: 200 x 70 x 12 Maksimalūs ruošinio matmenys (X-Y-Z) mm: 3050 x 850 x 60 Bendra prijungimo galia (kW): 11,5 (apytiksliai) Iodpeyywcvofx Alreic DARBO GRUPĖS: Nr. 1 gręžimo agregatas (galia 2,3 kW) su vertikaliomis ašimis: - Nr. 13 nepriklausomos vertikalios gręžimo ašys (V13 High Speed) - Nr. 6 nepriklausomos horizontalios gręžimo ašys (4 X kryptimi + 2 Y kryptimi) Nr. 1 įpjovimo disko agregatas (darbinis judėjimas X ašyje), skersmuo (mm): 100 Nr. 1 vertikali pagrindinė frezavimo ašis HSK63 (galia 5 kW) Automatinė įrankių keitimo sistema – 4 įrankių vietų žurnalas

Būklė: dilaminuotas dirbtuvėje (naudotas), DOUBLE-SIDED SQUARING AND EDGE BANDING MACHINE – 1st machine in line Edge thickness in rolls (min/max): 0.3 / 3 mm Panel thickness (min/max): 8 / 45 mm Working width (min/max): 236 / 1300 mm Control/Software: ICOS Open Feed speed (adjustable): 10 / 50 m/min No transmission bar (Master & Slave systems) Safety and noise protection cabin SQUARING SECTION (per side): Spray unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free position EDGE BANDING SECTION (per side): Gluing unit (Hot Melt + premelter) 04.1570 Pressure zone for edging Edgeband magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flush trimming unit 08.517 Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free position Iiedpsdh Tfgjfx Alrjc

Būklė: naudotas, mašinos/transporto priemonės numeris: 006042, Priklijuotos briaunos tipas: plona briauna, stora briauna Klijavimo sistema: EVA Sujungimo frezavimas: taip Iiedjwacqlspfx Alrec Daugiafunkcinis agregatas: taip Viršutinis frezavimo agregatas: taip Maks. padavimo greitis: 25 m/min Maksimali plokštės storis: 40 mm Darbo agregatai: 9 vnt.

Būklė: naudotas, mašinos/transporto priemonės numeris: 007848, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Jointing unit: yes Iiodpfx Aljwkrqpsroc Multi-function unit: yes Max. feed speed: 20 m/min Maximum panel thickness: 60 mm Working units: 8 pcs

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, pjovimo matmenys 4300x4300mm pjovimo aukštis 95mm išilginės sijos eiga su griebtuvais 90m/min pjovimo greitis iki 150m/min, tolygiai reguliuojamas Iiedpfx Aleylbdtjrjc pagrindinio variklio galia 13,5kW priešpjovio variklio galia 2,2kW pjaunamojo disko skersmuo 350mm 4 oro stalai nusiurbimo poreikis 3800m3/h išoriniai matmenys 6500x7700mm

Būklė: naudotas, Gamybos metai: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch-screen Industrial conveyor chain 1 1/4" Joint trimming unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunctional profile trimming units CR-202 (FAST system, 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10-65 mm Max. workpiece height with profile trimming unit (depending on profile): 35-65 mm Iisdjv R Nk Uopfx Alrec Edge thickness, coil: 0.4-3 mm Edge thickness, strip material: 0.4-22 mm (depending on unit) Min. workpiece length: 140 mm Min. workpiece width (at length 140 mm): 85 mm Min. workpiece width (at length 250 mm): 50 mm Feed speeds: 10-14-18-20 m/min Central extraction connection: 200 mm Extraction connection (edge banding): 80 mm Extraction connection (joint trimming): 120 mm Glue tank capacity: approx. 3 kg Heat-up time at 1/2 fill: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine offered without the workpiece return device shown in the photos Availability: short-term Location: Flörsheim

Būklė: naudotas, mašinos/transporto priemonės numeris: 006603, Uždedamos briaunos tipas: plona briauna, stora briauna, masyvi mediena Klijavimo sistema: EVA Iiedpeyngz Aefx Alrsc Frezavimas sujungimui: taip Daugiafunkcis agregatas: taip Maks. padavimo greitis: 14 m/min Maksimalus plokštės storis: 60 mm Darbo agregatai: 8 vnt.

Būklė: naudotas, Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Biesse Akron 1400 briaunavimo staklės. Originali JK mašina prieinama demonstracijai: £10 000 + PVM Ši mašina skirta briaunų apipjovimui tiesiai arba su nuolydžiu iki 8 mm storio (ritėje maks. 3 mm). Šiuo metu įrengtos tiesios frezos, tačiau galima sumontuoti kombinuotas frezas spindulinei apdirbai. Ši mašina NEAPVALINA kampų, tačiau turi šiuos mazgus: Išankstinis frezavimas. EVA karšto lydalo klijavimo sistema. Ijdpfexrwm Nox Alroic Galu pjovimo pjūklai (tiesus arba nuožulnus pjūvis). Šiurkštus apipjovimas (viršus ir apačia). Tikslus apipjovimas (viršus ir apačia). Klijų siūlės grandikliai (viršus ir apačia).