Spaudos stabdys

Hess LAMIELLIEPRESSE

Sąlyga: naudotas, Number of spindles: 6 pcs. Working width: 240 mm Planing height: 200 mm Surface table length: 2500 mm Feed motor: 4 kW Feed speed: 6-36 m/min Dimensions (L x W x H): 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31, also suitable for window production ----- Knedpsvnv Uzsfx Afpsd The machine has been cleaned and functionally tested! Technical data: ----- Maximum working width: 240 mm Maximum working height: 200 mm Feed: 6 to 36 m/min 1st spindle ----- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd HSK tool holder ----- First right tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3rd HSK tool holder ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Additional technical features: ----- 2 feed units after the upper spindles to reduce the axle spacing from 620 mm to 450 mm Air-cushion lubrication on the worktable 2 x milling units with belt drive and quick-change HSK 85 system in positions 2 – 3 Working height of 200 mm instead of 120 mm 5 x electronic horizontal positioning positions (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning positions (2 – 3 – 5 – 6) 3 x electronic tool diameter setting (setup) positions (3 – 4 – 5) Mobile 10 control PRL equipment for cutting out the glazing bead on 2nd upper horizontal spindle Machine is supplied without processing tools (Technical data according to manufacturer's information—no guarantee!)

Sąlyga: naudotas, Gamybos metai: 2006, Gamintojas: Weinig Modelis: Unimat Super 4 Pagaminimo metai: 2006 Keturių pusių obliavimo staklės Gamintojas: WEINIG, restauruotos Modelis: UNIMAT SUPER 4 su trumpų ruošinių mechanizacija EM15 - Pagaminimo metai: 2006 Techninės specifikacijos - Darbinis plotis: maks. 150 mm - Darbinis plotis: min. 25 mm - Darbinis aukštis: maks. 50 mm - Darbinis aukštis: min. 15 mm - Velenų skaičius: 3 - Viršutinio veleno galia: 22 kW - Apatinio veleno galia: 11 kW - Velenų apsisukimų skaičius: maks. 7.000 aps./min - Veleno skersmuo: 40 mm - Stalo ilgis: 2.000 mm - Maks. padavimo greitis: 24 m/min - Nuolatinis padavimo greičio reguliavimas - Atskiras variklis kiekvienam velenui - Padavimo volas su kardanine pavara - Padavimas iš žurnalo - Motorizuotas obliavimo aukščio reguliavimas - Automatinė tepimo pompa - WEINIG veidinio frezavimo galvutė - WEINIG EM 15 - Bendra galia: 45 kW Knsdpfx Aoqprk Tsfped

Gamybos metai: 1998, Sąlyga: paruoštas naudoti (naudotas), An angular unit for window and door production by Weinig is available. Maximum tool outer diameter: 320 mm, maximum tool cutting circle: 232 mm, slot spindle length: 640 mm, profiling and feed-synchro length: 285 mm – 320 mm, control: Siemens WS400. Includes complete tooling set and sash window components. Documentation available. Kjdpstq U A Iefx Afpond

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Lisec IG-line for double and triple glazing units up to 2500 x 1600 mm, year of manufacture 1993–1999, consisting of: - RTV-38/16WE, washing machine infeed conveyor, 1993 - VHW-16V8, glass washing machine with 8 brushes for Low-E, 2 hot water tanks, 2 sand filters, and blower, 1993 - RTVB-16/16ST, washing machine outfeed conveyor, 1997 - Sofsolution line scanner Kodpfxsr Iil Es Afpjnd - RTVB-11/16 ST, infeed conveyor for frame set, 1997 - RSVB-27/16, frame set section, 1997 - RTVB-27/16MZ, measuring station for gas filling press, 1997 - FPS-25/16U, argon gas filling press, 1997 - RTVB-22/16ST, press outfeed conveyor 1, 1997 - RTVB-22/16ST, press outfeed conveyor 2, 1997 - RTVB-27/16ST, press outfeed conveyor 3, 1997 - RTVB-11/16, infeed conveyor for cork applicator, 1997 - APK-3/16, automatic cork applicator, 1997 - RTVB-11/16, outfeed conveyor for cork applicator, 1997 - RTVB-11/16VE, infeed conveyor for sealing machine, 1999 - VL-1N/16, automatic sealing machine for double and triple glazing units, 1999 - VLA-25, VL extension with corner correction rollers, 1999 - DOS-1/PU, mixing and dosing station for PU, with nozzle removal device, 1999

