Stacionari ištraukimo sistema

Holzing RLA ATEX 5500 m3/h (5,5 kW)

Būklė: naujas, Gamybos metai: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine tilts via handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2800 rpm 400 Volt / 5 kW (S6/40%) motor with brake and automatic star-delta switch Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swiveled to one side to approx. 25° for sharp angles, and tilted flat to the left up to 30° Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg Itedji Dfidspfx Aggen - Immediately available -

Būklė: naujas, Gamybos metai: 2024, Surface Planer Martin T 54 Only with a high-quality surface planer can you truly achieve perfect foundations. The T 54 was developed with precisely this aim in mind. It enables you to dress workpieces easily at the most modern level and safely machine them with four-sided edges. The machine comes standard with a TERSA all-steel cutterblock. The Xplane cutterblock with a pulling cut is available as an optional extra. Chamfering is effortless thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The solid cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require more support area, both the infeed and outfeed tables can each be extended by 380 mm – of course, these extensions are also made of cast iron. Technical data: Table width: 500 mm Table length: 2840 mm Itsdepgkmwjpfx Aggsn Max. cutting depth: 8 mm Cutterblock: Diameter 125 mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorised table adjustment Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa cutterblock 4 knives Location: In stock at 54634 Bitburg - Available immediately -

Būklė: naujas, Gamybos metai: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with forward and reverse rotation Large, cast-iron milling unit mounted directly to the table Under-table extraction hood for improved dust extraction Solid and precise cast iron table Fast and straightforward speed change Powerful 5.0 kW motor Standard curved milling guard Ijdjhp Rcropfx Aggetn Quality made in Italy Equipment Details Cast iron milling unit Directly mounted onto the milling table Milling spindle mounted with high-precision ball bearings in the upper position for minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful Motors Equipped with a high-performance three-phase motor Milling Guard The standard milling guard is supplied as standard for maximum safety, featuring a height-adjustable fence and protective cover. Milling Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw The integrated extraction port ensures an unobstructed view Milling Table Opening A large table opening allows the use of larger panel cutters, tenoning, and slotting tools above and below the table Curved Milling Guard Included as standard Reversible Fence Jaws Versatile, integrated fence to bridge the tool gap enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and Weight Weight (net) approx. 240 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation Information Required length: 1,945 mm Machine body width/depth: 575 mm Required width/depth: 920 mm Working area length: 1,600 mm Explanation required space: The dimensions take into account the maximum travel distances or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Explanation working area: Please add the specified dimensions to the required space to calculate the recommended free setup area for the machine. Electrical Data Supply voltage: 400 V Drive motor power: 5.0 kW Mains frequency: 50 Hz Milling Spindle Usable spindle length: 100 mm Spindle speeds: 3,500/7,000/10,000 rpm Max. spindle protrusion above table: 130 mm Spindle shaft diameter: 30 mm Max. milling tool diameter Max. sinkable tool diameter: 180 mm SCOPE OF DELIVERY Curved milling guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, minimax ti 55es LL – Spindle Moulder Image shows T 55 i elite s standard version Professional workshop machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting. Robust steel and cast iron construction. Large-dimension grey cast iron milling unit, tiltable up to -45° to the rear. Spindle speeds displayed via LEDs. Quick and easy speed change via eccentric clamping. Reversible direction of rotation (right/left). Height and tilt display accurate to 1/10 mm. Heavy-duty industrial fence: with rack-and-pinion fine adjustment, digital display, aluminium fence jaws, 3-position repeat setting for quick adjustment. Scope of delivery: Isdpfxedqzh Rs Aggetn Aluminium fence jaws Curved milling protection hood Table extensions left and right Model: minimax ti 55es LL Article No.: 5502252 Technical data: Worktable dimensions: 2500 x 655 mm Sliding table dimensions: — Usable spindle length: 125 mm Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilting range: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400V / 50 Hz / S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Būklė: naudotas, Formatinė pjovimo staklės SCM 320cm SiX Vežimėlis 320cm, Agregato posvyris į abi puses nuo +45 iki -45 laipsnių, Pjūklo posvyrio ir aukščio reguliavimas motorizuotas, dešinėje pusėje liniuotė reguliuojama elektriškai iki 1500 mm, dvišis priešpjūklis su elektriniu reguliavimu, variklis 7,5 kW, greičiai reguliuojami dažnio keitikliu, maksimalus disko skersmuo 550 mm, Itedpfx Aozd Uf Toggon vežimėlis gali būti sulenktas kampu, naudota staklė, gera būklė, Įrenginys turi naują neoriginalią valdymo sistemą, Visi reguliavimai veikia.

