Juostinis pjūklas

Canali TMA 1250

Sąlyga: naujas, Swing diameter: 420 mm Turning length: 1,500 mm Swing diameter over cross slide: 250 mm Swing diameter in bed gap: 590 mm Center height: 210 mm Turning length in bed gap: 260 mm Spindle speeds: 16 (45-1,800) rpm Tailstock taper: MT 4 Quill stroke: 120 mm Quill diameter: 50 mm Spindle nose: DIN ISO 702-2 No. 6 Spindle bore: 52 mm Spindle taper: MT 6 Longitudinal feed: 17 / 0.05 - 1.7 m/min Cross feed: 17 / 0.025 - 0.85 m/min Total power requirement: 4.6 kW Machine weight approx. 1,340 kg Space requirement approx. 2,440 x 915 x 1,375 mm Fully equipped lead- and feed-screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mounting Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduations 0.04 / 0.02 mm - Four-way tool post - All guides adjustable via gib strips - Compound slide travel range ±90° - Guaranteed spindle nose runout accuracy better than 0.015 mm - Main spindle runs in oil bath - Gearwheels smoothly running, hardened and ground, supported by two adjustable precision tapered roller bearings - Handwheels decoupled and tested in accordance with EN 23125 - Two-channel forward/reverse switch tested according to EN 23125 - Switches with lifecycle calculation, tested according to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI selectable via control levers without changing gears - Forward/reverse switchable on bed slide via leadscrew - Central lubrication on bed slide - Base and machine bed cast in one piece from Meehanite casting - Leadscrew cover - Emergency stop device with foot pedal - Safety handwheels with disengagement function on X and Z axes - Tailstock adjustable by ±10 mm for taper turning - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment via clamping lever - Deep-ribbed prism bed, induction hardened and precision ground from grey cast iron - Coolant system with separate coolant tank, level indicator and oil separator; easy and complete draining and cleaning according to DIN - LED machine lamp in chip guard Models TH 4210D and TH 4215D with digital position indicator DPA21: - User-friendly membrane keypad, splash proof, sealed and anti-glare - Glass scales Scope of delivery: - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MT 6 / MT 4 - Fixed center MT 4 - Change gear set - Position stop with fine adjustment Djdpfx Abok Egrpe Soul - Initial fill with quality oil - Operating tools Including special accessories: OPTIMUM 3-jaw chuck, centrically clamping, Ø 250 mm Quick-change tool post SWH5-B set

Sąlyga: naudotas, Gamybos metai: 1985, Svoris: apie 3000 kg Matmenys: apie 3700 x 2000 x 1600 mm Sandėliavimo vieta: Nattheim Dodpjvvi Ttsfx Ab Soul

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1996, A Weimer pallet stacking machine with the required conveyor technology is available. Pallet dimensions min.-max. X/Y: 600mm–1600mm/500mm–1500mm. Capacity: Up to approx. 8 pallets/min. Swiveling gripper arms: 90°. Documentation available. An on-site inspection is possible. Dedpfx Ajtpct Esb Sjul

Sąlyga: naudotas, Working width: 1350 mm Number of sanding units: 2 pcs. Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 Dedpfx Asrmucxeb Soul - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 - Rubber-coated SANDING ROLLER mm: 180 - SANDING PAD WIDTH mm: 50 - BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER HP: 0.75 - Variable speed drive for feed carpet, continuously adjustable SPEED m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR HP: 0.33 - Mechanical BELT OSCILLATION “ECO GEAR PATENT SYSTEM” - 1 pc. DRUM BRAKE for belt braking - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS; rubber-coated - EMERGENCY STOP STRIP at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 pcs. ROLLER TABLES with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED CARPET - 1 EXTRACTION PORT with 160 mm diameter - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system: 1. Without valves 2. Without photoelectric barrier 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system operates continuously without lateral belt run-off! - Unitek steel calibration roller (same for all models) - Unitek flexible pressure pad before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set with 6 positions (per piece – same for all models) - Unitek electronically segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor power up to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller table with 4 rollers (same for all models) - Price per roller table - Unitek electronic control of machine functions with 12" touchscreen (same for all models) Automatic workpiece scanning with feed control --- Machine price in above configuration upon request! --- Options at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): €8,390.00 Freight costs: €1,300.00 Assembly and instruction: €1,300.00 --- All prices stated are net prices plus statutory VAT (19%) --- (Technical data as per manufacturer – subject to change and errors excluded!)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Pilnai veikiantis UniControl 12, 2006 metų modelis iš Norvegijos. - Norėdami pamatyti tikslias technines specifikacijas, atidarykite toliau prisegtą PDF dokumentą. UniTec 12 skerspjūvis: - pjovimo mazgas - apačioje esantis briaunų apvalinimo freza Dodomgc I Nepfx Ab Ssul - Pakėlimo velenas Nr. 1 - Pakėlimo velenas Nr. 2 - Pakėlimo velenas Nr. 3 Ilgas, profilio modulis UniVar 12: - Profilio freza - Profilio freza - Profilio freza horizontali - Profilio freza - Profilio freza - Profilio freza Bendra elektros galia 114 kW, 400 V AC Siurbimo poreikis – 270 m³/min Suspausto oro poreikis – 1000 l/min Staklės buvo naudojamos iki 2023-08-15. Apmokėjimas: prieš pakraunant Pristatymas: iš gamyklos Rendalen, Norvegija Staklės yra Norvegijoje (netoli Trondheimo) Šiuo metu atjungtos, laikomos sausame ir šiltame sandėlyje, paruoštos išsiuntimui. Rekman Maskin & Service – medienos apdirbimo staklių servisas nuo 1986 m.

Sąlyga: labai geros būklės (naudotas), Rąstų žievinimo linija Cambio, maks. žievinimo skersmuo 450 mm, skersinis padavimo transporteris, ilgis 12,5 m Djdpfx Aowvhkveb Sjul

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 1984, Max. turning length: 1200 mm Djdpfxsp Dt Tws Ab Soul Max. turning diameter: 250 mm 2 hydraulic tracing slides Spindle motor: 5.5 kW Hydraulic motor: 2.2 kW

Sąlyga: naujas, Gamybos metai: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Dodpfsizkhvox Ab Sjul Swivel adjustment with hand crank: yes Roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction connection: 100 mm Roller conveyor length: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, veikimo valandos: 30 h, Funkcionalumas: visiškai funkcionalus, Automatinis juostinių pjūklų galandimo įrenginys – ISELI BAP110 ISELI BAP110 yra moderni, pilnai automatinė juostinių pjūklų galandimo staklė, sukurta maksimaliai precizijai, efektyvumui ir patogumui užtikrinti. Automatizuotas galandimo procesas užtikrina tolygų bei aukštos kokybės pjūklų dantų apdirbimą – su minimaliomis darbo sąnaudomis. 🔹 Pilnai automatinis veikimas 🔹 Tiksliai reguliuojama dantų forma ir žingsnis 🔹 Lankstus pritaikymas skirtingiems juostiniams pjūklams 🔹 Intuityvus valdymas su vartotojui draugiška sąsaja Įrenginys ypač tinkamas lentpjūvėms ir galandimo dirbtuvėms, kurios siekia nuolatinės aukštos pjovimo kokybės ir optimizuoto proceso laiko. Duodpfsv Tltdox Ab Sol

Sąlyga: geras (naudotas), Well-maintained horizontal sawmill. Passage width: 1000 mm. Stroke: 800 mm. Feed electronically adjustable. Clamping carriage approx. 7.5 m long with 5 hydraulic clamping units. Can still be inspected in operation. Dsdpfjunhl Ujx Ab Seul