Gamybos metai: 1997, Sąlyga: labai geros būklės (naudotas), Window manufacturing machines WEINIG Kjdpfx Asiix Uvsfpend Tenoning and slotting machine UNITEC 10, year 1997 Profiling and rebate milling machine UNIVAR 10, year 1997

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Pilnai veikiantis UniControl 12, 2006 metų modelis iš Norvegijos. - Norėdami pamatyti tikslias technines specifikacijas, atidarykite toliau prisegtą PDF dokumentą. UniTec 12 skerspjūvis: - pjovimo mazgas - apačioje esantis briaunų apvalinimo freza - Pakėlimo velenas Nr. 1 Ksdpfx Ajmgc I Nsfpjnd - Pakėlimo velenas Nr. 2 - Pakėlimo velenas Nr. 3 Ilgas, profilio modulis UniVar 12: - Profilio freza - Profilio freza - Profilio freza horizontali - Profilio freza - Profilio freza - Profilio freza Bendra elektros galia 114 kW, 400 V AC Siurbimo poreikis – 270 m³/min Suspausto oro poreikis – 1000 l/min Staklės buvo naudojamos iki 2023-08-15. Apmokėjimas: prieš pakraunant Pristatymas: iš gamyklos Rendalen, Norvegija Staklės yra Norvegijoje (netoli Trondheimo) Šiuo metu atjungtos, laikomos sausame ir šiltame sandėlyje, paruoštos išsiuntimui. Rekman Maskin & Service – medienos apdirbimo staklių servisas nuo 1986 m.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Set for producing finger-joint connections for medium and large-scale production. The machine is technically efficient and in good condition. The set includes several tool kits. Characteristics: – Industrial set with one tenoner. Batch feeding under operator supervision enables processing of lower grade raw material as well, – Operation controlled by microprocessors (automatic control), – Batch rotation after each operation on a rotary table (straight finger-joint connection) or tilting the batch rearward (furniture joint on a line; unique GOMA solution), – The set includes an automatic loading station for the press, – Possibility to use mid-cutting on the press, TENONER WITH FEED TABLE Specification Values Milling spindle diameter 50x210 mm Spindle speed 6000 rpm Knodslu D Tfspfx Afpsd Motor 18.5 kW Tool dimensions 250x160 mm Saw spindle for end trimming Special chipper 300x8 mm Motor 6 kW / 3000 rpm Stepless feed table Working width x height 600 x 30-160 mm Glue nozzle outline according to tool FC-10 PZ6/2 PRESS Specification Values Board width 30-160 mm Board thickness 20-70 mm Finished board length 6000 mm Pressing force 3 - 7.5 - 10 T Hydraulic pump 3 kW / 140 bar

Sąlyga: geras (naudotas), Gamybos metai: 2007, Technische Merkmale: - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Tiefe bei max. Zapfendurchmesser 320 mm: 105 mm - Zapfenwagen-Geschwindigkeit min./max.: 0/100 m/min Ksdot R T Hcopfx Afpond - Min./max. Profiliergeschwindigkeit: 3/15 m/min Zapfenbearbeitung: 1. Endabschneidsäge - 5,5 PS (4 kW) - Sägeblatt-Ø 400 mm 2. Zapfenfräser - Gegenlager 50 x 620 mm - 15 PS (11,3 kW) - Max. Werkzeug-Ø 320 mm - Achshub 575 mm - Automatischer Splitterschutz 3. Zapfenfräser - Gegenlager 50 x 620 mm - 15 PS (11,3 kW) - Max. Werkzeug-Ø 320 mm - Achshub 575 mm - Automatischer Splitterschutz - Vertikale Positionierung mit durchgehender Achse 4. Digitale Winkeleinstellungsspannung Profilieren: 5. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Achshub 280 mm - Zeitverzögerte Splitterschutzvorrichtung bei Kalibrierung - Doppelte Drehrichtung - Vertikale und horizontale Positionierung mit durchgehender Achse 6. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Achshub 280 mm - Vertikale und horizontale Positionierung mit durchgehender Achse 7. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Vertikale und horizontale Positionierung mit durchgehender Achse 8. Abschluss-/Aufnahmestation - Vertikale und horizontale Positionierung mit durchgehender Achse - Vorrichtung zum Ausziehen des Fensterladens - Hfutwt78Z 9. Untere horizontale Nutwelle - Vertikale und horizontale Positionierung mit durchgehender Achse - 88,5 PS (66,4 kW) 10. Digitale Führung 11. Teile-Rückführung zum Bediener