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with Tersa Cutter Block The T45 thickness planer offers ideal conditions for modern manufacturing: It produces smoothly planed surfaces, is quick and simple to operate, and also works exceptionally quietly. The standard electronic control with 99 programmable planing measurements makes setting the planing height so easy that your first workpiece will fit perfectly. The thickness table can be adjusted at the push of a button or incrementally in steps of 0.1 mm. All feed rate control elements are conveniently within reach. The heavy, vibration-dampening composite frame combined with the high-quality precision-mounted cutter block guarantees superior surface quality. Thanks to the sound-insulating construction, even the standard version operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis control for planing dimension, up to 99 values storable, 49 of which can be used for freely programmable planing sequences; buttons for manual rapid and fine adjustment of planing thickness with digital display, push button for cutter block start/stop, integrated operating hours counter • Cutter block: TERSA solid steel cutter block Z4 Ø 125 mm; includes lock for quick and easy knife change • Thickness table: Electronic height adjustment with fine tuning, adjustment speed 10 mm/s, tip-proof supported on 4 lifting spindles, finely planed table surface Iedpfx Asqlckpsggjtn • Feed: 2 speeds 6 / 12 m/min, can be selected electrically even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, quick roller change; segmented pressure bar at infeed • Extraction: Hinged, split hood with chip extraction port Ø 160 mm, can be connected left/right (both sides possible for special applications); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutter block via grease nipples • Accessories: 1 grease gun with long-life grease 1 oil gun 1 open-end wrench 1 tool for knife changing 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Gamybos metai: 2016, būklė: dilaminuotas dirbtuvėje (naudotas), Aggregatas su 2 hidrauliniais spaudimo batučiais iš viršaus, kad būtų galima preciziškai (be poslinkių) spausti suklijuotas lentjuostes mechaninėje presoje. (Užuot naudojus didelį plaktuką ar didelius svorius su krano kabliu) Pavaros pavara: SEW reduktorius su trinties ratu, 1,1 kW Itsdpfx Agod Dcmqsgjn Hidraulinis agregatas: 5,5 kW Alyvos bako talpa: 160 l Slėgis: 40 / 250 bar 2012 m. įrenginys buvo pilnai atnaujintas, sumontuota nauja valdymo spinta ir nauja elektros įranga. Kadangi klientas nesumokėjo įmokų, po maždaug 1,5 metų įrenginį susigrąžinome. Įrenginys buvo naudotas ne daugiau kaip 1 metus, periodiškai.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, Altendorf F45 Elmo, 3 ašių valdymas Stalo vežimėlio ilgis: 3200 mm Itsdpfxsy Sbvke Aggen Pjovimo plotis ties išilginio tvoros: 1300 mm Priekinis pjūklas: paruošta Pjūklo disko aukščio reguliavimas: elektrinis / su padėties valdymu Pjūklo disko pasukimo reguliavimas: elektrinis / su padėties valdymu Išilginio tvoros reguliavimas: elektrinis / su padėties valdymu Skersinio kampainio reguliavimas: rankinis Pjūklo disko kampo indikacija: skaitmeninis ekranas Pjovimo aukščio indikacija: skaitmeninis ekranas Skersinis liniuotė su kampavimo funkcija: taip Pjūklo disko skersmuo: 450 mm Sukimosi greičiai: 4 Variklio galia: 5,5 kW Ištraukimo jungtis: 80 ir 120 mm Duplex kampavimo liniuotė Metai: 2010 Kaina: 15500.-

Būklė: naudotas, Techniniai duomenys: Maks. obliavimo plotis: 630 mm Maks. obliavimo aukštis: 300 mm Peilio veleno skersmuo: 120 mm Peilių kiekis: 4 Stalviršio volelių kiekis: Padavimo greitis: 5/8/12/18 m/min Elektrinis kėlimas Nusiurbimo antgalis: 150 mm Iodpfx Agexz Dlkjgotn Energijos tiekimas: 400 V Variklio galia: 7 kW Bendri matmenys: Ilgis: 1280 mm Plotis: 630 mm Aukštis: 1200 mm

Būklė: naujas, Gamybos metai: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to precision components and heavy-duty cast-iron construction Front steel infeed roller with helical gearing for optimal material feed Satin-finished steel outfeed roller, optionally with rubber-coated roller The worktable is mounted on four large columns, ensuring maximum stability under all operating conditions. Thickness table adjustment via handwheel with numeric display for set planing height (accurate to 0.1 mm) Standard with two feed speeds, conveniently selectable from the operator’s panel Powerful industrial motor Robust steel and cast-iron construction Equipment details: Iodpfxod Hx Hpj Aggjtn Worktable Mounted on four oversized spindles for maximum stability under all conditions The special lifting mechanism maintains table position perfectly even without locking Tersa planing cutterhead No more setting or screwing Knife changes in seconds Self-locking system Motorized thickness table adjustment on S 52 elite s Height adjustment of thickness table motorized, with electronic decimal display Greater precision and user convenience Dimensions and weights Length approx. 1080 mm Width/depth approx. 1440 mm Weight approx. 455 kg Dust extraction connection Extraction port diameter thickness: 120 mm Drive power Main motor: 7 kW Installation information Required length: 1440 mm Required width/depth: 1071 mm Required height: 1088 mm Space requirements explanation: Dimensions consider maximum travel or working length. Machine body length: 1030 mm Machine body width/depth: 998 mm Length: 1000 mm Width: 1800 mm Working area explanation: Add given values to space requirements to determine recommended free installation space for the machine. Thickness Thickness table length: 520 mm Thickness table width: 850 mm Min. working height: 3 mm Max. working height: 240 mm Min. working length: 220 mm Max. depth of cut: 5 mm Electrical data Connection voltage: 400 V Planing cutterhead Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min