Sąlyga: naujas, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 pcs. S&S electro-hydraulic frame press machine, type Super Options: Working widths from 3,000 mm up to 5,000 mm Working heights from 2,000 mm up to 3,000 mm Optional equipment such as center pressure beam, tilting sash device, counter profiles for single-part production, and much more! Please request our complete price list! Description: With automatic adjustment for mortise and tenon corner joints (other corner joints available as option), CE specification The only fully automatic, self-adjusting high-performance frame press in which pre-positioning of the timber components is not required. Width and height adjustments are made automatically, without any time loss, immediately after direct insertion of the workpieces into the pressing area. No repositioning of the timbers is necessary. Base machine features a heavy-duty welded frame construction using oversized, thick-walled special profiles. Guideways of the press corners on the pressure beams are designed for minimal wear. Knedsd Rzc Repfx Afped Continuous counter bearing on the stop side for width pressing, built in a torsion-resistant design, mounted to the machine base. Continuous lower counter bearing in extremely robust, torsion-resistant design, connected to both the base frame and the machine. Insertion height 500 mm. All counter bearings are finely adjustable for absolute angular precision and long-term accuracy. Sliding carriage on the right with rapid, motorized width adjustment, guaranteeing parallel travel, includes automatic hydraulic locking: Central drive for dimension adjustment both horizontally and vertically, with high adjustment and travel speed, and automatic width and height adjustment (opto-electronically controlled). 2 double-acting vertical pressure cylinders, piston diameter 50 mm, 250 mm stroke, adjustable pressure force from 400 to 2000 kg. 2 double-acting horizontal pressure cylinders, piston diameter 40 mm, 80 mm stroke, adjustable pressure force from 250 to 1250 kg. Upper right press corners, heavy-duty, machined design with automatic corner positioning. Floating press corners Contact surfaces with adhesive-repellent finish. Counterbearing and pressure plate depth 100 mm. 8-way holding and positioning device for completely loose insertion of all single timber pieces into the press area (no pre-arranging or pre-positioning required). Each frame element is held and positioned twice. Automatic lifting function allows for ergonomic insertion of the upper transverse timber on tall frames at a user-friendly height. Increases work safety by enabling floor-level operation—no ladders or steps required. All frame members are placed directly into the pressing area. Program selection options: Manual, motor-driven via pushbutton, Fully automatic via optoelectronic measurement, including automatic pressing cycle combined with safety light barrier. Automatic, cycle-controlled pressing sequence via pulse input: Vertical pressing – release – horizontal pressing – release – vertical/horizontal pressing. Control cabinet mounted on the left side of the base frame for easy servicing. Fast, optoelectronic dimension adjustment. Compact hydraulic unit, adjustable from 20 to 100 bar. Freely programmable electric manual control for efficient operation, especially with large or complex frame assemblies (...

Sąlyga: naudotas, Planer and moulder Weinig Hydromat 2000 for four-sided planing and profiling of timber with groove bed, without soundproof cabin. Spindles: 5 Spindle 1: Bottom / 7.5 kW Spindle 2: Right / 7.5 kW Spindle 3: Left / 11 kW Spindle 4: Bottom / 11 kW Kjdpfx Afsrmvhfspsnd Spindle 5: Top / 15 kW Working width: 230 mm Working height: 160 mm Spindle diameter: 50 mm